MMI7043P-V2 Touchpad LCD Screen Housing Protective Film Repair

Order each part separately is available

Precautions on Install

Do not install HMI Weinview MMI7043P-V2 Front Overlay, HMI Touch Glass, Case Cover, Gasket, LCD Display, Mounting Brackets, Power Supply Connector and Screws which exceeds allowed temperature. Product can be damaged or shorten the life. Especially Install environment as below should be avoided.
1. Do not Install product to the place which the ambient temperature is out of limits, from 0°C to 50°C or on the surface of control board which high pressure equipment is installed.
2. Do not install MMI-7000 Series MMI7043P-V2 Back Cover, Protective Film, Mounting Brackets, LCD Display, Front Cover, Screws, Gasket, Power Supply Connector and Touch Screen to the place where strong shock or vibration continuously have impacted on product.
3. The space between back of product and back of control board must be more than 100mm for maintenance and ventilation.
4. Do not storage and operate in the place in direct sunlight. By the strong ultraviolet rays can degrade the quality of LCD Displays.
5. Do not strike Weinview HMI MMI7043P-V2 MMI Cover, Protective Film, MMI Panel Screen, Power Supply Connector, Screws, LCD Display, Mounting Brackets and Gasket with a hard or pointed object (such as drill, driver, pen, etc)or press on the touch screen with too much force. It may cause malfunction of the touch panel by damaging front sheet.
6. Do not use or store in a severe vibration environment.
7. Do not allow water, liquids or foreign substances such as metal powder into MMI7043P-V2 Screws, Power Supply Connector, Mounting Brackets, Front Overlay, Front Case, Touch Screen Glass, LCD Display Screen and Back Cover. It can damage products or cause malfunction by an electric shock.