6AG1331-7NF00-2AB0 6AG1331-7NF10-2AB0 Plastic Shell

Particularly in systems where sensors detect and/or process relatively low voltages and/or currents, it may be advisable to perform recalibration when the 6AG1331-7NF00-2AB0 6AG1331-7NF10-2AB0 Plastic Shell module is in the system including all connected cables. This approach compensates any influence by cables and/or temperature.
If you carry out a calibration procedure, new calibration values are detected and saved retentively on the 6AG1331-7NF00-2AB0 6AG1331-7NF10-2AB0 Housing module. This means that the calibration values determined for the module at the factory prior to delivery are not lost when users perform their own calibration work.
You can revert to these original calibration values at any time.

SIMATIC Outdoor 6AG1331-7NF00-2AB0 6AG1331-7NF10-2AB0 Plastic Shell modules are modules that can be used under extended environmental conditions. Extended environmental conditions mean:
 operation possible at temperatures from –25°C to +60°C
 occasional, brief condensation permitted
 increased mechanical stress permissible

The functional scope and technical specifications for the SIMATIC Outdoor 6AG1331-7NF00-2AB0 6AG1331-7NF10-2AB0 HMI Case modules correspond to those of the ”standard” modules. The mechanical and climatic environmental conditions as well as their test method have changed. The SIMATIC Outdoor 6AG13317NF002AB0 6AG13317NF102AB0 Plastic Case Cover modules have their own order numbers