Keyence VT3-S10B Touch Panel Protective Film Repair
Keyence VT3-S10B Touch Panel Protective Film Repair
Model
VT3-S10B

Item specifics

Brand
Keyence
Size
10 inch
Warranty
365 Days
Product Line
Keyence VT3
Supply
VT3-S10B Front Overlay Touchscreen Glass
Shipping
2-4 workdays

Review

Description

Keyence VT3 VT3-S10B Touch Screen Glass Front Overlay Repair Replacement


Keyence VT3 VT3-S10 Front Overlay Touch Screen Repair Replacement

Ambient temperature/humidity precautions
Pay attention to the following points when installing the VT3-S10B Touchscreen Protective Film VT3 inside a control panel.
• When the ambient temperature is higher than 40°C, please use it at a maximum absolute humidity of 85% RH at 40°C.
• Do not install the VT3-S10B Front Overlay Touch Panel VT3 in a location where the ambient temperature exceeds the 0 to 50°C, or the ambient humidity exceeds the 35 to 85% RH range.
• If the ambient temperature of VT3-S10B HMI Panel Glass Protective Film exceeds the above range, install a forced air cooling fan or air conditioner to keep the ambient temperature within this range.
• Allow as much space as possible between the VT3 and surrounding structures and other components to improve maintainability, operability and ventilation.
• Do not mount the VT3-S10B Touch Digitizer Front Overlay VT3 directly above equipment (e.g. heaters, transformers, inverters and equipment with large resistance) that generate lots of heat.
• Do not use PORT1 (USB) in locations that are subject to vibration or impact. The USB connector is not provided with a locking function, so the USB cable may become loose or disconnected, and disrupt communications.



Specifications:

The table below describes the parameters of the Keyence VT3 VT3-S10B Touch Digitizer Protective Film HMI Parts.

Cooling Method: Natural air circulation
Backlight: LED Back Light
Brand: Keyence
Product Line: Keyence VT3
Touch Size: 10"
Display Colors: 32,768 Colors
Display Type: TFT LCD
Operation Temp.: 0 °C ~ 50 °C
Resolution: 800 x 600 pixels
Warranty: 12-Month Warranty


Related Keyence VT3 Series Part No. :

Keyence VT3 HMI Description Inventory status
VT3-V7R Keyence VT3 Series Touch Screen Front Overlay Repair In Stock
VT3-V8 Keyence VT3 Series Protective Film Touch Panel Replacement Available Now
VT3-V10 Keyence VT3 Series Touch Digitizer Front Overlay Repair In Stock
VT3-V10D Keyence VT3 Series Protective Film HMI Touch Screen Replacement In Stock
VT3-W4G Keyence VT3 Series Front Overlay HMI Panel Glass Repair Available Now
VT3-W4GA Keyence VT3 Series Touch Membrane Protective Film Replacement In Stock
VT3-W4M Keyence VT3 Series Touchscreen Glass Front Overlay Repair Available Now
VT3-W4MA Keyence VT3 Series Protective Film Touch Panel Replacement In Stock
VT3-W4T Keyence VT3 Series Front Overlay HMI Touch Glass Repair Available Now
VT3-W4TA Keyence VT3 Series Touch Screen Protective Film Replacement In Stock
VT3-X15 Keyence VT3 Series Front Overlay Touch Digitizer Repair In Stock
VT3-X15D Keyence VT3 Series Protective Film Touch Membrane Replacement In Stock
Keyence VT3 Series Description Inventory status


Keyence VT3 Series HMI Manuals PDF Download:

  • VT3 Series Hardware Manual
  • VT3-V6H_Datasheet
  • VT3-V7 Datasheet
  • VT3-V8_Datasheet

  • FAQ:

    Question: What determines the mounting angle?

    Answer:
    Mounting angle depends on ambient temperature and Back Light adjustment. Adjust the mounting angle to suit the mounting circumstances.
    What determines the mounting angle?
    What determines the mounting angle?


    Question: What must be considered in the installation of start switch?

    Answer:
    • Start switch may operate only in one position(mid position), mechanical stop or no start in other positions.
    • For installation of mechanical equipment and wiring, always ensure that this equipment will not start unexpectedly. (for example, use start interlock function)

    Common misspellings: 

    VT3S10
    VT33-S10
    VT3-S110
    VT3S-10
    VT3-S01