Siemens SIMATIC S7 300 6AG1331-1KF02-7AB0 HMI Case
Siemens SIMATIC S7 300 6AG1331-1KF02-7AB0 HMI Case
Model
6AG1331-1KF02-7AB0

Item specifics

Brand
Siemens
Warranty
365 Days
Product Line
Siemens SIMATIC S7-300 Plastic Housing
Supply
Siemens SIMATIC S7 300 SM 331 analog input modules
Siemens S7-300
6AG1331-1KF02-7AB0
Model
6AG1 331-1KF02-7AB0
Number
6AG13311KF027AB0

Review

Description

6AG1331-1KF02-7AB0 Siemens SIMATIC S7-300 Module Housing Repair Replacement


6AG1331-1KF02-7AB0 Siemens SIMATIC S7-300 331 analog input modules Plastic Shell Repair Replacement

S7-300 6AG13311KF027AB0 SM 331 analog input modules HMI Case systems are intended for stationary use in locations protected against the weather. The operating conditions surpass the requirements of DIN IEC 60721-3-3.
 Class 3M3 (mechanical requirements)
 Class 3K3 (climatic requirements)


SIPLUS S7-300 SM 331 8AI based on 6ES7331-1KF02-0AB0 Plastic Shell with conformal coating,
-25…+70 °C,
isolated 8 AI,
resolution 13 bit U/I/resistance/Pt100, NI100, NI1000, LG-NI1000, PTC/KTY, 66 ms conversion time;
1x 40-pole


VICPAS supply 6AG1331-1KF02-7AB0 Siemens S7 300 Simatic Module Plastic Case Cover Replacement Part. All of them with VICPAS 365 days warranty and support Urgent Worldwide Shipping.





Specifications:

The table below describes the parameters of the 6AG1331-1KF02-7AB0 Siemens SIMATIC SM 331 analog input modules Case Parts.

Part Number : 6AG1331-1KF02-7AB0
Atmospheric pressure: 1080 to 660 hPa
Temperature: –40 °C to +70°C
Warranty: 365 days Warranty
Product Line: Siemens Simatic S7-300
Dimensions W x H x D (mm): 40 x 120.4 x 110.8
Safety isolation: SELV circuit
Power consumption: 57 W
Power loss: Typ. 9 W
Efficiency: 84 %


Related Siemens Simatic S7-300 Part No. :

Siemens Simatic S7-300 Description Inventory status
6AG1322-1FH00-7AA0 Siemens S7-300 SM 322 Plastic Case Replacement In Stock
6AG1322-1HF10-2AA0 SIMATIC S7 300 SM322 HMI Enclosure Replacement In Stock
6AG1322-1HH01-2AA0 SIMATIC S7 300 Plastic Case SM 322 Replacement Available Now
6AG1322-5FF00-4AB0 Siemens S7-300 SM 322 Housing Repair Replacement Available Now
6AG1322-5HF00-4AB0 Siemens S7-300 Plastic Shell SM 322 Repair In Stock
6AG1322-8BF00-2AB0 SIMATIC S7 300 HMI Case SM 322 Replacement Available Now
6AG1323-1BH01-2AA0 Siemens S7-300 SM 323 Housing Replacement In Stock
SIPLUS S7 300 PLC Description Inventory status

Siemens SIMATIC S7-300 HMI Manuals PDF Download:

  • 6AG13311KF027AB0 Datasheet
  • 6AG13317KB022AB0 Datasheet
  • 6AG13317KF022AB0 Datasheet
  • SIEMENS SIMATIC S7-300 Getting Started for First Time Users
  • SIEMENS SIMATIC S7-300 Module Data Equipment Manual 2022
  • SIEMENS SIMATIC S7-300 Module Data Manual 2013
  • SIEMENS SIMATIC S7-300 Module Data Manual 2017
  • SIEMENS SIMATIC S7-300 Programmable Controller Hardware and Installation Manual
  • SIEMENS SIMATIC S7-300 Programmable Controller Module Specifications Reference Manual
  • SIEMENS SIMATIC S7-300

  • FAQ:

    Question: Putting a New 6AG1331-1KF02-7AB0 Plastic Case Cover Body Module into Service

    Answer: Proceed as follows to put the new module into service:
    1. Open the front panel.
    2. Reinstall the front connector.
    3. Close the front panel.
    4. Switch the load voltage back on.
    5. Set the CPU to RUN mode again.
    Putting a New 6AG1331-1KF02-7AB0 Plastic Case Cover Body Module into Service


    Question: When should I use expansion devices?

    Answer: You can use EDs if the number of CU slots is insufficient for your application.
    When using EDs, you might require further power supply modules in addition to the extra module racks and interface modules (IM). When using interface modules, you must ensure compatibility of the partner stations.


    Common misspellings: 

    6AG1331-1KF02-7A0
    AG1331-1KF02-7AB0
    6AG1331-1KF02-A7B0
    6AG1331-1KF02-7A80
    6AG11331-1KF02-7AB0