P50GAP40x00CxxxXXX P50GAP40x00CxxxXXX-0xxxxxxxxxx Protective Film Touch Screen Panel
P50GAP40x00CxxxXXX P50GAP40x00CxxxXXX-0xxxxxxxxxx Protective Film Touch Screen Panel
Model
P50GAP40x00CxxxXXX P50GAP40x00CxxxXXX-0xxxxxxxxxx

Item specifics

Brand
Lenze
Warranty
365 Days
Product Line
LENZE Controller P500 Series
Supply
LENZE Controller P500 Touch Panel Protective Film
Part Number
P50GAP40x00CxxxXXX
Part Number
P50GAP40x00CxxxXXX-0xxxxxxxxxx
Shipping
2-4 workdays

Review

Description

LENZE P50GAP40x00CxxxXXX P50GAP40x00CxxxXXX-0xxxxxxxxxx Touch Digitizer Glass Protective Film Repair


LENZE Controller P500 Series P50GAP40x00CxxxXXX P50GAP40x00CxxxXXX-0xxxxxxxxxx Touch Screen Front Overlay Repair Replacement

VICPAS supplies LENZE Controller P500 Series P50GAP40x00CxxxXXX P50GAP40x00CxxxXXX-0xxxxxxxxxx Protective Film and Touch Panel with 365 days warranty and support Urgent Worldwide Shipping.


P50GAP40x00CxxxXXX P50GAP40x00CxxxXXX-0xxxxxxxxxx Protective Film Touch Membrane Controller P500 Mechanical installation
• Install the Lenze drive and automation components according to the instructions given in the corresponding documentation.
Select the mounting location so that the "Operating conditions" in the "Technical data" chapter of the product catalog are guaranteed.
• In the installation space, continuous and sufficient air circulation is absolutely required to dissipate the heat of the P50GAP40x00CxxxXXX P50GAP40x00CxxxXXX-0xxxxxxxxxx Touch Digitizer Front Overlay Lenze Controller P500 device. The ventilation slots must not be covered.
• Provide for careful handling and avoid mechanical overload. During handling neither bend components, nor change the insulation distances.
• The P50GAP40x00CxxxXXX P50GAP40x00CxxxXXX-0xxxxxxxxxx Touch Digitizer Protective Film Controller P500 devices contain electrostatic sensitive devices that can be easily damaged by short circuit or static discharge (ESD). Thus, only touch electronic components and contacts if ESD measures were taken before.




Specifications:

The table below describes the parameters of the LENZE Controller P500 Series P50GAP40x00CxxxXXX P50GAP40x00CxxxXXX-0xxxxxxxxxx Touch Panel Protective Film HMI Parts.

Backlight: LED
Display Resolution: 800x600 pixels
Display Size: 10.4 inch
Product Line: LENZE Controller P500 Series
Touchscreen: Resistiv
Brand: Lenze
Power Consumption: 12.0 W
Power Supply: +24 VDC, (+18 ... 32 VDC)
Storage Temperature: -20 °C ~ +60 °C
Warranty: 365 Days


Related LENZE Controller P500 Series HMI Part No. :

LENZE Controller P500 Description Inventory status
P50GAP40300C4G0XXX LENZE Controller P500 Series Touch Screen Glass Protective Film In Stock
P50GAP40300C4G0XXX-02S14015000 LENZE Controller P500 Series Front Overlay Touch Screen Panel Repair Available Now
P50GAP40300C4G9XXX LENZE Controller P500 Series Protective Film Touch Panel Repair In Stock
P50GAP40x00CxxxXXX LENZE Controller P500 Series HMI Touch Glass Front Overlay Replacement Available Now
P50GAP40x00CxxxXXX-0xxxxxxxxxx LENZE Controller P500 Series Touch Screen Panel Front Overlay Repair In Stock
P50GAP40x00MxxxXXX LENZE Controller P500 Series HMI Protective Film Touch Membrane In Stock
P50GAP40x00MxxxXXX-0xxxxxxxxxx LENZE Controller P500 Series Front Overlay Touch Glass Repair In Stock
P50GAP60x00CxxxXXX LENZE Controller P500 Series Touch Digitizer Glass Protective Film Available Now
P50GAP60x00CxxxXXX-0xxxxxxxxxx LENZE Controller P500 Series Front Overlay Touch Digitizer Glass Available Now
P50GAP60x00MxxxXXX LENZE Controller P500 Series Protective Film Touch Screen Monitor In Stock
P50GAP60x00MxxxXXX-0xxxxxxxxxx LENZE Controller P500 Series MMI Touch Screen Front Overlay Replacement In Stock
Controller P500 Series Description Inventory status


Lenze Controller P500 Series Manuals PDF Download:

  • Controller__Parameter setting and configuration__v4-0__EN
  • DoC controller p500__2473827.00__EN
  • EtherCAT__Controller-based Automation__v9-0__EN
  • P50GAP_P50GAH__Panel Controller HMI p500__v8-0__DE_EN
  • Panel Controllers p300 and p500__v1-0__EN

  • FAQ:

    Question: How to connect a new Controller?

    Answer:
    1. Insert the SD card of the removed Controller into the new one.
    2. Mount the new Controller.
    3. Optional: Mount and connect the electronic module of the I/O system 1000 (EPM-Sxxx).
    4. Connect supply connections, bus connections and all other connections to the Controller.
    5. Switch on voltage supply.
    The Controller starts the automatic update:
    • The data of the SD card of the defective Controller such as an executable boot project and a visualisation are reused in the replacement device. Thus, a quick commissioning is possible.
    • The progress of the update process can be followed in the logbook of the Controller and is also indicated by the Status LEDs of the Controllers
    How to connect a new Controller?


    Question: How to create control elements?

    Answer:
    1. In the Project Explorer double-click an existing form in the Design folder.
    The "FCentral" form is created for a new project.
    2. Open the tool box using the View→Tool box menu command or via the tab on the right of the screen.
    3. Move the desired control elements using the Tool box via drag&drop to the desired position in the workspace.

    Common misspellings: 

    P50GAP40x00CxxxXXX P50GP40x00CxxxXXX-0xxxxxxxxxx
    50GAP40x00CxxxXXX P50GAP40x00CxxxXXX-0xxxxxxxxxx
    P50GAP40x00CxxxXXX 5P0GAP40x00CxxxXXX-0xxxxxxxxxx
    P50GAP40x00CxxxXXX P5oGAP40x00CxxxXXX-0xxxxxxxxxx
    P50GAP40x00CxxxXXX P50GAP40x00CxxxXXXX-0xxxxxxxxxx