GFX-1260 12.1 Touch Digitizer Glass LCD Display Panel
- Model
- GFX-1260 12.1
Item specifics
- Brand
- Trimble
- Warranty
- 365 Days
- Product Line
- Trimble series
- Supply
- Trimble GFX-1260 12.1 Touch Panel LCD Display
- Size
- 12.1 inch
- Model
- Trimble GFX-1260 12.1
Review
Description
Trimble GFX-1260 12.1 Touch Screen Tablet LCD Display Panel Replacement
Order each part separately is available
The Trimble® GFX-1260 12.1 is an in-cab touchscreen display that provides affordable guidance, steering and precision agriculture functionality. The Trimble GFX-1260 12.1 LCD Screen Touch screen panel glass includes a built-in GPS receiver that you can upgrade to receive GLONASS satellite signals. The Trimble GFX-1260 12.1 Touch Panel LCD Display Screen is used in agricultural applications to maximize efficiency in activities such as planting, spraying, spreading and strip tilling.
VICPAS supplies Trimble GFX-1260 12.1 Trimble Touchscreen glass and LCD Display Panel with 365 Days warranty and support Urgent Worldwide Shipping.
Specifications:
The table below describes the parameters of the Trimble GFX-1260 12.1 HMI Panel Glass.
| Part Number: | GFX-1260 12.1 |
| Screen diagonal: | 12.1 inch |
| Warranty: | 365 Days |
| Product Line: | Trimble Series |
| Input Power: | +24 VDC +/-20% |
| Resolution: | |
| Storage Temperature: | -20°C to 60°C |
| Display Size: | STN |
Related Trimble Series Part No. :
| Trimble HMI | Description | Inventory status |
| GFX-1060 | Trimble Touch Screen Glass LCD Display Replacement | In Stock |
| CASE IH AFS PRO 1200 Display | Trimble Touch Panel Glass Replacement Repair | Available Now |
| GFX-1260 12.1 | Trimble Touch Screen Panel Repair Replacement | In Stock |
| GFX-750 | Trimble LCD Display Panel Touch Screen Monitor Replacement | Available Now |
| XCN-1050 121000 | Trimble LCD Screen Touch Digitizer Repair | In Stock |
| XCN-1060 134000 | Trimble HMI Touch Screen Organizer LCD Display Screen Replacement | In Stock |
| XCN-1260 137000 12.1 | Trimble Touch Panel Glass Replacement | In Stock |
| XCN-750 124000 | Trimble LCD Display Panel Touch Screen Panel Repair Replacement | Available Now |
| Trimble HMI | Description | Inventory status |
Trimble Series HMI Manuals PDF Download:
FAQ:
Question: What are the specific steps to calibrate the Trimble GFX-1260 12.1?
Answer: To calibrate the Trimble GFX-1260 display, follow these specific steps:
Pre-Calibrating Steps
1. Setup Vehicle Profile:
- Ensure that the vehicle profile is completely set up in the Precision-IQ application.
2. Warm Up:
- Allow the vehicle to warm up to ensure all systems are functioning correctly.
Calibration Process
3. Access Calibration Menu:
- From the home screen of the GFX-1260, navigate to the "Settings" menu and select "Calibration."
4. Calibrate Guidance Settings:
- Select "Guidance" and follow the prompts to calibrate steering settings. This typically involves driving in a straight line and then turning to establish reference points for guidance.
5. Implement Calibration:
- If using an implement, go to the "Implement" screen.
- Select the implement you want to calibrate and tap on "Calibrate."
- Follow on-screen instructions to enter parameters such as application rate, speed, and meter revolutions.
6. Spinner Speed Calibration (if applicable):
- Navigate to the spinner speed control settings.
- Enter target values for spinner speed and follow prompts to complete calibration.
7. Save Calibration Settings:
- Once satisfied with the calibration results, save your settings by tapping the green check mark.
8. Final Checks:
- Review all calibrated settings to ensure they align with operational requirements.
Post-Calibration
9. Test Run:
- Conduct a test run in the field to verify that all calibrated settings are functioning correctly during operation.
10. Adjust as Necessary:
- If any discrepancies are observed during the test run, return to the calibration menu and make necessary adjustments.
For detailed guidance, refer to the [Precision-IQ User Guide] or consult an authorized Trimble dealer for assistance.
