IDEC HG4G-CJT22MF-B Touch Screen Protective Film Repair

Order each part separately is available

Screen Types of IDEC HG4G-CJT22MF-B Touch Panel Front Overlay

1. Base Screen: The screen that is displayed when the Touch is in Run Mode. Drawing objects and functional parts can be created mainly on this screen which is displayed on the HG4G-CJT22MF-B Front Overlay Touchscreen.
2. Popup Screen: The Popup Screen that is displayed on the Base Screen when the HG4G-CJT22MF-B Protective Film Touch Screen Monitor is in Run Mode. The size and coordinates of the screen can be specified and this screen can also be moved on the Base Screen.
3. Library Screen: The screen that registers often used drawing objects and parts to the set WindO/I-NV3. References the registered screen while the project is being edited and can copy and appropriate drawing objects and parts from the screen.
4. Maintenance Screen: Using the screen that is displayed when the IDEC HG4G-CJT22MF-B Protective Film Touch Membrane is in Run Mode, you can switch from Run Mode to System Mode and load a screen to adjust Device Monitor and screen brightness.

Features for the HG4G-CJT22MF-B Touch Screen Glass Front Overlay

The Touch is high-performance programmable controller in a compact package and is equipped with high speed counters. The Touch enables you to build optimum systems to automate factories or control production lines.
The HG4G-CJT22MF-B Overlay Film Touch Panel is equipped with an LCD and the same display functions as the MICRO/I. You can monitor and modify values of devices and monitor basic instructions. Also, by creating screens and programming control functions, you can display the current time, bar charts, scrolling messages, or simple text on the LCD screen.