P30GAP90300F3G0xxx P30GAP90300F3G8xxx P30GAP90300F3G0XXX-02S3C314000 Front Overlay Touch Membrane
- Model
- P30GAP90300F3G0xxx P30GAP90300F3G8xxx P30GAP90300F3G0XXX-02S3C314000
Item specifics
- Brand
- Lenze
- Warranty
- 365 Days
- Product Line
- LENZE Controller P300 Series
- Supply
- Touch Screen Monitor Protective Film LCD Screen
- Shipping
- 2-4 workdays
- Part Number
- P30GAP90300F3G0xxx
- Part Number
- P30GAP90300F3G8xxx
- Part Number
- P30GAP90300F3G0XXX-02S3C314000
Review
Description
Lenze P300 P30GAP90300F3G0xxx P30GAP90300F3G8xxx P30GAP90300F3G0XXX-02S3C314000 LCD Display Touch Screen Front Overlay Repair
Order each part separately is available
P30GAP90300F3G0xxx P30GAP90300F3G8xxx P30GAP90300F3G0XXX-02S3C314000 LCD Display Screen Touch Membrane Front Overlay Controller P300 maintenance and servicing
• The Lenze drive and automation components are maintenance-free. Nonetheless, you have to carry out a visual inspection at regular and sufficiently short intervals considering the ambient conditions.
Check the following:
• Does the environment still meet the operating conditions specified in the "Technical data" chapter of the product catalogue?
• Is the heat dissipation impeded by dust or dirt?
• Are the mechanical and electrical connections still okay?
• If the ambient air is polluted, the cooling surfaces may become dirty or the air vents may be obstructed.
Therefore, clean the cooling surfaces and air vents periodically under these operating conditions. Do not use sharp or pointed tools for this purpose!
• Heatsinks get very hot during operation.
Before working on the P30GAP90300F3G0xxx P30GAP90300F3G8xxx P30GAP90300F3G0XXX-02S3C314000 Protective Film LCD Display Panel HMI Touch Glas Controller P300 devices, check the heatsink temperature.
Flammable material or substances must not be placed near the heatsink or get to it.
• After disconnecting the system from the supply voltage, do not touch live device parts and power terminals immediately because capacitors may be charged.
Observe the corresponding information plates on the P30GAP90300F3G0xxx P30GAP90300F3G8xxx P30GAP90300F3G0XXX-02S3C314000 Front Overlay Touch Screen Panel Controller P300 LCD Display device.
Specifications:
The table below describes the parameters of the LENZE Controller P300 Series P30GAP90300F3G0xxx P30GAP90300F3G8xxx P30GAP90300F3G0XXX-02S3C314000 Panel Glass Front Overlay LCD Screen HMI Parts.
| Brand: | Lenze |
| Display Version: | STN/TFT |
| Product Line: | LENZE Controller P300 Series |
| Resolution: | 640x480 pixels |
| Warranty: | 12 Months Warranty |
| No. of Colours: | 64k |
| Power Supply: | 24 V DC |
| Storage Temperature: | -20 °C ~ +60 °C |
| Touchscreen: | Resistiv |
| Touch Size: | 7" |
Related LENZE Controller P300 Series HMI Part No. :
| LENZE Controller P300 | Description | Inventory status |
| P30GAP40300F3G*XXX-02S3*31*000 | LENZE Controller P300 Touch Screen Glass Protective Film LCD Screen | In Stock |
| P30GAP40300F3G0xxx | LENZE Controller P300 Series Front Overlay Touch Screen Panel LCD Display | Available Now |
| P30GAP40300F3G0XXX-02S3C314101 | LENZE Controller P300 Series Protective Film Touch Panel LCD Screen | In Stock |
| P30GAP40300F3G0XXX-02S3D315000 | LENZE P300 Series HMI Touch Glass Front Overlay LCD Display Screen | Available Now |
| P30GAP40300F3G8xxx | LENZE Controller P300 Series Touch Screen Panel Front Overlay LCD Display | In Stock |
| P30GAP80300F3G*XXX-02S3*31*000 | LENZE Controller P300 Protective Film Touch Membrane LCD Display Panel | In Stock |
| P30GAP80300F3G0xxx | LENZE Controller P300 Series Front Overlay Touch Glass LCD Display Screen | In Stock |
| P30GAP80300F3G8xxx | LENZE P300 Touch Digitizer Glass Protective Film LCD Display Panel | Available Now |
| P30GAP80300F3GXXX-02S3C314000 | LENZE P300 Series Front Overlay Touch Digitizer Glass LCD Display | Available Now |
| P30GAP90300F3G0xxx | LENZE Controller P300 Protective Film Touch Screen Monitor LCD Screen | In Stock |
| P30GAP90300F3G0XXX-02S3C314000 | LENZE P300 Series MMI Touch Screen Front Overlay LCD Display Screen | In Stock |
| P30GAP90300F3G0XXX-02S3C314102 | LENZE Controller P300 HMI Touch Screen Protective Film LCD Display Panel | In Stock |
| P30GAP90300F3G0XXX-02S3D315000 | LENZE Controller P300 Series Front Overlay Touch Screen Panel LCD Screen | In Stock |
| P30GAP90300F3G8xxx | LENZE Controller P300 Series Protective Film HMI Panel Glass LCD Display | Available Now |
| Controller P300 Series | Description | Inventory status |
Lenze Controller P300 Series Manuals PDF Download:
FAQ:
Question: What are the benefits of using Lenze Controller P300?
Answer: The benefits of using Lenze Controller P300 include improved efficiency, precise control of machines and processes, and easy integration into existing production systems.
Question: What industries can benefit from using Lenze Controller P300?
Answer: Lenze Controller P300 can benefit a wide range of industries, including automotive, food and beverage, packaging, and more.
Question: How to remove the connected controller?
Answer:
1. Switch off the voltage supply of the entire system and the Controller.
2. Remove the supply connections, bus connections and all other connections from the Controller.
3. When an I/O system 1000 (EPM-Sxxx) is connected to the Controller: Remove the first electronic module of the I/O system.
4. Dismount the Controller.
5. Remove the SD card from the card slot.
Common misspellings:
P30GAP90300F3G0xxx P30GAP90300F3G8xxx P30GAP903003G0XXX-02S3C314000P30GAP90300F3G0xxx P30AP90300F3G8xxx P30GAP90300F3G0XXX-02S3C314000
P30GAP90300G0F3xxx P30GAP90300F3G8xxx P30GAP90300F3G0XXX-02S3C314000
P3oGAP90300F3G0xxx P30GAP90300F3G8xxx P30GAP90300F3G0XXX-02S3C314000
P30GAP90300F3G0xxx P30GAP90300F3G8xxx P30GAPP90300F3G0XXX-02S3C314000
