LM4301TADDC PFXLM4301TADDC Pro-face Overlay Touch Glass
- Model
- LM4301TADDC PFXLM4301TADDC
Item specifics
- Brand
- Proface
- Size
- 5.7 inch
- Warranty
- 365 Days
- Product Line
- Proface LT4000M Series
- Supply
- LT4000M Front Overlay Touch Digitizer Glass
- Shipping
- 2-4 workdays
- Part Number
- LM4301TADDC PFXLM4301TADDC
Review
Description
Proface LT4000M LM4301TADDC PFXLM4301TADDC Protective Film Touch Digitizer Glass Repair
Order each part separately is available
LM4301TADDC PFXLM4301TADDC Maintenance
NEVER touch a live power terminal. Doing so could cause an electrical shock or a machine malfunction.
To prevent an electrical shock, unplug the LM4301TADDC PFXLM4301TADDC Touch Digitizer Glass Front Overlay unit's power cord before either cleaning the LT or attaching/detaching the power terminal attachment screws.
Do not connect or disconnect Host and LM4301TADDC PFXLM4301TADDC Touch Screen Protective Film unit communication cables while the LT is turned ON.
Do not replace the LM4301TADDC PFXLM4301TADDC Front Overlay Touch Panel unit's battery yourself. The LT uses a lithium battery for backing up its internal clock data and the battery may explode if it is replaced incorrectly. When replacement is required, please contact your local LT distributor.
5.7" Operator Interface Plus Control LM4301TADDC PFXLM4301TADDC Protective Film HMI Panel Glass LT4000M Features:
• 5.7-inch (QVGA 320x240) Stand Alone Graphic Controller
• Ladder logic for simple machine control
• Built-in 16 discrete inputs, 16 outputs and up to 3 EXM modules
• All-in-one operator interface plus control solution reduces wiring, system cost, maintenance cost and space.
• Ethernet port for data management
• Serial port to communicate to temperature controllers.
Specifications:
The table below describes the parameters of the Proface LT4000M LM4301TADDC PFXLM4301TADDC Touch Digitizer Protective Film HMI Machine.
| Ambient Humidity: | 10 to 90%RH (no condensation) |
| Backlight: | White LED |
| Brand: | Proface |
| Product Line: | Proface LT4000M |
| Touch Size: | 5.7" |
| Display Colors: | 65,536 colors |
| Display Type: | TFT Color LCD |
| Power Supply: | 24 V DC |
| Resolution: | 320 x 240 pixels |
| Warranty: | 12-Month Warranty |
Related Proface LT4000M Series Part No. :
| Pro-face LT4000M | Description | Inventory status |
| LM4201TADAC | Pro-face LT4000M HMI Panel Glass Protective Film | Available Now |
| LM4201TADAK | Proface LT4000M Front Overlay Touch Screen Monitor | In Stock |
| LM4201TADDC | Proface LT4000M Touch Screen Protective Film Replacement | In Stock |
| LM4201TADDK | Proface LT4000M Protective Film Touch Panel Repair | Available Now |
| LM4301TADAC | Proface LT4000M Protective Film Touchscreen Repair | In Stock |
| LM4301TADAK | Proface LT4000M HMI Touch Screen Glass Protective Film | Available Now |
| LM4301TADDC | Proface LT4000M Touch Screen Panel Front Overlay Repair | In Stock |
| LM4301TADDK | Pro-face LT4000M Front Overlay Touch Membrane | In Stock |
| Proface LT4000M | Description | Inventory status |
Proface LT4000M Series HMI Manuals PDF Download:
FAQ:
Question: LM4301TADDC PFXLM4301TADDC Protective Film Touch Digitizer Glass LT4000M Series USB Cable Clamp Attachment
Solution:
(1) Before starting the procedure, pull out the USB cover from the USB holder by holding the top and bottom of the USB holder and pressing down the tab on the USB cover.
(2) With the main unit display part positioned so that it is facing down, attach the USB holder to the USB host interface. Insert the picks on the top of the USB holder into the attachment holes on the main unit, and then insert the holder into the USB host interface so that the holder is secured in the main unit.
(3) Insert the USB cable into the USB Host Interface.
(4) Attach the USB cover to the USB host interface. Hold the USB cover in the orientation shown in the figure and insert it into the USB holder.
Common Misspellings:
LM4301TADDC PFXLM401TADDCLM4301ADDC PFXLM4301TADDC
ML4301TADDC PFXLM4301TADDC
LM43017ADDC PFXLM4301TADDC
LM4301TADDC PFXLM43001TADDC
