Siemens SIMATIC S7 300 6ES7322-1FH00-0AA0 HMI Case
- Model
- 6ES7322-1FH00-0AA0
Item specifics
- Brand
- Siemens
- Warranty
- 365 Days
- Product Line
- Siemens SIMATIC S7-300 Plastic Housing
- Supply
- Siemens SIMATIC S7 300 SM322 digital output module
- Siemens S7-300
- 6ES7322-1FH00-0AA0
- Model
- 6ES7 322-1FH00-0AA0
- Number
- 6ES73221FH000AA0
Review
Description
6ES7322-1FH00-0AA0 Siemens SIMATIC S7-300 Module Housing Repair Replacement
S7-300 6ES73221FH000AA0 SM 322 digital output modules HMI Case systems are intended for stationary use in locations protected against the weather. The operating conditions surpass the requirements of DIN IEC 60721-3-3.
Class 3M3 (mechanical requirements)
Class 3K3 (climatic requirements)
Digital output module SM 322; DO 16 x AC 120/230 V/1 A; (6ES7322-1FH00-0AA0 Plastic Shell) Properties
Properties of digital output module SM 322; DO 16 x AC120/230 V/1 A:
● 16 outputs, fused and electrically isolated in groups of 8
● Output current 1 A
● Rated load voltage 120/230 VAC
● Suitable for AC solenoids, actuators, motor starters, FHP motors and signal lamps
VICPAS supply 6ES7322-1FH00-0AA0 Siemens S7 300 Simatic Module Plastic Case Cover Replacement Part. All of them with VICPAS 365 days warranty and support Urgent Worldwide Shipping.
Specifications:
The table below describes the parameters of the 6ES7322-1FH00-0AA0 Siemens SIMATIC SM 322 digital output modules Case Parts.
| Part Number : | 6ES7322-1FH00-0AA0 |
| Atmospheric pressure: | 1080 to 660 hPa |
| Temperature: | –40 °C to +70°C |
| Warranty: | 365 days Warranty |
| Product Line: | Siemens Simatic S7-300 |
| Dimensions W x H x D (mm): | 40 x 120.4 x 110.8 |
| Safety isolation: | SELV circuit |
| Power consumption: | 57 W |
| Power loss: | Typ. 9 W |
| Efficiency: | 84 % |
Related Siemens Simatic S7-300 Part No. :
| Siemens Simatic S7-300 | Description | Inventory status |
| 6ES7322-1BF01-0AA0 | Siemens Simatic S7-300 SM 322 HMI Case Replacement | In Stock |
| 6ES7322-1BH01-0AA0 | Siemens SIPLUS S7-300 Plastic Case SM 322 Replacement | Available Now |
| 6ES7322-1BH10-0AA0 | SIMATIC S7 300 SM 322 Plastic Shell Repair Part | In Stock |
| 6ES7322-1BL00-0AA0 | Siemens S7-300 SM 322 Housing Enclosure Repair | Available Now |
| 6ES7322-1CF00-0AA0 | Siemens S7-300 SM 322 Plastic Shell Replacement | In Stock |
| 6ES7322-1FF01-0AA0 | Siemens S7-300 SM 322 Plastic Case Replacement | In Stock |
| 6ES7322-1FH00-0AA0 | SIMATIC S7 300 SM322 HMI Enclosure Replacement | In Stock |
| 6ES7322-1FL00-0AA0 | SIMATIC S7 300 Plastic Case SM 322 Replacement | Available Now |
| 6ES7322-1HF01-0AA0 | Siemens S7-300 SM 322 Housing Repair Replacement | Available Now |
| 6ES7322-1HF10-0AA0 | Siemens S7-300 Plastic Shell SM 322 Repair | In Stock |
| 6ES7322-1HH01-0AA0 | SIMATIC S7 300 HMI Case SM 322 Replacement | Available Now |
| SIPLUS S7 300 PLC | Description | Inventory status |
Siemens SIMATIC S7-300 HMI Manuals PDF Download:
FAQ:
Question: Putting a New 6ES7322-1FH00-0AA0 Plastic Case Cover Body Module into Service
Answer: Proceed as follows to put the new module into service:
1. Open the front panel.
2. Reinstall the front connector.
3. Close the front panel.
4. Switch the load voltage back on.
5. Set the CPU to RUN mode again.
Question: When should I use expansion devices?
Answer: You can use EDs if the number of CU slots is insufficient for your application.
When using EDs, you might require further power supply modules in addition to the extra module racks and interface modules (IM). When using interface modules, you must ensure compatibility of the partner stations.
Common misspellings:
6ES7322-1FH0-0AA0ES7322-1FH00-0AA0
6ES7322-1FH0-00AA0
6EST322-1FH00-0AA0
6ES7322-1FH000-0AA0
