HMI06BE HMI06GE HMI06CE Touch Screen Monitor Protective Film Repair
- Model
- HMI06BE HMI06GE HMI06CE
Item specifics
- Product Line
- Cutler-Hammer Panelmate
- Warranty
- 1 Year
- Shipping Time
- 3-5 Days
- Supply Parts
- Front Overlay Touch Screen Panel
- Environment
- Free From Corrosive Gases
- LCD Size
- 6''
Review
Description
Eaton HMI06BE HMI06GE HMI06CE Touch Screen Display Front Overlay Replacement
Order each part separately is available
After purchasing Cutler Hammer Panels HMI06BE HMI06GE HMI06CE Front Overlay Touch Membrane from Vicpas, the damaged component must be removed before installing the new one. During the replacement process, please handle all small parts and packaging materials with care to prevent any electrically conductive materials (such as nuts, washers, or metal filings) from entering the unit through openings in the card cage, as this may cause damage to the processor board. If the newly installed Eaton Panelmate HMI06BE HMI06GE HMI06CE Touch Screen Glass Protective Film does not function properly, we recommend contacting Vicpas first to confirm whether the issue is related to the touchscreen. If the touchscreen is not the cause, the problem may be due to internal damage within the device, in which case the unit should be inspected and serviced by qualified professionals. Vicpas offers high-quality Eaton Cutler Hammer HMI06BE HMI06GE HMI06CE Front Overlay Touch Screen Panel, with worldwide shipping and a one-year warranty for reliable long-term use.
Specifications:
The table below describes the parameters of Eaton HMI06BE HMI06GE HMI06CE Protective Film Touch Screen Monitor.
| Warranty: | 365 Days |
| Cooling Method: | Natural Air Cooling |
| Shipping Time: | 3-5 Days |
| Size: | 6'' |
| Brand: | Vicpas |
| Product Line: | Cutler-Hammer Panelmate |
| Environment: | Free From Corrosive Gases |
| Operating Temperature: | 0 °C ... +50 °C |
| Relative Humidity: | 95% |
| Storage Temperature: | -20 °C ... +60 °C |
Related Eaton Cutler-Hammer Panelmate Part No. :
| Cutler-Hammer Panelmate HMI | Description | Inventory status |
| Cutler-Hammer Panelmate HMI | Description | Inventory status |
Eaton Cutler-Hammer Panelmate Manuals PDF Download:
FAQ:
Question: What is important when reinstalling the PanelMate unit after replacing HMI06BE HMI06GE HMI06CE Front Overlay Touch Digitizer Glass?
Answer: After replacing a damaged touchscreen or membrane keypad, proper installation is important to ensure reliable sealing and stable operation. When tightening the mounting nuts, avoid both under-tightening and over-tightening. The fasteners should be tightened enough to create a proper seal, but excessive force may strip the threads or damage the gasket. For best installation results, using a torque wrench is recommended when reinstalling the PanelMate unit.
Question: How can I adjust the display contrast on the PanelMate unit?
Answer: Units with grayscale or dual-scan color displays support software-controlled contrast adjustment. To adjust the contrast, place the unit in Run Mode, then go to Get Page → More → Setup Page → Adjust Contrast. Use the Lighter and Darker control buttons to achieve the desired display effect. After adjustment, press Save Setting to keep the new contrast level, or press Cancel to return to the previous setting. The unit will restore the last saved contrast setting after power cycling.
Common misspellings:
HMI006BEHMI0BE
HMI06B1E
HMIO6GE
HMI106GE
HMI06EG
HMI66CE
HMI060CE
HMI0CE
