6FC5247-0AA24-0AA1 Siemens SINUMERIK OP010FS Membrane Keypad
6FC5247-0AA24-0AA1 Siemens SINUMERIK OP010FS Membrane Keypad
6FC5247-0AA24-0AA1 Siemens SINUMERIK OP010FS Membrane Keypad
Model
6FC5247-0AA24-0AA1

Item specifics

Brand
Siemens
Warranty
6 Months
Product Line
Siemens OP010FS Operator Panel
Supply
Sinumer HMI OP010FS Membrane Keyboard Plastic Case
width
444.5mm
height
289mm
model
6FC5247-0AA24-0AA1

Review

Description

6FC5247-0AA24-0AA1 Siemens SINUMERIK HMI OP010FS OPERATOR PANEL Terminal Keypad and HMI Case Cover Repair Replacement


6FC5 247-0AA24-0AA1 Siemens SINUMERIK HMI OP010FS OPERATOR PANEL Plastic Shell and 
Membrane Keypad Repair Replacement


Warning
• Do not touch live units or terminals. Otherwise electric shock or malfunction could result.
• Do not touch any current-carrying parts of 6FC5 247-0AA24-0AA1 Operator Keyboard Housing even if you have shut off power to them, until at least 5 minutes have passed (to let any residual change go out). Otherwise electric shock or malfunction could result.
• Take care not to damage, pull on, or pinch the cables of 6FC52470AA240AA1 Plastic Shell Membrane Keyboard Keypad. Otherwise electric shock could result.
• Do not touch any rotating parts of 6FC5247-0AA24-0AA1 before you shut off power to them. Otherwise injury could result.
• Never attempt to modify the product Otherwise electric shock, a fire, or damage could result.
• Close the upper and lower covers before switching on the input power of 6FC5247-0AA24-0AA1 Switch Membrane Housing. Otherwise electric shock could result.
• Provide an additional emergency stop button outside the product. This is a necessary safety precaution.

Caution
• Ensure that the environmental requirements of 6FC5 247-0AA24-0AA1 Plastic Cover Terminal Keypad are fully met. A fire, electric shock, or malfunction could result if the product were operated in excessively hot, humid, dusty, corrosive, vibration-, or shock-ridden conditions.
• The environmental requirements of 6FC52470AA240AA1 are these:
-The atmosphere must be free of corrosive gas or vapor.
-There must be no risk of being splashed with machining oil or organic solvent.
-The relative humidity must be between10 and 90%with no dew.
-The ambient temperature around the control panes of 6FC5247-0AA24-0AA1 must be between 5 and 30C. The control panels must be protected from freezing, direct sunlight, heat sources, or the elements.
-Floor vibration of 6FC5 247-0AA24-0AA1 Housing Membrane Keypad Switch must not be more than 4.9m/s-.
• Take care so that no wire chips or other foreign matter would enter the product. Otherwise a fire, damage, or malfunction could result.
• When using the programming functions of 6FC52470AA240AA1 Operator Keyboard Plastic Cover, always follow the instructions given in the relevant manuals. Otherwise injury or malfunction could result.




Specifications:

The table below describes the parameters of the 6FC5 247-0AA24-0AA1 Siemens OP010FS HMI Parts.

Interface: Front USB interface
Combination: TCU or PCU
Key Level: Second
Temperature: Overtemperature
Part Number: 6FC5247-0AA24-0AA1
Height Units: 7 HU
Mounting Format: 19''
Attachment: Tension Jacks
Interface: Front USB
Protection: IP 54


Related Simatic OP010FS Part No. :

SINUMERIK OP010FS Keypad Description Inventory status
6FC5203-0AF10-1AA0 Siemens SINUMERIK HMI OP010FS Terminal Keypad Housing Repair In Stock
6FC5203-0AF10-2AA0 Siemens OP010FS HMI Case Membrane Switch Replacement Available Now
6FC5203-0AF10-2AA1 Siemens SINUMERIK Operator Keyboard Shell Cover Repair In Stock
6FC5247-0AA24-0AA1 Siemens OP010FS Keypad Membrane HMI Cover Replacement In Stock
6FC5247-0AA25-1AA0 Siemens OP010FS Housing Membrane Keypad Switch Repair Available Now
6FC5248-0AF11-0AA0 Siemens SINUMERIK Keyboard Membrane Plastic Case Replacement In Stock
Siemens OP010FS Part No. Description Inventory status


Siemens OP010FS series HMI Manuals PDF Download:


FAQ:

Question: What is the common operating screen of 6FC5247-0AA24-0AA1?

Answer:
Common operating area is provided for Yaskawa Siemens CNC.
Two different screens in common operating area are as follows.
• All position screen to display the five different types of position data.
• Run time display screen to display five different types of timer relating to run operation.


Question: What is the basic display of 6FC5 247-0AA24-0AA1?

Answer:
• Number of variables in Macro variable screen is 26. (as 2 column x 13 lines.)
• "INS"is displayed in insert mode at the bottom right hand corner in the window.
• "EDT"is displayed in entering values at the bottom right hand corner in the window.

Common misspellings: 

FC5247-0AA24-0AA1
6FC547-0AA24-0AA1
6FC5247--0AA24-0AA1
6FC5247-0AA24-0AAA1
6FC5247-0AA24-0A1A