VT3-V10D Touch Membrane Front Overlay
- Model
- VT3-V10D
Item specifics
- Brand
- Keyence
- Warranty
- 365 Days
- Product Line
- Keyence VT3 Series
- Supply
- Touch Screen Monitor Protective Film
- Shipping
- 2-4 workdays
- Part Number
- VT3-V10D
Review
Description
Keyence VT3 Series VT3-V10D Touch Screen Front Overlay Repair
Measures for improving VT3-V10D noise resistance
• Do not mount the VT3-V10D Touch Panel Front Overlay VT3 inside industrial control panels in which high-voltage devices are also located.
• Mount the VT3 as far away as possible from power lines.
• Mount the VT3-V10D Protective Film HMI Touch Screen VT3 product as far away as possible when it must be mounted next to devices (e.g.solenoids, choppers)that generate strong magnetic and electrical fields.
• Do not include the VT3's I/O leads in the same ducts as power lines and high-voltage lines. Wire the l/O leads in separate ducts. Noise from power lines and high-voltage lines may cause malfunction on the VT3-V10D Touchscreen Front Overlay VT3 product.
• On Protective Film Touch Membrane VT3 models that are provided with a protective earth terminal and shielded lead, provide a D-type grounding (maximum resistance of 100 Ohms).
Specifications:
The table below describes the parameters of the Keyence VT3 Series VT3-V10D Front Overlay Panel Glass HMI Parts.
| Brand: | Keyence |
| Display Version: | TFT color LCD |
| Product Line: | Keyence VT3 Series |
| Resolution: | 640 x 480 pixels |
| Warranty: | 12 Months Warranty |
| Rated voltage: | 24VDC±10% |
| Touchscreen: | Resistive |
| Current consumption: | 1000 mA or less |
| Storage Temperature: | -10 °C ~ +60 °C |
| Touch Size: | 10" |
Related Keyence VT3 Series HMI Part No. :
| Keyence VT3 HMI | Description | Inventory status |
| VT3-Q5HG | Keyence VT3 Series Touch Screen Front Overlay Repair | In Stock |
| VT3-Q5M | Keyence VT3 Series Protective Film Touch Panel Replacement | Available Now |
| VT3-Q5MW | Keyence VT3 Series Touch Digitizer Front Overlay Repair | In Stock |
| VT3-Q5S | Keyence VT3 Series Protective Film HMI Touch Screen Replacement | In Stock |
| VT3-Q5SW | Keyence VT3 Series Front Overlay HMI Panel Glass Repair | Available Now |
| VT3-Q5T | Keyence VT3 Series Touch Membrane Protective Film Replacement | In Stock |
| VT3-Q5TW | Keyence VT3 Series Touchscreen Glass Front Overlay Repair | Available Now |
| VT3-S10 | Keyence VT3 Series Protective Film Touch Panel Replacement | In Stock |
| VT3-S10B | Keyence VT3 Series Front Overlay HMI Touch Glass Repair | Available Now |
| VT3-S12 | Keyence VT3 Series Touch Screen Protective Film Replacement | In Stock |
| VT3-S12D | Keyence VT3 Series Front Overlay Touch Digitizer Repair | In Stock |
| VT3-V7 | Keyence VT3 Series Protective Film Touch Membrane Replacement | In Stock |
| Keyence VT3 Series | Description | Inventory status |
Keyence VT3 Series HMI Manuals PDF Download:
FAQ:
Question: What is the panel thickness of Keyence VT3?
Answer: 
Attention: VT3-V6H(G)/Q5H(G)/V7R cannot be mounted in the panel.
Question: What should I pay attention to when installing the emergency stop switch of Keyence VT3 VT3-V10D?
Answer:
• For the installation and wiring of emergency stop switch, one of the following operations must work: for mechanical equipment that might cause dangerous state, cut off power supply of the actuator immediately(stop category 0), or control power supply of the actuator y(stop category 1), so as to stop the dangerous running as soon as possible.
• When emergency stop switch is pressed, emergency stop must have priority over other functions, and all operating modes.
• The emergency stop switch should be installed and wired such that it will not automatically return (restarted)even if it is reset.
• The emergency stop switch should be set up and wired such that operators have the easiest access to it in case of emergency.
Common misspellings:
VT3V10DVTT3-V10D
VT3-VV10D
VT3-V10DD
VT3-1V0D
