6FC5203-0AF12-0AA1 Switch Membrane Plastic Housing

Model: 6FC5203-0AF12-0AA1 OP010

Item specifics

Keypad Button Material: Metal

Membrane Material: Plastic

Application: Industry Equipment

Place of Origin: China

Review

Description

6FC5203-0AF12-0AA1 Siemens SINUMERIK HMI OP010 OPERATOR PANEL Membrane Keypad and HMI Case Cover Repair Replacement

Order each part separately is available

6FC52030AF120AA1 Siemens SINUMERIK HMI OP010 OPERATOR PANEL Plastic Case and Membrane Keyboard Repair Replacement

General Information of Siemens 6FC5203-0AF12-0AA1 HMI Cover Membrane Switch
You can work in three different operating modes.

1."JOG" mode is used for the following preparatory actions:
• Reference point approach,i.e.calibration of the position measuring system of 6FC5 203-0AF12-0AA1.
• Preparing a machine for executing a program in automatic mode,i.e.measuring tools, measuring the workpiece and, if necessary, defining the work offsets used in the program.
• Traversing axes,e.g.during a program interruption.
• Positioning axes of Siemens 6FC52030AF120AA1 Terminal Keypad Plastic Case.
• Select "JOG" and press the "JOG" key.

2."Ref Point" submode:
• The "REF POINT" submodel of 6FC5203-0AF12-0AA1 HMI Case Membrane Keyboard Keypad is used to synchronize the control and the machine. For this purpose, you approach the reference point in "JOG" mode.
• Selecting "REF POINT" and press the "REF POINT" key of 6FC5 203-0AF12-0AA1.

3."REPOS" submode:
• The "REPOS" submode is used for repositioning to a defined position. After a program interruption (e.g.to correct tool wear values)move the tool away from the contour in "JOG" mode.
• The distances traversed in "JOG" mode of 6FC52030AF120AA1 Operator Keyboard are displayed in the actual value window as the "Repos" offset.

Note:
• Press the "CYCLE STOP" key of 6FC5203-0AF12-0AA1 Plastic Shell Terminal Keypad.
• Machining stops immediately. Individual program blocks are not executed to the end. On the next start, machining is resumed from the point where it left off.

Stopping machining:
• Press the "CYCLE STOP" key of 6FC5 203-0AF12-0AA1 Keyboard Membrane Housing.
• Machining stops immediately. Individual program blocks are not executed to the end. On the next start, machining is resumed from the point where it left off.

Canceling machining:
• Press the "RESET" key of 6FC52030AF120AA1 Membrane Keypad Switch HMI Case.
• Execution of the program is interrupted. On the next start, machining will start from the beginning.

Contact Best Price

Specifications:

The table below describes the parameters of the 6FC5203-0AF12-0AA1 Siemens OP010 HMI Parts.

Resolution:	640 x 480 Pixels
Depth:	Small Mounting Depth
Combination:	PCU and TCU
Softkeys:	8 + 4 Horizontal
Degree of Protection:	IP65

Flat Screen:	10.4 in TFT
Interface:	Front USB Interface
Input Voltage:	DC 5 V
Part Number:	6FC5203-0AF12-0AA1
Design of Display:	LC Display

Related Simatic OP010 Part No. :

SINUMERIK OP010 Keypad	Description	Inventory status
6FC5203-0AF00-0AA0	Siemens SINUMERIK HMI OP010 Terminal Keypad HMI Case Repair	In Stock
6FC5203-0AF00-0AA1	Siemens OP010 Membrane Switch Housing Replacement	Available Now
6FC5203-0AF00-0AA3	Siemens SINUMERIK Plastic Case Operator Keyboard Repair	In Stock
6FC5203-0AF01-0AA0	Siemens OP010 Keypad Membrane HMI Cover Replacement	In Stock
6FC5203-0AF11-1AA0	Siemens OP010 HMI Case Membrane Keypad Switch Repair	Available Now
6FC5203-0AF11-2AA0	Siemens SINUMERIK Keyboard Membrane Housing Replacement	In Stock
6FC5203-0AF12-0AA1	Siemens SINUMERIK OP010 Terminal Keypad Plastic Cover Repair	Available Now
6FC5248-0AF00-0AA0	Siemens OP010 Housing Switch Membrane Repair	Available Now
6FC5248-0AF00-0AA2	SINUMERIK OP010 Membrane Keypad Plastic Case Replacement	In Stock
Siemens OP010 Part No.	Description	Inventory status