ETT-VGA-6545 Protective Film HMI Touch Panel Repair
- Model
- ETT-VGA-6545
Item specifics
- Brand
- UniOP
- Warranty
- 365 Days
- Product Line
- UniOP ETT-VGA series
- Supply
- ETT-VGA-6545 Front Overlay HMI Touch Glass
- Model
- ETT-VGA-6545
- Size
- 10.4 inch
Review
Description
UniOP ETT-VGA series HMI ETT-VGA-6545 Touch Screen Panel Front Overlay Repair
VICPAS supply ETT-VGA-6545 Front Overlay Touch Screen Monitor UniOP ETT-VGA with 365 Days warranty and support Urgent Worldwide Shipping.
ETT-VGA-6545 Touch Screen Panel Overlay HMI Features:
NEMA 4/12 compliant enclosure
CE approved
UniNET network capabilities
ETT-VGA-6545 Keyboard Macro Editor
Recipe Configuration
One RS-232 / RS-422 / RS-485 / 20mA current loop serial port, speeds up to 38,400 baud for direct PLC connection
One RS-232 port for PC or printer communications
One auxiliary port for high speed bus network communications
TFT active matrix or passive color STN ETT-VGA-6545 display
Real time clock with battery back-up
2 MB internal memory SSFDC Card
Optional 4 MB memory upgrade (4 MB total memory)
Unlimited number of variables per page
1024 prioritized alarms
Historical event list (last 256 events)
Eight-level password protection
Prints reports, alarm list, and event list to serial printer
Analog ETT-VGA-6545 touchscreen
Specifications:
The table below describes the parameters of the ETT-VGA-6545 UniOP ETT-VGA Touch Panel Front Overlay.
| Part Number: | ETT-VGA-6545 |
| Display Type: | TFT |
| Resolution: | 640x480 pixel |
| Backlight: | CCFL |
| Warranty: | 365 Days |
| Input Power: | 24VDC (+10%, -15%) |
| Touch screen: | Resistive |
| Product Line: | UniOP ETT-VGA series |
| Operating Temperature: | 0 to 45 °C |
| Storage Temperature: | -20 to +70 °C |
Related UniOP Series Part No. :
| UniOP eTOP | Description | Inventory status |
| ECT-VGA-0045 | Exor UniOP Touch Screen Monitor Overlay Repair | In Stock |
| EK-41 6ZA925-7 | Membrane Keyboard Keypad UniOP Replacement | Available Now |
| EK-42 6ZA987-7 | UniOP Membrane Keypad Switch Repair Part | In Stock |
| EL-25T-0042 | Exor UniOP Touch Screen Panel Protective Film | In Stock |
| ER-25T-0045 | UniOP HMI Touch Screen Front Overlay Replacement | In Stock |
| ERT-16-0042 | HMI Panel Glass Overlay Exor UniOP Repair | Available Now |
| ERT-16-0045 | Exor UniOP Front Overlay Touch Panel Glass | In Stock |
| ERT-16-2945 | UniOP Touch Screen Protective Film Repair Kit | Available Now |
| ETT-VGA-0045 | UniOP Touch Digitizer Protective Film Replacement | In Stock |
| ETT-VGA-6545 | HMI Panel Glass Overlay Replacement Repair | Available Now |
| TECT-VGA-0345 | Exor UniOP HMI Panel Glass Front Overlay | In Stock |
| Exor UniOP HMI | Description | Inventory status |
Exor UniOP HMI Manuals PDF Download:
FAQ:
Question: What are the ETT-VGA-6545 Touch Panel Protective Film HMI installation procedures?
Answer: Place the four fixing brackets on the longer side near the corners, as shown in figure . Screw each fixing screw until the plastic or aluminium bezel corner get in contact with the panel.
Question: How to cleaning ETT-VGA-6545 IHM faceplates?
Answer: The equipment must be cleaned only with a soft cloth and neutral soap product. Do not use solvents.
Common misspellings:
ETT-VGA-655ET-VGA-6545
ETT-VGA-6455
ET7-VGA-6545
ETT-VGAA-6545
