S7 300 6AG1322-1CF00-2AA0 HMI Case Replacement
- Model
- 6AG1322-1CF00-2AA0
Item specifics
- Brand
- Siemens
- Warranty
- 365 Days
- Product Line
- Siemens SIMATIC S7-300 Plastic Housing
- Supply
- Siemens SIMATIC S7 300 SM 322 digital outputmodule
- Siemens S7-300
- 6AG1322-1CF00-2AA0
- Model
- 6AG1 322-1CF00-2AA0
- Number
- 6AG13221CF002AA0
Review
Description
6AG1322-1CF00-2AA0 Siemens SIMATIC S7-300 Module Housing Repair Replacement
S7-300 6AG13221CF002AA0 SM 322 digital output modules HMI Case systems are intended for stationary use in locations protected against the weather. The operating conditions surpass the requirements of DIN IEC 60721-3-3.
Class 3M3 (mechanical requirements)
Class 3K3 (climatic requirements)
Programmable digital IO module SM 322; DI 8/DO 8 x DC 24 V/0.5 A (6AG1322-1CF00-2AA0 Plastic Shell) Properties
Properties of SM 322; DI 8/DO 8 x DC 24 V/0.5 A:
• 8 digital inputs and 8 individually configurable inputs or outputs, isolated in groups of 16
• Rated input voltage 24 V DC
• Inputs suitable for switches and 2-/3-/4-wire proximity switches (BEROs)
• Output current 0.5 A
• Rated load voltage 24 V DC
• Outputs capable of driving solenoid valves, DC contactors and indicator lights
• Dynamic change of parameters in RUN (CiR-compatible), separately at each channel.
• Readback of outputs.
VICPAS supply 6AG1322-1CF00-2AA0 Siemens S7 300 Simatic Module Plastic Case Cover Replacement Part. All of them with VICPAS 365 days warranty and support Urgent Worldwide Shipping.
Specifications:
The table below describes the parameters of the 6AG1322-1CF00-2AA0 Siemens SIMATIC SM 322 digital output modules Case Parts.
| Part Number: | 6AG1322-1CF00-2AA0 |
| Atmospheric pressure: | 1080 to 660 hPa |
| Temperature: | –40 °C to +70°C |
| Warranty: | 365 days Warranty |
| Product Line: | Siemens Simatic S7-300 |
| Dimensions W x H x D (mm): | 40 x 120.4 x 110.8 |
| Safety isolation: | SELV circuit |
| Power consumption: | 57 W |
| Power loss: | Typ. 9 W |
| Efficiency: | 84 % |
Related Siemens Simatic S7-300 Part No. :
| Siemens Simatic S7 300 | Description | Inventory status |
| 6AG1322-1CF00-2AA0 | Siemens SIPLUS S7-300 SM 322 Plastic Case SM 321 Replacement | Available Now |
| 6AG1322-1FF01-2AA0 | SIMATIC SIPLUS S7-300 SM 322 Plastic Shell Repair Part | In Stock |
| 6AG1334-0KE00-2AB0 | Siemens SIPLUS S7-300 SM 334 Housing Enclosure Repair | Available Now |
| 6AG1334-0KE00-7AB0 | Siemens SIPLUS S7-300 SM 334 Plastic Shell Replacement | In Stock |
| 6ES7153-2AA02-0XB0 | Siemens S7-300 IM 153-2 Plastic Case Replacement | In Stock |
| 6ES7321-7EH00-0AB0 | S7-300 SM 321 Digital Input Modules Enclosure Replace | In Stock |
| 6ES7321-7KF02-0AB0 | SM 321 Digital Input Modules Plastic Case Replacement | Available Now |
| 6ES7322-8BH10-0AB0 | S7-300 SM 322 Digital Output Modules Housing Repair | Available Now |
| 6ES7331-7HF00-0AB0 | S7-300 SM 331 Analog Input Modules Plastic Shell Repair | In Stock |
| 6ES7331-7KF01-0AB0 | SIMATIC S7-300 ANALOG INPUT SM 331 HMI Case Replacement | Available Now |
| PLC Siemens S7 300 | Description | Inventory status |
Siemens SIMATIC S7-300 HMI Manuals PDF Download:
FAQ:
Question: Putting a New 6AG1322-1CF00-2AA0 Plastic Case Cover Body Module into Service
Answer: Proceed as follows to put the new module into service:
1. Open the front panel.
2. Reinstall the front connector.
3. Close the front panel.
4. Switch the load voltage back on.
5. Set the CPU to RUN mode again.
Question: When should I use expansion devices?
Answer: You can use EDs if the number of CU slots is insufficient for your application.
When using EDs, you might require further power supply modules in addition to the extra module racks and interface modules (IM). When using interface modules, you must ensure compatibility of the partner stations.
Common misspellings:
6AG1322-1CF0-2AA0AG1322-1CF00-2AA0
6AG132-21CF00-2AA0
6AG1322-ICF00-2AA0
6AG1322-1CF000-2AA0
