LT3300-L1-D24-C LT3300-L1-D24-K Touch Glass Overlay

Order each part separately is available

5.7" Operator Interface Plus Control LT3300-L1-D24-C PFXLT3300LADC LT3300-L1-D24-K PFXLT3300LADK Protective Film HMI Panel Glass LT3300 Features:
• 5.7-inch (QVGA 320x240) Stand Alone Graphic Controller
• Ladder logic for simple machine control
• Built-in 16 discrete inputs, 16 outputs and up to 3 EXM modules
• All-in-one operator interface plus control solution reduces wiring, system cost, maintenance cost and space.
• Ethernet port for data management
• Serial port to communicate to temperature controllers.

LT3300-L1-D24-C PFXLT3300LADC LT3300-L1-D24-K PFXLT3300LADK Maintenance
 NEVER touch a live power terminal. Doing so could cause an electrical shock or a machine malfunction.
 To prevent an electrical shock, unplug the LT3300-L1-D24-C PFXLT3300LADC LT3300-L1-D24-K PFXLT3300LADK Touch Digitizer Glass Front Overlay unit's power cord before either cleaning the LT or attaching/detaching the power terminal attachment screws.
 Do not connect or disconnect Host and LT3300-L1-D24-C PFXLT3300LADC LT3300-L1-D24-K PFXLT3300LADK Touch Screen Protective Film unit communication cables while the LT is turned ON.
 Do not replace the LT3300-L1-D24-C PFXLT3300LADC LT3300-L1-D24-K PFXLT3300LADK Front Overlay Touch Panel unit's battery yourself. The LT uses a lithium battery for backing up its internal clock data and the battery may explode if it is replaced incorrectly. When replacement is required, please contact your local LT distributor.