6AG1334-0KE00-2AB0 S7 300 Plastic Case Cover Replacement
6AG1334-0KE00-2AB0 S7 300 Plastic Case Cover Replacement
6AG1334-0KE00-2AB0 S7 300 Plastic Case Cover Replacement
6AG1334-0KE00-2AB0 S7 300 Plastic Case Cover Replacement
6AG1334-0KE00-2AB0 S7 300 Plastic Case Cover Replacement
6AG1334-0KE00-2AB0 S7 300 Plastic Case Cover Replacement
Model
6AG1334-0KE00-2AB0

Item specifics

Brand
Siemens
Warranty
365 Days
Product Line
Siemens SIMATIC S7-300 Plastic Housing
Supply
Siemens SIMATIC SM 334 Enclosure
Siemens S7-300
6AG1334-0KE00-2AB0
Model
6AG1 334-0KE00-2AB0
Number
6AG13340KE002AB0

Review

Description

6AG1334-0KE00-2AB0 Siemens SIMATIC S7-300 Module Housing Repair Replacement


6AG1334-0KE00-2AB0 Siemens SIMATIC S7-300 SM 334 Plastic Shell Repair Replacement

Digital output module SM 334; DO 16 x UC 24/48 V; (6AG1334-0KE00-2AB0 Enclosure) Properties
Performance features of the SM 334; DO 16 x UC24/48 V digital output module:
● 16 electrically isolated semiconductor relay outputs
● Electrical isolation between channels of 120 V
● Switching characteristics: RDS ON is typically 0.25 Ohm, and RDS OFF is typically greater than 100 GOhm
● Designed for load voltages up to 48 V AC or DC, no minimum load voltage
● Designed for output loads up to 0.5 A, no minimum load current
● Outputs are fully independent and support any wiring configuration
● Set substitution values or "Hold last values" can be programmed at the outputs for CPU STOP.
● The module supports diagnostics of programming errors and of external power failure
● Suitable for AC solenoids, actuators, motor starters, FHP motors and signal lamps
● Supports parameter reassignment in RUN


S7-300 6AG13340KE002AB0 SM 334 HMI Case systems are intended for stationary use in locations protected against the weather. The operating conditions surpass the requirements of DIN IEC 60721-3-3.
 Class 3M3 (mechanical requirements)
 Class 3K3 (climatic requirements)


VICPAS supply 6AG1 334-0KE00-2AB0 Siemens S7 300 Simatic Module Plastic Case Cover Replacement Part. All of them with VICPAS 365 days warranty and support Urgent Worldwide Shipping.





Specifications:

The table below describes the parameters of the 6AG1334-0KE00-2AB0 Siemens SIMATIC SM 334 Case Parts.

Part Number: 6AG1334-0KE00-2AB0
Atmospheric pressure: 1080 to 660 hPa
Temperature: –40 °C to +70°C
Warranty: 365 days Warranty
Product Line: Siemens Simatic S7-300
Dimensions W x H x D (mm): 40 x 120.4 x 110.8
Safety isolation: SELV circuit
Power consumption: 57 W
Power loss: Typ. 9 W
Efficiency: 84 %


Related Siemens Simatic S7-300 Part No. :

Siemens Simatic S7 300 Description Inventory status
6AG1322-1CF00-2AA0 Siemens SIPLUS S7-300 SM 322 Plastic Case SM 321 Replacement Available Now
6AG1322-1FF01-2AA0 SIMATIC SIPLUS S7-300 SM 322 Plastic Shell Repair Part In Stock
6AG1334-0KE00-2AB0 Siemens SIPLUS S7-300 SM 334 Housing Enclosure Repair Available Now
6AG1334-0KE00-7AB0 Siemens SIPLUS S7-300 SM 334 Plastic Shell Replacement In Stock
6ES7153-2AA02-0XB0 Siemens S7-300 IM 153-2 Plastic Case Replacement In Stock
6ES7321-7EH00-0AB0 S7-300 SM 321 Digital Input Modules Enclosure Replace In Stock
6ES7321-7KF02-0AB0 SM 321 Digital Input Modules Plastic Case Replacement Available Now
6ES7322-8BH10-0AB0 S7-300 SM 322 Digital Output Modules Housing Repair Available Now
6ES7331-7HF00-0AB0 S7-300 SM 331 Analog Input Modules Plastic Shell Repair In Stock
6ES7331-7KF01-0AB0 SIMATIC S7-300 ANALOG INPUT SM 331 HMI Case Replacement Available Now
PLC Siemens S7 300 Description Inventory status

Siemens SIMATIC S7-300 HMI Manuals PDF Download:

  • 6ES73221FL000AA0 Datasheet
  • 6ES73221HF010AA0 Datasheet
  • 6ES73221HH010AA0 Datasheet
  • SIEMENS SIMATIC S7-300 Getting Started for First Time Users
  • SIEMENS SIMATIC S7-300 Module Data Equipment Manual 2022
  • SIEMENS SIMATIC S7-300 Module Data Manual 2013
  • SIEMENS SIMATIC S7-300 Module Data Manual 2017
  • SIEMENS SIMATIC S7-300 Programmable Controller Hardware and Installation Manual
  • SIEMENS SIMATIC S7-300 Programmable Controller Module Specifications Reference Manual
  • SIEMENS SIMATIC S7-300

  • FAQ:

    Question: When should I use expansion devices?

    Answer: You can use EDs if the number of CU slots is insufficient for your application.
    When using EDs, you might require further power supply modules in addition to the extra module racks and interface modules (IM). When using interface modules, you must ensure compatibility of the partner stations.


    Question: In which situations should I backup the operating system?

    Answer: For example, you should backup the operating system of your system CPU if you want to replace it with a standby CPU and ensure that the operating system is identical in the replacement CPU.
    It is also highly recommended to generate a backup copy of the operating system for emergency situations.


    Question: What is the 6AG1334-0KE00-2AB0 Siemens Simatic S7-300 Module Housing parts price?

    Answer: Submit a fast quote, send VICPAS an email for best price.


    Common misspellings: 

    6AG1334-0KE00-AB0
    AG1334-0KE00-2AB0
    6AG1334-0EK00-2AB0
    6AG1334-0KE00-2A80
    6AG11334-0KE00-2AB0