FPM-180 FPM-180-TS Protective Film Touch Screen Repair

Order each part separately is available

VICPAS supplies Automation Direct FPM-180 FPM-180-TS Protective Film and Touch Panel with 365 days warranty and support Urgent Worldwide Shipping.

Display Features
􀂧 The FPM-180(-TS) is capable of displaying 16M (24 Bit) colors in a continuous spectrum. The high-contrast LCD enhances the image with no geometric distortion.
􀂧 FPM-180(-TS) Series directly accepts an analog 5-wire RGB with separate H/V (Horizontal / Vertical) sync. This is the standard PC video signal. The FPM-180(-TS) Series is auto synchronous, adjusting the display to the appropriate input between VGA and SXGA.
􀂧 The FPM-180(-TS) Series is supplied with an Anti-Glare Touch Screen [TS models] or an Anti-Glare impact window on non-touchscreen models.
􀂧 The FPM-180(-TS) Series has an integrated 115/220VAC power supply as standard on all models.

Automation Direct FPM-180 FPM-180-TS Front Overlay Touch Membrane display has an embedded microprocessor on the converter card [the electronics that drive the LCD], and has been recently updated with a more powerful chipset. In most cases, the unit will require very little if any user intervention to operate correctly. That is, produce a sharp, stable picture. The microprocessor in the FPM-180 FPM-180-TS HMI Panel Glass Protective Film display has the capability to adjust itself to the computer to which it is attached. This auto-adjustment will take place when the unit is first installed and connected to a computer if the video input changes or the user initiates it. If the picture is not satisfactory, the first step is to allow the unit to attempt to re-adjust itself to your computer.