Exor UniOP eTOP EK-41 6ZA925-7 Terminal Keypad Repair
Exor UniOP eTOP EK-41 6ZA925-7 Terminal Keypad Repair
Exor UniOP eTOP EK-41 6ZA925-7 Terminal Keypad Repair
Exor UniOP eTOP EK-41 6ZA925-7 Terminal Keypad Repair
Model
EK-41 6ZA925-7

Item specifics

Brand
UniOP
Warranty
365 Days
Product Line
UniOP series
Supply
EK-41 6ZA925-7 Keypad Membrane Replacement
Model
EK-41 6ZA925-7

Review

Description

UniOP eTOP series HMI EK-41 6ZA925-7 Membrane Keypad Keyboard Repair


UniOP series HMI EK-41 6ZA925-7 Membrane Keypad Repair Kit

EK-41 6ZA925-7 Terminal Keypad Highlights
• Shows up to 2 or 4 rows, 20 characters of information
• Choice of Vacuum Fluorescent or Monochrome LCD
• 5 user programmable function EK-41 6ZA925-7 keys with slide-in legends
• 5 user programmable LED EK-41 6ZA925-7 indicators
• Multilanguage project capability
• Connection to industrial bus systems and Ethernet with optional modules
• IP65 front panel protection
• Version with extended operating temperature available


The EK-41 6ZA925-7 Keyboard Membrane product is compatible with all standard TCM and SCM modules. To access the slot for the modules, remove the rear cover of the EK-41 6ZA925-7 Membrane Keypad Keyboard product. The backup battery is accessible for replacement after removing the main module of the unit. The standard programming cable CA114 can be used with EK-41 6ZA925-7 Terminal Keypad units; the same cable can be used with CP05 models if a 15-pin female-female gender changer is applied to the PLC Port.





Specifications:

The table below describes the parameters of the EK-41 6ZA925-7 UniOP Keyboard Membrane.

Part Number: EK-41 6ZA925-7
Backlight: LED
Function Keys: 5
System Keys: 19
Warranty: 365 Days
Input Power: 24VDC (+10%, -15%)
Operating Temperature: 0 to 50 °C
Storage Temperature: -20 to +70 °C
User Memory: 512 KB
Product Line: UniOP series


Related UniOP Series Part No. :

UniOP eTOP Description Inventory status
ECT-VGA-0045 Exor UniOP Touch Screen Monitor Overlay Repair In Stock
EK-41 6ZA925-7 Membrane Keyboard Keypad UniOP Replacement Available Now
EK-42 6ZA987-7 UniOP Membrane Keypad Switch Repair Part In Stock
EL-25T-0042 Exor UniOP Touch Screen Panel Protective Film In Stock
ER-25T-0045 UniOP HMI Touch Screen Front Overlay Replacement In Stock
ERT-16-0042 HMI Panel Glass Overlay Exor UniOP Repair Available Now
ERT-16-0045 Exor UniOP Front Overlay Touch Panel Glass In Stock
ERT-16-2945 UniOP Touch Screen Protective Film Repair Kit Available Now
ETT-VGA-0045 UniOP Touch Digitizer Protective Film Replacement In Stock
ETT-VGA-6545 HMI Panel Glass Overlay Replacement Repair Available Now
TECT-VGA-0345 Exor UniOP HMI Panel Glass Front Overlay In Stock
Exor UniOP HMI Description Inventory status


Exor UniOP HMI Manuals PDF Download:

  • UniOP CP02F-02, CP02R-04 PDF
  • UniOP CP05R-04 User Manuals
  • UniOP CP10G-04 User Manuals
  • UniOP CP10G-04-0045 Manuals
  • UniOP CP12G-04, CP13G-04 PDF

  • FAQ:

    Question: How to cleaning EK-41 6ZA925-7 IHM faceplates?

    Answer: The equipment must be cleaned only with a soft cloth and neutral soap product. Do not use solvents.


    Question: In the case it might be impossible to switch the operator panel to Configuration Modedue to problems in the start-up phase, what should we do?

    Answer: To replace the battery follow the procedure listed below:

  • 1. Switch off the unit
  • 2. Press and hold any 3 keys
  • 3. Turn on the unit and hold the keys pressed until Configuration Mode will be shown on the screen.
  • For keyless models such as the ECT-16, ELT-16, ERT-16, follow the procedure below:
  • 1. Switch off the unit
  • 2. Touch in the middle of the left side of the display screen with the left hand
  • 3. Switch on the operator panel and tap with the right hand in the middle of the right side of the display screen with a period of about one second.
  • 4. Continue until the screen will show Configuration Mode

  • Common misspellings: 

    K-41 6ZA925-7
    EK-41 6ZA95-7
    EK-14 6ZA925-7
    EK-4l 6ZA925-7
    EKK-41 6ZA925-7