P50GAP40x00MxxxXXX P50GAP40x00MxxxXXX-0xxxxxxxxxx Touch Digitizer Glass Front Overlay
P50GAP40x00MxxxXXX P50GAP40x00MxxxXXX-0xxxxxxxxxx Touch Digitizer Glass Front Overlay
Model
P50GAP40x00MxxxXXX P50GAP40x00MxxxXXX-0xxxxxxxxxx

Item specifics

Brand
Lenze
Warranty
365 Days
Product Line
LENZE Controller P500 Series
Supply
Touch Screen Monitor Protective Film
Shipping
2-4 workdays
Part Number
P50GAP40x00MxxxXXX
Part Number
P50GAP40x00MxxxXXX-0xxxxxxxxxx

Review

Description

P50GAP40x00MxxxXXX P50GAP40x00MxxxXXX-0xxxxxxxxxx Touch Screen Front Overlay


LENZE Controller P500 Series P50GAP40x00MxxxXXX P50GAP40x00MxxxXXX-0xxxxxxxxxx Touch Screen Protective Film Repair Replacement

P50GAP40x00MxxxXXX P50GAP40x00MxxxXXX-0xxxxxxxxxx Front Overlay Touch Membrane Controller P500 maintenance and servicing


• The Lenze drive and automation components are maintenance-free. Nonetheless, you have to carry out a visual inspection at regular and sufficiently short intervals considering the ambient conditions.
Check the following:
• Does the environment still meet the operating conditions specified in the "Technical data" chapter of the product catalogue?
• Is the heat dissipation impeded by dust or dirt?
• Are the mechanical and electrical connections still okay?
• If the ambient air is polluted, the cooling surfaces may become dirty or the air vents may be obstructed.
Therefore, clean the cooling surfaces and air vents periodically under these operating conditions. Do not use sharp or pointed tools for this purpose!
• Heatsinks get very hot during operation.
Before working on the P50GAP40x00MxxxXXX P50GAP40x00MxxxXXX-0xxxxxxxxxx HMI Touch Glass Protective Film Controller P500 devices, check the heatsink temperature.
Flammable material or substances must not be placed near the heatsink or get to it.
• After disconnecting the system from the supply voltage, do not touch live device parts and power terminals immediately because capacitors may be charged.
Observe the corresponding information plates on the P50GAP40x00MxxxXXX P50GAP40x00MxxxXXX-0xxxxxxxxxx Touch Screen Panel Front Overlay Controller P500 device.




Specifications:

The table below describes the parameters of the LENZE Controller P500 Series P50GAP40x00MxxxXXX P50GAP40x00MxxxXXX-0xxxxxxxxxx Front Overlay Panel Glass HMI Parts.

Brand: Lenze
Display Version: STN/TFT
Product Line: LENZE Controller P500 Series
Resolution: 800x600 pixels
Warranty: 12 Months Warranty
No. of Colours: 64k
Touchscreen: Resistiv
Power Supply: 24 V DC
Storage Temperature: -20 °C ~ +60 °C
Touch Size: 10.4"


Related LENZE Controller P500 Series HMI Part No. :

LENZE Controller P500 Description Inventory status
P50GAP40300C4G0XXX LENZE Controller P500 Series Touch Screen Glass Protective Film In Stock
P50GAP40300C4G0XXX-02S14015000 LENZE Controller P500 Series Front Overlay Touch Screen Panel Repair Available Now
P50GAP40300C4G9XXX LENZE Controller P500 Series Protective Film Touch Panel Repair In Stock
P50GAP40x00CxxxXXX LENZE Controller P500 Series HMI Touch Glass Front Overlay Replacement Available Now
P50GAP40x00CxxxXXX-0xxxxxxxxxx LENZE Controller P500 Series Touch Screen Panel Front Overlay Repair In Stock
P50GAP40x00MxxxXXX LENZE Controller P500 Series HMI Protective Film Touch Membrane In Stock
P50GAP40x00MxxxXXX-0xxxxxxxxxx LENZE Controller P500 Series Front Overlay Touch Glass Repair In Stock
P50GAP60x00CxxxXXX LENZE Controller P500 Series Touch Digitizer Glass Protective Film Available Now
P50GAP60x00CxxxXXX-0xxxxxxxxxx LENZE Controller P500 Series Front Overlay Touch Digitizer Glass Available Now
P50GAP60x00MxxxXXX LENZE Controller P500 Series Protective Film Touch Screen Monitor In Stock
P50GAP60x00MxxxXXX-0xxxxxxxxxx LENZE Controller P500 Series MMI Touch Screen Front Overlay Replacement In Stock
Controller P500 Series Description Inventory status


Lenze Controller P500 Series Manuals PDF Download:

  • Controller__Parameter setting and configuration__v4-0__EN
  • DoC controller p500__2473827.00__EN
  • EtherCAT__Controller-based Automation__v9-0__EN
  • P50GAP_P50GAH__Panel Controller HMI p500__v8-0__DE_EN
  • Panel Controllers p300 and p500__v1-0__EN

  • FAQ:

    Question: How to remove the connected controller?

    Answer:
    How to remove the connected controller?
    1. Switch off the voltage supply of the entire system and the Controller.
    2. Remove the supply connections, bus connections and all other connections from the Controller.
    3. When an I/O system 1000 (EPM-Sxxx) is connected to the Controller: Remove the first electronic module of the I/O system.
    4. Dismount the Controller.
    5. Remove the SD card from the card slot.

    Common misspellings: 

    P50GAP40x00MxxxXXX P50GAP40x00MxxxXXX-0xxxxxxxxx
    P50GAP40x00MxxxXXX P50GAP40x00xxxXXX-0xxxxxxxxxx
    P50GAP400x0MxxxXXX P50GAP40x00MxxxXXX-0xxxxxxxxxx
    P50GAP40x00MxxxXXX P5oGAP40x00MxxxXXX-0xxxxxxxxxx
    P50GAP40x00MxxxXXX P50GAP40x00MxxxXXX--0xxxxxxxxxx