UniOP TECT-VGA-0345 HMI Touch Screen Front Overlay

Model: TECT-VGA-0345 DTFP#95633C

Item specifics

Brand: UniOP

Warranty: 365 Days

Supply: TECT-VGA-0345 Protective Film Touch Screen Repair

Model: TECT-VGA-0345 DTFP#95633C

Size: 10.4 inch

Review

Description

UniOP TECT-VGA-0345 DTFP#95633C Touch Screen Panel Front Overlay Repair

UniOP TECT-VGA-0345 DTFP#95633C Touchscreen Front Overlay Repair Kit

TECT-VGA-0345 DTFP#95633C Touch Screen Protective Film IHM Highlights
 30 Line x 80 Character Color LCD
 TFT Active Matrix or Passive Color STN
 VGA Resolution
 Analog TECT-VGA-0345 DTFP#95633C Touchscreen with 30 x 80 Matrix
 Recipe Capabilities
 UniNET Networking Capabilities
 User-definable Characters
 Links Directly to PLC Programming Port
 NEMA 4/12 Compliant Enclosure

The TECT-VGA-0345 DTFP#95633C Touch Screen Glass Front Overlay HMI fulfill the need for a powerful yet cost effective operator interface system. The TECT-VGA-0345 DTFP#95633C display screens are a pixel based 16 color LCD with VGA resolution, either in TFT active matrix or passive color STN. These pixel addressable displays allow graphic capabilities with our Designer for Windows software package. Each line can contain up to 80 characters. Each page can contain up to 30 lines. Brightness control is provided to adjust the display for easy viewing under nearly any condition.

Contact Best Price

Specifications:

The table below describes the parameters of the TECT-VGA-0345 DTFP#95633C UniOP Touchscreen Overlay.

Part Number:	TECT-VGA-0345
Display Type:	TFT LCD
Resolution:	640x480 pixel
Backlight:	CCFL
Warranty:	365 Days

Input Power:	24VDC (+10%, -15%)
Operating Temperature:	0 to 45 °C
Display Size:	10.4 in
Touch screen:	Resistive

Related UniOP Series Part No. :

UniOP eTOP	Description	Inventory status
ECT-VGA-0045	Exor UniOP Touch Screen Monitor Overlay Repair	In Stock
EK-41 6ZA925-7	Membrane Keyboard Keypad UniOP Replacement	Available Now
EK-42 6ZA987-7	UniOP Membrane Keypad Switch Repair Part	In Stock
EL-25T-0042	Exor UniOP Touch Screen Panel Protective Film	In Stock
ER-25T-0045	UniOP HMI Touch Screen Front Overlay Replacement	In Stock
ERT-16-0042	HMI Panel Glass Overlay Exor UniOP Repair	Available Now
ERT-16-0045	Exor UniOP Front Overlay Touch Panel Glass	In Stock
ERT-16-2945	UniOP Touch Screen Protective Film Repair Kit	Available Now
ETT-VGA-0045	UniOP Touch Digitizer Protective Film Replacement	In Stock
ETT-VGA-6545	HMI Panel Glass Overlay Replacement Repair	Available Now
TECT-VGA-0345	Exor UniOP HMI Panel Glass Front Overlay	In Stock
Exor UniOP HMI	Description	Inventory status

Exor UniOP HMI Manuals PDF Download:

UniOP ETT-VGA User Manual

UniOP User's Manual

UniOP Universal Operator Panels Installation Guide

UniOP Touch & Controls PDF

UniOP Manual

UniOP Installation Guide

FAQ:

Question: How to cleaning TECT-VGA-0345 DTFP#95633C Touch Panel Glass Overlay IHM faceplates?

Answer: The equipment must be cleaned only with a soft cloth and neutral soap product. Do not use solvents.

Question: What is Exor UniOP TECT-VGA-0345 DTFP#95633C Touchscreen Calibration?

Answer:

Standard calibration:

1. Recall Configuration Mode

2. Touch the CLEAR key on the TECT-VGA-0345 DTFP#95633C screen until a small round symbol will appear on the top right corner of the screen

3. touch and hold the symbol until it will move to the low left corner of the TECT-VGA-0345 DTFP#95633C screen

4. touch and hold the symbol until the indication to touch the ← key will be displayed on the screen

5. touch and hold the key ← until the indication to touch the ↓ key will be displayed on the screen

6. touch and hold the key ↓ until the indication to touch the Enter key will be displayed on the screen

7. touch and hold the Enter key until the panel will switch to Operation Mode (if a valid project is loaded in the memory)

Emergency calibration.

The Emergency calibration procedure should be used in all cases when it would result not possible to go to calibration using the standard procedure.

1. Switch of the unit

2. turn on the unit

3. tap in the middle of the touchscreen with a frequency of about one second until the operator panel will enter the Calibration Mode

4. perform the standard calibration procedure.

Common misspellings:

TECT-VA-0345
ECT-VGA-0345
TECT-VGA-3450
TEC7-VGA-0345
TECT-VGA--0345