KOYO DP-M321 HMI Touch Panel Protective Film Replacement
- Model
- DP-M321
Item specifics
- Brand
- KOYO
- Size
- 6 inch
- Warranty
- 365 Days
- Product Line
- Machine Koyo Parts
- Supply
- DP-M321 Front Overlay Touch Membrane
- Shipping
- 2-4 workdays
Review
Description
Koyo DP-M321 Touch Panel Front Overlay Replacement Repair Part
Koyo DP-M321 Front Overlay Touch Membrane Terminal is fully programmable touch panels, providing power and flexibility through a rich set of features. The DP-M321 HMI Panel Glass Protective Film back-lit LCD display is available in either monochrome (DP-M321) or color (DP-C321). The DirectTouch Panel is configured using the ScreenCreator software. The software is a graphics editor with built-in panel parts such as number keypads, pushbuttons, indicator lights, meters and graphs.
VICPAS supplies KOYO DP-M321 Protective Film and Touch Panel with 365 days warranty and support Urgent Worldwide Shipping. It is important to understand the installation requirements for operator interfaces. Sometimes the size alone can dictate your choice of DP-M321 Touch Screen Monitor Front Overlay unit. This is especially true with respect to the depth of the DP-M321 Touch Panel Protective Film unit. Please make sure you consider the space required for proper access to cables, power wiring, etc. Also, you may need to consider the environmental requirements, agency approvals, etc. for your application.
Specifications:
The table below describes the parameters of the Koyo DP-M321 Touch Screen Monitor Front Overlay HMI Parts.
| Ambient temperature: | 0°C (32°F) to 50°C (122°F) |
| Display Resolution: | 320 x 240 pixels |
| Part Number: | DP-M321 |
| Product Line: | Koyo auto parts |
| Touch Size: | 5.7" |
| Brand: | KOYO |
| Display Type: | Backlit LCD |
| Power supply: | 24 V DC |
| Storage Temperature: | -20°C (-4°F) to 60°C (140°F) |
| Warranty: | 365 Days |
Related Koyo Auto Machine HMI Part No. :
| KOYO Auto Part | Description | Inventory status |
| DP-C320 | KOYO Machine Parts HMI Front Overlay Touch Membrane | In Stock |
| DP-C321 | Koyo Auto Parts HMI Panel Glass Protective Film Repair | In Stock |
| DP-M321 | Machine Koyo Touch Digitizer Glass Front Overlay Replacement | Available Now |
| GC-11MU-4 | KOYO Protective Film Touch Screen Panel Replacement Repair | Available Now |
| GC-3LC | Koyo Touch Screen Monitor Front Overlay Repair | In Stock |
| GC-3LC2 | Koyo Protective Film MMI Touch Screen Repair | In Stock |
| GC-3LM | Koyo HMI Touch Screen Panel Front Overlay Replacement | Available Now |
| GC-3LM2 | Koyo Protective Film Touchscreen Repair Replacement | In Stock |
| GC-73LCL-R | Koyo GC-7 Series HMI Front Overlay Touch Screen Glass | Available Now |
| GC-73LC-R | Koyo GC7 Series Protective Film Touch Screen Panel Repair | In Stock |
| GC-73LM-R | KOYO GC-7 Series Front Overlay HMI Panel Glass Replacement | In Stock |
| GC-76LC | Koyo GC7 Series Touch Panel Protective Film Repair | Available Now |
| Automation Koyo | Description | Inventory status |
KOYO Machine HMI Manuals PDF Download:
FAQ:
Question: Optional Protective Cover Installation
Solution:
Step 1: Gather the parts of the protective cover; top shell, bottom shell, label insert, and wire tie. The picture shows the wire tie (top), label insert (right), bottom shell (left), and top shell (lower right).
Step 2: Insert your pre-wired connector (with the screws facing up) into the bottom shell. (See manual for cable wiring instructions).
Step 3: Insert the wire tie from the bottom shell, loop around the cable and come back out of the opposite hole in the bottom shell.
Step 4: Tighten the wire tie around the cable and the bottom shell.
Step 5: Seat the top shell onto the bottom as shown. Insert label strip (if desired) in slot on top shell and bottom shell.
Step 6: Snap the top and bottom shells together.
Common misspellings:
DP-321P-M321
DP-3M21
DP-M3Z1
DPp-M321
