FPM-120-TS FPM-170-TS Protective Film Touch Glass HMI

Order each part separately is available

VICPAS supply Automation Direct FPM-120-TS FPM-170-TS Protective Film and Touch Panel with 365 days warranty and support Urgent Worldwide Shipping.

The Automation Direct FPM-120-TS FPM-170-TS Touch Membrane Front Overlay interface to the PC is RS-232, so the recommend maximum distance from the PC is 50 feet., The driver and and interface have been tested to 50 Ft. using high quality cables. High quaility cables and connectors are important, especially if field connections are made. Poor quality cables will drastically reduce the performance of the RS-232 interface. The touch driver default baud rate is 9600. The Automation Direct FPM-120-TS FPM-170-TS Front Overlay Touch Screen itself is connected to electronics [internal to the display unit] that provide the Analog to Digital conversion. When the screen is touched, the electronics convert the analog voltage to a digital value and add a "Mouse Click". This touch data is sent out from the display serial port to the PC serial port where the touch driver presents the data to the operating systems as if it were from a normal PC mouse. When the touch is released the new XY location is sent along with a "Mouse Up Click".

FPM-170-TS Touch Digitizer Glass Protective Film Display Features
􀂧 The FPM-170-TS is capable of displaying 16M (24 Bit) colors in a continuous spectrum. The high-contrast LCD enhances the image with no geometric distortion.
􀂧 FPM-170-TS Series directly accepts an analog 5-wire RGB with separate H/V (Horizontal / Vertical) sync. This is the standard PC video signal. The FPM-170(-TS) Series is auto synchronous, adjusting the display to the appropriate input between VGA and SXGA.
􀂧 The FPM-170-TS Series is supplied with an Anti-Glare Touch Screen [TS models] or an Anti-Glare impact window on non-touchscreen models.
􀂧 The FPM-170-TS Series has an integrated 115/220VAC power supply as standard on all models.