Keyence VT3-Q5T Protective Film Touch Screen Glass Repair
- Model
- VT3-Q5T
Item specifics
- Brand
- Keyence
- Size
- 5 inch
- Warranty
- 365 Days
- Product Line
- Keyence VT3
- Supply
- VT3-Q5T Touch Digitizer Protective Film
- Shipping
- 2-4 workdays
Review
Description
Keyence VT3 VT3-Q5T HMI Panel Glass Protective Film Repair Replacement
Order each part separately is available
Installation location
Do not install the VT3-Q5T Touch Screen Front Overlay VT3 product in the following places.
1. Exposed to direct sunlight.
2. The ambient temperature of VT3-Q5T HMI Panel Glass Protective Film is outside the 0-50°C range.
3. The ambient humidity is outside the 35-85% range.
4. Locations where dewing happens due to a dramatic change in temperature.
5. Locations where corrosive or flammable gas stays.
6. Locations of VT3-Q5T Protective Film Touch Panel exposed to heavy dust, salt, chip and smoke.
7. Locations that are subject to vibration or impact.
8. Locations of VT3-Q5T Touchscreen Overlay that are exposed to spraying water, oil, medicine, etc.
9. Exposed to strong magnetic and electric fields.
Specifications:
The table below describes the parameters of the Keyence VT3 VT3-Q5T Protective Film Touch Digitizer HMI Parts.
| Cooling Method: | Natural air circulation |
| Backlight: | LED Back Light |
| Brand: | Keyence |
| Product Line: | Keyence VT3 |
| Touch Size: | 5" |
| Display Colors: | 32,768 Colors |
| Display Type: | TFT LCD |
| Operation Temp.: | 0 °C ~ 50 °C |
| Resolution: | 320 x 240 pixels |
| Warranty: | 12-Month Warranty |
Related Keyence VT3 Series Part No. :
| Keyence VT3 HMI | Description | Inventory status |
| VT3-V7R | Keyence VT3 Series Touch Screen Front Overlay Repair | In Stock |
| VT3-V8 | Keyence VT3 Series Protective Film Touch Panel Replacement | Available Now |
| VT3-V10 | Keyence VT3 Series Touch Digitizer Front Overlay Repair | In Stock |
| VT3-V10D | Keyence VT3 Series Protective Film HMI Touch Screen Replacement | In Stock |
| VT3-W4G | Keyence VT3 Series Front Overlay HMI Panel Glass Repair | Available Now |
| VT3-W4GA | Keyence VT3 Series Touch Membrane Protective Film Replacement | In Stock |
| VT3-W4M | Keyence VT3 Series Touchscreen Glass Front Overlay Repair | Available Now |
| VT3-W4MA | Keyence VT3 Series Protective Film Touch Panel Replacement | In Stock |
| VT3-W4T | Keyence VT3 Series Front Overlay HMI Touch Glass Repair | Available Now |
| VT3-W4TA | Keyence VT3 Series Touch Screen Protective Film Replacement | In Stock |
| VT3-X15 | Keyence VT3 Series Front Overlay Touch Digitizer Repair | In Stock |
| VT3-X15D | Keyence VT3 Series Protective Film Touch Membrane Replacement | In Stock |
| Keyence VT3 Series | Description | Inventory status |
Keyence VT3 Series HMI Manuals PDF Download:
FAQ:
Question: What should I pay attention to when installing the emergency stop switch?
Answer:
• For the installation and wiring of emergency stop switch, one of the following operations must work: for mechanical equipment that might cause dangerous state, cut off power supply of the actuator immediately(stop category 0), or control power suppl of the actuator y(stop category 1), so as to stop the dangerous running as soon as possible.
• When the emergency stop switch is pressed, emergency stop must have priority over other functions,and all operating modes.
• The emergency stop switch should be installed and wired such that it will not automatically return (restarted)even if it is reset.
• The emergency stop switch should be set up and wired such that operators have the easiest access to it in case of emergency.
Question: What determines PL (performance level) and categories?
Answer: PL (performance level), category supported by Touch Panel Display VT3 Hand-Held Series are determined by whether emergency stop button switch (OP-87171), start switch, and relay terminal block unit with removable function (VT-T1) etc optional parts are used for safety function.
Common misspellings:
T3-Q5TVT3-5T
VT3-Q55T
VT-3Q5T
VT3-QT5
