CP6909-0001-0000 Protective Film Touch Screen Monitor LCD Screen

Order each part separately is available

Proceed as follows to attach Beckhoff HMI CP6909-0001-0000 Protective Film to the touch screen LCD display:
1. Ensure that the environment is as dust-free as possible.
2. Thoroughly clean the surface of CP6909-0001-0000 LCD Screen Touch Panel to be fitted with the film and remove all grease residues.
3. Detach the film from the backing at the short edge and place it on the surface.
4. Gradually remove the film from the backing. At the same time, use a doctor blade or other object with a soft rubber or felt edge to apply the film.
5. Brush away air bubbles towards the edge with a doctor blade or other object with a soft rubber or felt edge.
Beckhoff Touch Panel CP6909-0001-0000 Front Overlay is now fitted. You can use the Dimming, Screensaver and Cleaning mode functions with the Display Control Tool.

Proceed as follows to unpack Beckhoff Touch Screen CP6909-0001-0000 Touch Screen Tablet Protective Film LCD Screen:
1. Check the packaging for transport damage.
2. Remove packaging.
3. Keep the packaging for possible future transport.
4. Check your delivery for completeness by comparing it with your order.
5. Check the contents for visible shipping damage.
6. In case of discrepancies between the package contents and the order, or in case of transport damage, please inform Vicpas.