LM4201TADAK PFXLM4201TADAK Touch Glass Overlay
LM4201TADAK PFXLM4201TADAK Touch Glass Overlay
LM4201TADAK PFXLM4201TADAK Touch Glass Overlay
LM4201TADAK PFXLM4201TADAK Touch Glass Overlay
LM4201TADAK PFXLM4201TADAK Touch Glass Overlay
LM4201TADAK PFXLM4201TADAK Touch Glass Overlay
Model
LM4201TADAK PFXLM4201TADAK

Item specifics

Brand
Proface
Size
3.5 inch
Warranty
365 Days
Product Line
Proface LT4000M Series
Supply
LT4000M Touch Digitizer Glass Front Overlay
Shipping
2-4 workdays
Part Number
LM4201TADAK PFXLM4201TADAK

Review

Description

Proface LT4000M LM4201TADAK PFXLM4201TADAK Touch Digitizer Glass Protective Film Repair Replacement

Order each part separately is available

Proface LT4000M LM4201TADAK PFXLM4201TADAK Touch Screen Panel Front Overlay Repair Replacement

The following rules must be applied when wiring a LM4201TADDC PFXLM4201TADDC Touch Membrane Protective Film LT:
 Input/Output and communication wiring must be kept separate from the power wiring. Route these 2 types of wiring in separate cable ducting.
 Verify that the operating conditions and environment are within specification.
 Use proper wire sizes to meet voltage and current requirements.
 Use copper conductors.
 Use twisted-pair, shielded cables for analog, and/or fast Input/Output.
 Use twisted-pair, shielded cables for networks, and fieldbus.
 For the power connector, refer to DC power supply wiring diagram.
 When terminals A2 and B2 (signal name: Q1, Q0) are wired to external I/O, use the same power source for external I/O and the LM4201TADDC PFXLM4201TADDC Front Overlay HMI Panel Glass LT. Refer to Power Supply Connections.
 If you use a temperature sensor with thermocouple inputs, make sure you use the compensation cable.
 Prevent temperature changes to the thermocouple connection terminal. Correct temperature measurement may not be possible if the thermocouple cold junction (LT's thermocouple compensation wiring to the connection terminal) experiences temperature changes.


LM4201TADAK PFXLM4201TADAK Maintenance
 NEVER touch a live power terminal. Doing so could cause an electrical shock or a machine malfunction.
 To prevent an electrical shock, unplug the LM4201TADAK PFXLM4201TADAK Touch Digitizer Glass Front Overlay unit's power cord before either cleaning the LT or attaching/detaching the power terminal attachment screws.
 Do not connect or disconnect Host and LM4201TADAK PFXLM4201TADAK Touch Screen Protective Film unit communication cables while the LT is turned ON.
 Do not replace the LM4201TADAK PFXLM4201TADAK Front Overlay Touch Panel unit's battery yourself. The LT uses a lithium battery for backing up its internal clock data and the battery may explode if it is replaced incorrectly. When replacement is required, please contact your local LT distributor.




Specifications:

The table below describes the parameters of the Proface LT4000M LM4201TADAK PFXLM4201TADAK Protective Film Touch Digitizer HMI Machine.

Ambient Humidity: 10 to 90%RH (no condensation)
Backlight: White LED
Brand: Proface
Product Line: Proface LT4000M
Touch Size: 3.5"
Display Colors: 65,536 colors
Display Type: TFT Color LCD
Power Supply: 24 V DC
Resolution: 320 x 240 pixels
Warranty: 12-Month Warranty


Related Proface LT4000M Series Part No. :

Pro-face LT4000M Description Inventory status
LM4201TADAC Pro-face LT4000M HMI Panel Glass Protective Film Available Now
LM4201TADAK Proface LT4000M Front Overlay Touch Screen Monitor In Stock
LM4201TADDC Proface LT4000M Touch Screen Protective Film Replacement In Stock
LM4201TADDK Proface LT4000M Protective Film Touch Panel Repair Available Now
LM4301TADAC Proface LT4000M Protective Film Touchscreen Repair In Stock
LM4301TADAK Proface LT4000M HMI Touch Screen Glass Protective Film Available Now
LM4301TADDC Proface LT4000M Touch Screen Panel Front Overlay Repair In Stock
LM4301TADDK Pro-face LT4000M Front Overlay Touch Membrane In Stock
Proface LT4000M Description Inventory status


Proface LT4000M Series HMI Manuals PDF Download:

  • LT4000M 3.5 in. Datasheet
  • LT4000M 5.7 in. Datasheet
  • LT-4201TM LT-4301TM Hardware Manual
  • LT-4201TM LT-4301TM Installation Guide
  • PFXLM4201TADDC Specifications

  • FAQ:

    Question: LM4201TADAK PFXLM4201TADAK Protective Film Touch Digitizer Glass LT-3300 Series USB Cable Clamp Attachment

    Solution:
    (1) Before starting the procedure, pull out the USB cover from the USB holder by holding the top and bottom of the USB holder and pressing down the tab on the USB cover.
    LM4201TADAK PFXLM4201TADAK Protective Film Touch Digitizer Glass LT-3300 Series USB Cable Clamp Attachment
    (2) With the main unit display part positioned so that it is facing down, attach the USB holder to the USB host interface. Insert the picks on the top of the USB holder into the attachment holes on the main unit, and then insert the holder into the USB host interface so that the holder is secured in the main unit.
    LM4201TADAK PFXLM4201TADAK Protective Film Touch Digitizer Glass LT-3300 Series USB Cable Clamp Attachment
    (3) Insert the USB cable into the USB Host Interface.
    LM4201TADAK PFXLM4201TADAK Protective Film Touch Digitizer Glass LT-3300 Series USB Cable Clamp Attachment
    (4) Attach the USB cover to the USB host interface. Hold the USB cover in the orientation shown in the figure and insert it into the USB holder.
    LM4201TADAK PFXLM4201TADAK Protective Film Touch Digitizer Glass LT-3300 Series USB Cable Clamp Attachment

    Common Misspellings: 

    LM4201TADAK PFXLM4201TDAK
    LM4201ADAK PFXLM4201TADAK
    LM4201TADAK PFXL4M201TADAK
    LM4201TADAK PFXLM42017ADAK
    LM42011TADAK PFXLM4201TADAK