Siemens SIMATIC S7 300 6AG1321-7BH01-2AB0 Plastic Cover
Siemens SIMATIC S7 300 6AG1321-7BH01-2AB0 Plastic Cover
Siemens SIMATIC S7 300 6AG1321-7BH01-2AB0 Plastic Cover
Siemens SIMATIC S7 300 6AG1321-7BH01-2AB0 Plastic Cover
Siemens SIMATIC S7 300 6AG1321-7BH01-2AB0 Plastic Cover
Siemens SIMATIC S7 300 6AG1321-7BH01-2AB0 Plastic Cover
Model
6AG1321-7BH01-2AB0

Item specifics

Brand
Siemens
Warranty
365 Days
Product Line
Siemens SIMATIC S7-300 Plastic Shell
Supply
Siemens SIMATIC SM 321 digital input module
Siemens S7-300
6AG1321-7BH01-2AB0
Model
6AG1 321-7BH01-2AB0
Number
6AG13217BH012AB0

Review

Description

Siemens SIMATIC S7-300 Module 6AG1321-7BH01-2AB0 Plastic Shell Repair Replacement


Siemens SIMATIC S7-300 SM 321 digital input modules 6AG1321-7BH01-2AB0 Enclosure Repair Replacement

The S7-300 6AG1 321-7BH01-2AB0 Module HMI Case, for example, must not be used without taking additional measures:
 in locations exposed to a high degree of ionizing radiation
 in hostile environments caused, for instance, by
– dust accumulation
– corrosive vapors or gases
– strong electric or magnetic fields
 in installations requiring special monitoring, for example
– elevators
– electrical installations in particularly hazardous areas
An additional measure might be, for instance, installation of the S7-300 6AG1321-7BH01-2AB0 Plastic Case in a cabinet or in a housing.


Digital input module SM 321; DI 16 x 24 VDC; with hardware and diagnostic interrupts 6AG1321-7BH01-2AB0 Housing Body Properties
Properties of SM 321; DI 16 x DC 24 V with hardware and diagnostic interrupts:
• 16 inputs, electrically isolated in groups of 16
• Rated input voltage 24 V DC
• Input characteristics to IEC 61131, Type 2
• suitable for switches and 2- /3-/4-wire proximity switches (BEROs)
• 2 short circuit proof sensor supplies for each group of 8 channels
• external redundant sensor supply is supported
• "Sensor supply (Vs)" status display
• Group error display (SF)
• Supports isochronous mode
• Supports parameter reassignment in RUN
• Programmable diagnostics
• Programmable diagnostic interrupt
• Programmable hardware interrupts
• Programmable input delays




Specifications:

The table below describes the parameters of the Siemens SIMATIC SM 321 digital input modules 6AG1321-7BH01-2AB0 Plastic Case Parts.

Atmospheric pressure: 1080 to 660 hPa
Part Number : 6AG1321-7BH01-2AB0
Product Line: Siemens Simatic S7-300
Temperature: –40 °C to +70°C
Warranty: 365 days Warranty
Dimensions W x H x D (mm): 40 x 120.4 x 110.8
Efficiency: 84 %
Power consumption: 57 W
Power loss: Typ. 9 W
Safety isolation: SELV circuit


Related Siemens Simatic S7-300 Part No. :

Siemens Simatic S7-300 Description Inventory status
6AG1195-7KF00-2XA0 Siemens S7-300 safety protector HMI Case Replacement In Stock
6AG1321-1BH02-2AA0 Siemens SIPLUS S7-300 Plastic Case SM 321 Replacement Available Now
6AG1321-1CH20-2AA0 SIMATIC S7 300 SM 321 Plastic Shell Repair Part In Stock
6AG1321-1FF01-2AA0 Siemens S7-300 SM 321 Housing Enclosure Repair Available Now
6AG1321-1FF10-7AA0 Siemens S7-300 SM 321 Plastic Shell Replacement In Stock
6AG1321-1FH00-7AA0 Siemens S7-300 SM 321 Plastic Case Replacement In Stock
6AG1321-7BH01-2AB0 SIMATIC S7 300 SM321 HMI Enclosure Replacement In Stock
6AG1321-7TH00-4AB0 SIMATIC S7 300 Plastic Case SM 321 Replacement Available Now
6AG1322-1BF01-2XB0 Siemens S7-300 SM 322 Housing Repair Replacement Available Now
6AG1322-1BH01-2AA0 Siemens S7-300 Plastic Shell SM 322 Repair In Stock
6AG1322-1CF00-7AA0 SIMATIC S7 300 HMI Case SM 322 Replacement Available Now
6AG1322-1FF01-7AA0 Siemens S7-300 SM 322 Housing Replacement In Stock
SIPLUS S7 300 PLC Description Inventory status

Siemens SIMATIC S7-300 HMI Manuals PDF Download:

  • 6AG13217BH012AB0 Datasheet
  • 6AG13217BH014AS0 Datasheet
  • SIEMENS SIMATIC S7-300 Getting Started for First Time Users
  • SIEMENS SIMATIC S7-300 Module Data Equipment Manual 2022
  • SIEMENS SIMATIC S7-300 Module Data Manual 2013
  • SIEMENS SIMATIC S7-300 Module Data Manual 2017
  • SIEMENS SIMATIC S7-300 Programmable Controller Hardware and Installation Manual
  • SIEMENS SIMATIC S7-300 Programmable Controller Module Specifications Reference Manual
  • SIEMENS SIMATIC S7-300

  • FAQ:

    Question: What is the 6AG1321-7BH01-2AB0 Siemens Simatic S7-300 Module Plastic Cover parts price?

    Answer: Submit a fast quote, send VICPAS an email for best price.


    Question: One or multiple module racks?

    Answer: The answer to this query is based on the nature of your application. Reasons for using a single module rack could be:
    • Compact, space-saving module application
    • Central module application
    • Low volume of signals to be processed
    Possible reasons for distribution to multiple module racks:
    • High volume of signals to be processed
    • No more slots available
    Tip: If you choose installation on a single module rack, insert a dummy module to the right side of the CPU (Order No.: 6ES7 321-1BH50-0AA0 Housing). This gives you the option of inserting a second module rack for your application in the future, simply by replacing the dummy module with an interface module and without having to reinstall and rewire the first module rack.


    Common misspellings: 

    6AG1321-7BH01-2B0
    6G1321-7BH01-2AB0
    6AG1321-7BH01-A2B0
    6AG1321-7BH01-2A80
    6AG11321-7BH01-2AB0