IDEC HG3G-8JT22MF-B Overlay Film Touch Membrane Repair
IDEC HG3G-8JT22MF-B Overlay Film Touch Membrane Repair
IDEC HG3G-8JT22MF-B Overlay Film Touch Membrane Repair
IDEC HG3G-8JT22MF-B Overlay Film Touch Membrane Repair
IDEC HG3G-8JT22MF-B Overlay Film Touch Membrane Repair
IDEC HG3G-8JT22MF-B Overlay Film Touch Membrane Repair
Model
HG3G-8JT22MF-B

Item specifics

Warranty
365 Days
Shipping
2-4 workdays
Brand
IDEC
Supply Parts
Protective Film Touch Screen Glass
Display Size
8.4 inches

Review

Description

IDEC High Performance Series HG3G-8JT22MF-B HMI Touch Glass Protective Film Replacement

Order each part separately is available

IDEC High Performance Series HG3G-8JT22MF-B Touch Panel Front Overlay for repair replacement

Maintenance and Inspection of HG3G-8JT22MF-B Protective Film Touch Screen Display

Maintain and inspect the IDEC HG3G-8JT22MF-B Touch Digitizer Glass Overlay Film periodically to ensure the best performance. Do not disassemble, repair, or modify the High Performance Series HG3G-8JT22MF-B Protective Film MMI Touch Glass during inspection. Wipe any stain off the display using a soft cloth slightly dampened with neutral detergent or alcoholic solvent. Do not use solvents such as thinner, ammonia, strong acid, and strong alkaline. Check the terminals and connectors to make sure of no loose screws, incomplete insertion or disconnected lines. Make sure that all mounting clips and screws are tightened sufficiently.If the mounting clips are loose, tighten the screw to the recommended tightening torque.


Adjusting the HG3G-8JT22MF-B Touch Panel Front Overlay

A gap may be caused in the operation accuracy of the touch panel by the secular distortion, etc. Readjust the touch panel when there is a gap in the operation of the touch panel.


Panel Cut-out Dimensions of HG3G-8JT22MF-B Touchscreen Front Overlay

Place the IDEC Terminal in a panel cut-out and fasten with the attached mounting clips. Do not tighten excessively, otherwise the HG3G-8JT22MF-B Overlay Film Touch Membrane may warp and cause wrinkle on the display, or impair the waterproof characteristics.


Note for operation

The screen becomes blank when the backlight is burnt out; however, the HG3G-8JT22MF-B Touch Panel Protective Film remains enabled. Incorrect touch panel operation will occur when operating the touch panel when the backlight appears to be turned off but is actually burnt out. Note that this erroneous operation may result in damage.





Specifications:

The table below describes the parameters of the IDEC High Performance Series HG3G-8JT22MF-B Touch Screen Monitor Front Overlay HMI.

Corrosion Immunity: Free from corrosive gases
Operating Humidity: 10 to 90% RH
Product Line: High Performance Series
Storage Temperature: -20 ~ 70°C
Operating Temperature: -20 ~ 60°C
Brand: IDEC
Model Number: HG3G-8JT22MF-B
Warranty: 1-Year Warranty
Display Type: TFT Color
Display Size: 8.4"


Related IDEC HMI No. :

IDEC HMI Description Inventory status
HG2G-V5FT22TF-B IDEC High Performance Series Touch Screen Panel Front Overlay Replacement In Stock
HG2G-V5FT22TF-W IDEC High Performance Series Protective Film Touch Digitizer Glass Repair Available Now
HG3G-8JT22MF-W IDEC High Performance Series Touch Screen Glass Protective Film Repair Available Now
HG3G-8JT22TF-B IDEC High Performance Series Touch Screen Display Front Overlay Replacement In Stock
HG3G-8JT22TF-W IDEC High Performance Series Protective Film HMI Panel Screen Repair Available Now
HG3G-V8XT22MF-B IDEC High Performance Series Touchscreen Monitor Front Overlay Replacement In Stock
HG3G-V8XT22MF-W IDEC High Performance Series Touch Screen Film Protective Film Repair Available Now
HG4G-CJT22MF-B IDEC High Performance Series Front Overlay Touch Monitor Replacement In Stock
HG4G-CJT22TF-B IDEC High Performance Series Protective Film Touch Membrane Repair Available Now
HG4G-VCXT22MF-B IDEC High Performance Series Touch Screen Tablet Front Overlay Replacement In Stock
IDEC HMI Description Inventory status

IDEC High Performance Series Manuals PDF Download:

  • IDEC-HMI-Selection-Guide
  • IDEC-Data-File-Manager-Users-Manual

  • FAQ:

    Question: How do I calibrate the touch screen on the HG3G-8JT22MF-B HMI?

    Answer: To calibrate the touch panel of HG3G-8JT22MF-B, go to the calibration settings in the HMI menu. Follow the on-screen instructions to touch specific calibration points accurately. This process ensures accurate touch input across the screen.


    Question: How to install HG3G-8JT22MF-B Terminal?

    Answer:
    How to install HG3G-8JT22MF-B Terminal?

    Common misspellings: 

    G3G-8JT22MF-B

    HG3G8JT22MF-B

    HG3G-8JT22M-B

    HG3G-8JT22MF-

    HG3G-8TJ22MF-B