6FC5203-0AF11-2AA0 Membrane keypad keyboard
6FC5203-0AF11-2AA0 Membrane keypad keyboard
6FC5203-0AF11-2AA0 Membrane keypad keyboard
6FC5203-0AF11-2AA0 Membrane keypad keyboard
6FC5203-0AF11-2AA0 Membrane keypad keyboard
6FC5203-0AF11-2AA0 Membrane keypad keyboard
Model
6FC5203-0AF11-2AA0 OP010FT

Item specifics

Keypad Button Material
Metal
Membrane Material
Plastic
Application
Industry Equipment
Place of Origin
China

Review

Description

6FC5203-0AF11-2AA0 Siemens SINUMERIK HMI OP010 OPERATOR PANEL Plastic Shell Cover and Terminal Keypad Repair Replacement

Order each part separately is available

6FC52030AF112AA0 Siemens SINUMERIK HMI OP010 OPERATOR PANEL Membrane Keypad and Plastic Case Shell Repair Replacement

General Information of Siemens OP010 6FC5203-0AF11-2AA0 Plastic Case Terminal Keypad
You can work in three different operating modes.

1."JOG" mode is used for the following preparatory actions:
• Reference point approach,i.e.calibration of the position measuring system of 6FC5 203-0AF11-2AA0.
• Preparing a machine for executing a program in automatic mode,i.e.measuring tools, measuring the workpiece and, if necessary, defining the work offsets used in the program.
• Traversing axes,e.g.during a program interruption.
• Positioning axes of 6FC52030AF112AA0 Operator Panel Keypad Housing.
• Select "JOG" and press the "JOG" key.

2."Ref Point" submode:
• The "REF POINT" submodel of 6FC5203-0AF11-2AA0 Membrane Keyboard Keypad Plastic Case is used to synchronize the control and the machine. For this purpose, you approach the reference point in "JOG" mode.
• Selecting "REF POINT" and press the "REF POINT" key of 6FC5 203-0AF11-2AA0.

3."REPOS" submode:
• The "REPOS" submode is used for repositioning to a defined position. After a program interruption (e.g.to correct tool wear values)move the tool away from the contour in "JOG" mode.
• The distances traversed in "JOG" mode of 6FC52030AF112AA0 HMI Cover Keypad Membrane are displayed in the actual value window as the "Repos" offset.

Note:
• Press the "CYCLE STOP" key of 6FC5203-0AF11-2AA0 Switch Membrane.
• Machining stops immediately. Individual program blocks are not executed to the end. On the next start, machining is resumed from the point where it left off.

Stopping machining:
• Press the "CYCLE STOP" key of 6FC5 203-0AF11-2AA0.
• Machining stops immediately. Individual program blocks are not executed to the end. On the next start, machining is resumed from the point where it left off.

Canceling machining:
• Press the "RESET" key of 6FC52030AF112AA0 Housing Operator Keyboard.
• Execution of the program is interrupted. On the next start, machining will start from the beginning.




Specifications:

The table below describes the parameters of the 6FC5203-0AF11-2AA0 Siemens OP010 HMI Parts.

Mounting Format: 19''
Softkeys: 8 + 4 Horizontal
Combination: PCU and TCU
Product Line: Siemens OP010
Parameter Values: 15 Positions
Input Voltage: DC 5 V
Resolution: 640 x 480 Pixels
Attachment: Tension Jacks
Design of Display: LC Display
Flat Screen: 10.4 in TFT


Related Simatic OP010 Part No. :

SINUMERIK OP010 Keypad Description Inventory status
6FC5203-0AF00-0AA0 Siemens SINUMERIK HMI OP010 Terminal Keypad HMI Case Repair In Stock
6FC5203-0AF00-0AA1 Siemens OP010 Membrane Switch Housing Replacement Available Now
6FC5203-0AF00-0AA3 Siemens SINUMERIK Plastic Case Operator Keyboard Repair In Stock
6FC5203-0AF01-0AA0 Siemens OP010 Keypad Membrane HMI Cover Replacement In Stock
6FC5203-0AF11-1AA0 Siemens OP010 HMI Case Membrane Keypad Switch Repair Available Now
6FC5203-0AF11-2AA0 Siemens SINUMERIK Keyboard Membrane Housing Replacement In Stock
6FC5203-0AF12-0AA1 Siemens SINUMERIK OP010 Terminal Keypad Plastic Cover Repair Available Now
6FC5248-0AF00-0AA0 Siemens OP010 Housing Switch Membrane Repair Available Now
6FC5248-0AF00-0AA2 SINUMERIK OP010 Membrane Keypad Plastic Case Replacement In Stock
Siemens OP010 Part No. Description Inventory status


Siemens OP010 series HMI Manuals PDF Download:


FAQ:

Question: Is Siemens 6FC52030AF112AA0 OP010 LUD or PUD?

Answer: The Possible storage locations of 6FC5 203-0AF11-2AA0 OP010 are NC, Local drive, Network drives or USB drives.


Question: How to set the data of 6FC5203-0AF11-2AA0?

Answer:
• You can only make changes in "AUTO"mode when in the RESET condition.These changes are then immediate.
• You can make changes in "JOG"mode at any time.These changes,however,only become active at the start of a new motion.
How to set the data of 6FC5203-0AF11-2AA0?

Common misspellings: 

FC5203-0AF11-2AA0
6FC203-0AF11-2AA0
66FC5203-0AF11-2AA0
6FC5203-0AF111-2AA0
6FC5203-0AF11-A2A0