S7 300 6ES7331-7HF00-0AB0 HMI Case Replacement
- Model
- 6ES7331-7HF00-0AB0
Item specifics
- Brand
- Siemens
- Warranty
- 365 Days
- Product Line
- Siemens SIMATIC S7-300 Plastic Housing
- Supply
- Siemens SIMATIC S7 300 SM 331 analog input modules
- Siemens S7-300
- 6ES7331-7HF00-0AB0
- Model
- 6ES7 331-7HF00-0AB0
- Number
- 6ES73317HF000AB0
Review
Description
6ES7331-7HF00-0AB0 Siemens SIMATIC S7-300 Module Housing Repair Replacement
S7-300 6ES73317HF000AB0 SM 331 analog input modules HMI Case systems are intended for stationary use in locations protected against the weather. The operating conditions surpass the requirements of DIN IEC 60721-3-3.
Class 3M3 (mechanical requirements)
Class 3K3 (climatic requirements)
Analog input module SM 331; AI 8 x 13 Bit; (6ES7 331-7HF00-0AB0 Plastic Shell) Properties
• 8 inputs in 8 channel groups
• Programmable resolution for each group (12 bits + sign)
• Measurement type programmable for each channel group:
– Voltage
– Current
– Resistance
– Temperature
• Any measuring range per channel
• Motor protection/temperature monitoring with PTC in accordance with IEC 60034-11-2 type A
• Temperatures recorded via KTY83/110, KTY84/130 silicon temperature sensors
VICPAS supply 6ES7331-7HF00-0AB0 Siemens S7 300 Simatic Module Plastic Case Cover Replacement Part. All of them with VICPAS 365 days warranty and support Urgent Worldwide Shipping.
Specifications:
The table below describes the parameters of the 6ES7331-7HF00-0AB0 Siemens SIMATIC SM 331 analog input modules Case Parts.
| Part Number: | 6ES7331-7HF00-0AB0 |
| Atmospheric pressure: | 1080 to 660 hPa |
| Temperature: | –40 °C to +70°C |
| Warranty: | 365 days Warranty |
| Product Line: | Siemens Simatic S7-300 |
| Dimensions W x H x D (mm): | 40 x 120.4 x 110.8 |
| Safety isolation: | SELV circuit |
| Power consumption: | 57 W |
| Power loss: | Typ. 9 W |
| Efficiency: | 84 % |
Related Siemens Simatic S7-300 Part No. :
| Siemens Simatic S7 300 | Description | Inventory status |
| 6AG1322-1CF00-2AA0 | Siemens SIPLUS S7-300 SM 322 Plastic Case SM 321 Replacement | Available Now |
| 6AG1322-1FF01-2AA0 | SIMATIC SIPLUS S7-300 SM 322 Plastic Shell Repair Part | In Stock |
| 6AG1334-0KE00-2AB0 | Siemens SIPLUS S7-300 SM 334 Housing Enclosure Repair | Available Now |
| 6AG1334-0KE00-7AB0 | Siemens SIPLUS S7-300 SM 334 Plastic Shell Replacement | In Stock |
| 6ES7153-2AA02-0XB0 | Siemens S7-300 IM 153-2 Plastic Case Replacement | In Stock |
| 6ES7321-7EH00-0AB0 | S7-300 SM 321 Digital Input Modules Enclosure Replace | In Stock |
| 6ES7321-7KF02-0AB0 | SM 321 Digital Input Modules Plastic Case Replacement | Available Now |
| 6ES7322-8BH10-0AB0 | S7-300 SM 322 Digital Output Modules Housing Repair | Available Now |
| 6ES7331-7HF00-0AB0 | S7-300 SM 331 Analog Input Modules Plastic Shell Repair | In Stock |
| 6ES7331-7KF01-0AB0 | SIMATIC S7-300 ANALOG INPUT SM 331 HMI Case Replacement | Available Now |
| PLC Siemens S7 300 | Description | Inventory status |
Siemens SIMATIC S7-300 HMI Manuals PDF Download:
FAQ:
Question: Putting a New 6ES7331-7HF00-0AB0 Plastic Case Cover Body Module into Service
Answer: Proceed as follows to put the new module into service:
1. Open the front panel.
2. Reinstall the front connector.
3. Close the front panel.
4. Switch the load voltage back on.
5. Set the CPU to RUN mode again.
Question: When should I use expansion devices?
Answer: You can use EDs if the number of CU slots is insufficient for your application.
When using EDs, you might require further power supply modules in addition to the extra module racks and interface modules (IM). When using interface modules, you must ensure compatibility of the partner stations.
Common misspellings:
6ES7331-7HF00-AB06S7331-7HF00-0AB0
6ES3731-7HF00-0AB0
6ES7331-THF00-0AB0
6ES7331-7HF00-00AB0
