VT3-S12D Protective Film Touch Screen Panel
- Model
- VT3-S12D
Item specifics
- Brand
- Keyence
- Warranty
- 365 Days
- Product Line
- Keyence VT3 Series
- Supply
- Keyence VT3-S12D Touch Panel Front Overlay
- Part Number
- VT3-S12D
- Shipping
- 2-4 workdays
- Display Size
- 10 inches
Review
Description
Keyence VT3-S12D Touch Digitizer Glass Protective Film Repair
Order each part separately is available
Pay attention to the following points when installing the VT3-S12D Touchscreen Protective Film VT3 product inside a control panel.
• When the ambient temperature is higher than 40°C, please use it at a maximum absolute humidity of 85% RH at 40°C.
• Do not install the VT3-S12D Front Overlay Touch Panel VT3 product in a location where the ambient temperature exceeds the 0 to 50°C, or the ambient humidity exceeds the 35 to 85% RH range.
• If the ambient temperature exceeds the above range, install a forced air cooling fan or air conditioner to keep the ambient temperature within this range.
• Allow as much space as possible between the VT3-S12D HMI Panel Glass Protective Film VT3 product and surrounding structures and other components to improve maintainability, operability and ventilation.
• Do not mount the VT3-S12D Touch Digitizer Front Overlay VT3 product directly above equipment (e.g. heaters, transformers, inverters and equipment with large resistance) that generate lots of heat.
• Do not use PORT1 (USB) in locations that are subject to vibration or impact. The USB connector is not provided with a locking function, so the USB cable may become loose or disconnected, and disrupt communications.
Specifications:
The table below describes the parameters of the Keyence VT3 Series VT3-S12D Touch Panel Protective Film HMI Parts.
| Backlight: | LED |
| Display Resolution: | 800 x 600 pixels |
| Display Size: | 12 inches |
| Product Line: | Keyence VT3 Series |
| Touchscreen: | Resistive |
| Brand: | Keyence |
| Display Colour: | 32,768 colours |
| Power Supply: | DC24V±10% |
| Storage Temperature: | -10 °C ~ +60 °C |
| Warranty: | 365 Days |
Related Keyence VT3 Series HMI Part No. :
| Keyence VT3 HMI | Description | Inventory status |
| VT3-V7R | Keyence VT3 Series Touch Screen Front Overlay Repair | In Stock |
| VT3-V8 | Keyence VT3 Series Protective Film Touch Panel Replacement | Available Now |
| VT3-V10 | Keyence VT3 Series Touch Digitizer Front Overlay Repair | In Stock |
| VT3-V10D | Keyence VT3 Series Protective Film HMI Touch Screen Replacement | In Stock |
| VT3-W4G | Keyence VT3 Series Front Overlay HMI Panel Glass Repair | Available Now |
| VT3-W4GA | Keyence VT3 Series Touch Membrane Protective Film Replacement | In Stock |
| VT3-W4M | Keyence VT3 Series Touchscreen Glass Front Overlay Repair | Available Now |
| VT3-W4MA | Keyence VT3 Series Protective Film Touch Panel Replacement | In Stock |
| VT3-W4T | Keyence VT3 Series Front Overlay HMI Touch Glass Repair | Available Now |
| VT3-W4TA | Keyence VT3 Series Touch Screen Protective Film Replacement | In Stock |
| VT3-X15 | Keyence VT3 Series Front Overlay Touch Digitizer Repair | In Stock |
| VT3-X15D | Keyence VT3 Series Protective Film Touch Membrane Replacement | In Stock |
| Keyence VT3 Series | Description | Inventory status |
Keyence VT3 Series HMI Manuals PDF Download:
FAQ:
Question: What must be considered in the installation of start switch of Keyence VT3 product?
Answer:
• Start switch may operate only in one position(mid position), mechanical stop or no start in other positions.
• For installation of mechanical equipment and wiring, always ensure that this equipment will not start unexpectedly. (for example, use start interlock function)
Question: How do I use the cable of Keyence VT3 VT3-S12D for terminal block？
Answer:
1.When twisted cable or single cable is processed directly: Confirm the end of the twisted cable is not exposed. Cannot galvanize for the end of cable.
2. When rod terminal with insulating sleeve is used: The cable may be not easy to insert into the insulating sleeve due to different thicknesses of cable sheath, then please select proper cable according to the outline dimension diagram.
Common misspellings:
T3-S12DVT3S12D
VT33-S12D
VT-3S12D
VT3-S1D2
