MMI7043P Housing Protective Film LCD Display Touchscreen

Order each part separately is available

Caution During Transportation

While in transit, it is vital to protect the Weinview touch screen MMI7043P Gasket, Protective Film, Touch Screen, LCD Display, Back Cover, Front Cover, Screws, Mounting Brackets and Power Supply Connector from excessive mechanical stress to avoid potential damage. Without adequate packaging, the Weinview HMI MMI7043P Shell Cover, Protective Film, MMI Panel Screen, Power Supply Connector, Screws, LCD Display, Mounting Brackets and Gasket becomes vulnerable to shocks, vibrations, pressure, and moisture, all of which can compromise its integrity. The presence of damaged packaging indicates significant impacts from external conditions on the device. Therefore, it is highly recommended to use the original packaging for both transportation and storage purposes.

Furthermore, if HMI Weinview MMI-7000 Series MMI7043P Touch Membrane Front Overlay is transported in cold weather or exposed to drastic temperature changes, it is crucial to prevent moisture, especially condensation, from accumulating on or inside the device. Moisture can cause short circuits and damage to the device's electrical components. To minimize this risk, store MMI7043P Gasket, Front Overlay, LCD Screen, Screws, Housing, Mounting Brackets, Touch Digitizer Glass and Power Supply Connector in a dry environment. Also, before powering on the device, ensure it has acclimated to room temperature to prevent any potential issues. If condensation is observed, allow the MMI7043P Screws, Power Supply Connector, Mounting Brackets, Front Overlay, Front Case, Touch Screen Glass, LCD Display Screen and Back Cover approximately 12 hours to dry completely before activating it to prevent potential damage.