M2I X TOP-E Series XTOP05TQ-ED Touch Digitizer Glass
M2I X TOP-E Series XTOP05TQ-ED Touch Digitizer Glass
M2I X TOP-E Series XTOP05TQ-ED Touch Digitizer Glass
M2I X TOP-E Series XTOP05TQ-ED Touch Digitizer Glass
Model
M2I XTOP05TQ-ED

Item specifics

Brand
M2I
Size
5.7 inch
Warranty
365 Days
Product Line
M2I X TOP-E Series
Supply
XTOP05TQ-ED Touch Membrane
Shipping
2-4 workdays
Part Number
M2I X TOP-E Series XTOP05TQ-ED

Review

Description

M2I X TOP-E Series XTOP05TQ-ED Touch Screen Glass Replacement


M2I X TOP-E Series XTOP05TQ-ED Touch Screen Monitor Repair Replacement

Fixing

Install clamps with M2I XTOP05TQ-ED Touch Screen Monitor product should be installed as follows to maintain the IP performance of the device.
a.Insert the clamp into the slot of the product.
b.Screw the unit into the XTOP05TQ-ED Touch Membrane panel cut with a screwdriver. If the screw is over tightened, it may cause the front deformation, thus resulting the touch sensor Can't work properly Tighten the screws to a torque of 0.2 N.m.


Setting System Recovery Mode of XTOP05TQ-ED Touch Digitizer Glass

a.If the system fails to boot normally due to a problem during operation, the built-in recovery function can be used to maintain the factory default state. Please note that the built-in project will be deleted when using the recovery mode.
b.After opening the XTOP05TQ-ED Touch Screen Monitor rear cover, you can adjust the setting switch. Keep the "BOOT UP"state when booting normally. If the system is recovering, turn off the power and set it to "RECOVERY".
c.When the recovery of M2I XTOP05TQ-ED HMI Panel Glass is completed, the buzzer sounds, then turn off the power and reset to "BOOT UP" state.




Specifications:

The table below describes the parameters of the M2I XTOP05TQ-ED Touch Panel HMI Parts.

Warranty: 365 Days
Brand: M2I
Display Type: TFT Color
Display Resolution: 320 x 240 Pixels
Product Line: X TOP-E Series
Display Color: 65536 Color
Operation Temperature: 0°C ~ +50°C
Storage Temperature: -10°C ~ +60°C
Ambient Humidity: 85% RH or less
Part Number: XTOP05TQ-ED


Related M2I HMI Part No. :

M2I HMI Description Inventory status
CTOP2M-A M2I C Top Series Touch Screen Tablet Front Overlay Replacement In Stock
CTOP2M-B M2I C Top Series Protective Film Touch Panel Glass Repair Available Now
CTOP3M M2I C Top Series Front Overlay Touch Membrane Replacement In Stock
XTOP05MQ-ED M2I X Top-E Series HMI Touch Glass Protective Film Repair Available Now
XTOP05MQ-ED-E M2I X Top-E Series Touch Screen Display Front Overlay Replacement In Stock
XTOP05TQ-ED M2I X Top-E Series Protective Film HMI Panel Screen Repair Available Now
XTOP05TQ-ED-E M2I X Top-E Series Touch Digitizer Front Overlay Replacement In Stock
XTOP08TV-ED M2I X Top-E Series Touch Screen Film Protective Film Repair Available Now
XTOP08TV-ED-E M2I X Top-E Series Front Overlay Touch Digitizer Glass Replacement In Stock
XTOP10TV-ED M2I X Top-E Series Protective Film Touch Membrane Repair Available Now
XTOP10TV-ED-E M2I X Top-E Series Touch Screen Tablet Front Overlay Replacement In Stock
M2I HMI Description Inventory status


M2I X TOP-E Series HMI Manuals PDF Download:

  • Strengthen Customer's Industrial Value
  • M2I Corporation Industrial HMI Touch Panel HW Installation Manual
  • TOPPCVIEW Catalog

  • FAQ:

    Question: What is the case material of M2I XTOP05TQ-ED Touch Panel Terminal?

    Answer: The case material is PC(Flameless).


    Question: What is the cooling system of X TOP-E Series XTOP05TQ-ED Touch Membrane Machine?

    Answer: The cooling system of XTOP05TQ-ED is natural air circulation.


    Question: What is M2I X TOP-E Series XTOP05TQ-ED Touch Screen HMI parts price?

    Answer: Submit a fast quote, send VICPAS an email for best price.

    Common misspellings: 

    TOP05TQ-ED
    XTOP05TQED
    XTOP05T-QED
    XTOP05TQE-D
    XTOP05TQ-DE