M2I Premium/Standard/ATEX TOPRP10D Overlay HMI Touch
- Model
- M2I TOPRP10D
Item specifics
- Brand
- M2I
- Warranty
- 365 Days
- Product Line
- M2I Premium/Standard/ATEX Model
- Supply
- TOPRP10D Touch Screen Film Front Overlay
- Shipping
- 2-4 workdays
- Part Number
- M2I Premium/Standard/ATEX Model TOPRP10D
Review
Description
M2I Premium/Standard/ATEX Model TOPRP10D Protective Film Touch Digitizer Glass Replacement
Order each part separately is available
Fixing
Install clamps with M2I TOPRP10D Touch Screen Monitor Front Overlay product should be installed as follows to maintain the IP performance of the device.
a.Insert the clamp into the slot of the product.
b.Screw the unit into the TOPRP10D Front Overlay Touch Membrane panel cut with a screwdriver. If the screw is over tightened, it may cause the front deformation, thus resulting the touch sensor Can't work properly Tighten the screws to a torque of 0.2 N.m.
Setting System Recovery Mode of TOPRP10D Protective Film Touch Digitizer Glass
a.If the system fails to boot normally due to a problem during operation, the built-in recovery function can be used to maintain the factory default state. Please note that the built-in project will be deleted when using the recovery mode.
b.After opening the TOPRP10D Protective Film Touch Screen Monitor rear cover, you can adjust the setting switch. Keep the "BOOT UP"state when booting normally. If the system is recovering, turn off the power and set it to "RECOVERY".
c.When the recovery of M2I TOPRP10D HMI Panel Glass Front Overlay is completed, the buzzer sounds, then turn off the power and reset to "BOOT UP" state.
Specifications:
The table below describes the parameters of the M2I TOPRP10D Touch Screen Glass Protective Film HMI Parts.
Brand: | M2I |
Part Number: | TOPRP10D |
Warranty: | 365 Days |
Ambient Humidity: | 85% RH or less |
Operation Temperature: | 0°C ~ +50°C |
Storage Temperature: | -10°C ~ +60°C |
Screen Type: | Analog Resistive Film |
Display Type: | TFT Color |
Operating Humidity: | 0 ~ 90% |
Status LED: | Built-in |
Related M2I HMI Part No. :
M2I HMI | Description | Inventory status |
TOPRD1010X | M2I Premium/Standard/ATEX Model Touch Panel Front Overlay Replacement | In Stock |
TOPRD1020X | M2I Premium/Standard/ATEX Model Protective Film HMI Panel Glass Repair | Available Now |
TOPRD1210S | M2I Premium/Standard/ATEX Model Front Overlay Touch Membrane Replacement | In Stock |
TOPRD1220X | M2I Premium/Standard/ATEX Model HMI Touch Glass Protective Film Repair | Available Now |
TOPRD1510X | M2I Premium/Standard/ATEX Model Touch Screen Display Front Overlay Repair | In Stock |
TOPRD1520X | M2I Premium/Standard/ATEX Model Protective Film HMI Panel Screen Repair | Available Now |
TOPRP20D | M2I Premium/Standard/ATEX Model Touch Screen Film Protective Film Repair | Available Now |
TOPRT1210SD-Ex | M2I Premium/Standard/ATEX Model Front Overlay Touch Digitizer Glass Replacement | In Stock |
M2I HMI | Description | Inventory status |
M2I Premium/Standard/ATEX Model HMI Manuals PDF Download:
FAQ:
Question: What are the environment specifications of M2I Premium/Standard/ATEX Model TOPRP10D Front Overlay Touch Screen Display?
Answer:
Question: What are the front part names and specifications of TOPRP10D?
Answer: The front part names and specific cation of M2I C TOP Series TOPRP10D are TFT 16M Color LCD, Analog Touch Panel and Front Cover Sheet for Damp Proof and Dust Proof.
Question: What is the memory specifications of TOPRP10D?
Answer:
Common misspellings:
TOOPRP10DTORPP10D
TOPRP01D
TOPRP1D0
TOPRP0D