SIEMENS SIMATIC S7-300 6AG1195-7KF00-2XA0 Housing

If your S7-300 modules 6AG1195-7KF00-2XA0 Enclosure are exposed to severe shock and/or vibrations, you must take the appropriate measures to reduce the acceleration and/or amplitude, respectively. We recommend that you install the S7-300 6AG1195-7KF00-2XA0 HMI Case on vibration-damping materials (for example, rubber-metal antivibration mountings).

SIPLUS S7-300 safety protector based on 6AG1195-7KF00-2XA0 Plastic Shell with conformal coating, -25…+60 °C, safety protector between F and standard 6AG1195-7KF00-2XA0 Housing modules with redundant ET 200M connections, only use with isolating bus module.

The S7-300 6AG1195-7KF00-2XA0, for example, must not be used without taking additional measures:
 in locations exposed to a high degree of ionizing radiation
 in hostile environments caused, for instance, by
– dust accumulation
– corrosive vapors or gases
– strong electric or magnetic fields
 in installations requiring special monitoring, for example
– elevators
– electrical installations in particularly hazardous areas
An additional measure might be, for instance, installation of the S7-300 in a cabinet or in a housing.