M2I H TOP Series HTOP05TV-SD Touch Digitizer Overlay
M2I H TOP Series HTOP05TV-SD Touch Digitizer Overlay
M2I H TOP Series HTOP05TV-SD Touch Digitizer Overlay
M2I H TOP Series HTOP05TV-SD Touch Digitizer Overlay
M2I H TOP Series HTOP05TV-SD Touch Digitizer Overlay
M2I H TOP Series HTOP05TV-SD Touch Digitizer Overlay
Model
M2I HTOP05TV-SD

Item specifics

Brand
M2I
Size
5.7 inch
Warranty
365 Days
Product Line
M2I H TOP Series
Supply
HTOP05TV-SD Protective Film Touch Membrane
Shipping
2-4 workdays
Part Number
M2I H TOP Series HTOP05TV-SD

Review

Description

M2I H TOP Series HTOP05TV-SD Front Overlay Touch Membrane Replacement

Order each part separately is available

M2I H TOP Series HTOP05TV-SD Front Overlay HMI Panel Glass Repair Replacement

Screen calibration steps of H TOP Series HTOP05TV-SD Front Overlay Touch Panel

1. Turn the power of HTOP Module off.
2. When the power of TOP Module is on, keep the lower part of the screen is touched.
3. When the HTOP05TV-SD Protective Film HMI Panel screen is turned white color, remove your hand from the screen.
4. Then the screen display "Touch any point for Calibration" and the number is counted down.
5. Touch anywhere on the HTOP05TV-SD HMI Touch Glass screen Front Overlay before changing this number to "0".
6. Along with the message of Calibration Mode, touch the black square is indicated in the middle of the screen.
Continuously touch the HTOP05TV-SD Protective Film Touch Membrane upper left, upper right, lower left and lower right part's black square. When completed, the calibration is completed together with the message of Data Saving.


Specification and exchanging on battery

Turn off the HTOP05TV-SD Touch Digitizer Glass Protective Film product by using a screwdriver, open the battery case of product and exchange the battery. After exchange of battery, please do assemble the M2I HTOP05TV-SD Front Overlay Touch Screen Glass case again. Because rechargeable battery is built in, the internal memory is backed up when the battery is exchanged.




Specifications:

The table below describes the parameters of the M2I HTOP05TV-SD Touchscreen Front Overlay HMI Parts.

Brand: M2I
Operation Temperature: 0°C ~ +50°C
Part Number: HTOP05TV-SD
Display Type: TFT Color
Display Color: 65536 Color
Operating Humidity: 0°C ~ +90°C
Storage Temperature: -10°C ~ +60°C
Warranty: 365 Days
Resolution: 640 x 480 Pixels
Display Area: 115.2 x 86.4 mm


Related M2I HMI Part No. :

M2I HMI Description Inventory status
HTOP05TQ-SD M2I H Top Series Touch Screen Film Front Overlay Replacement In Stock
HTOP05TQ-SD2 M2I H Top Series Protective Film HMI Panel Glass Repair Available Now
HTOP05TQ-SD-W M2I H Top Series Front Overlay Touch Membrane Replacement In Stock
HTOP05TV-SD2 M2I H Top Series Touch Screen Display Front Overlay Replacement In Stock
HTOP05TV-SD-W M2I H Top Series Protective Film HMI Panel Screen Repair Available Now
TOPRW0500WD M2I TOPRW Series Touch Digitizer Front Overlay Replacement In Stock
TOPRW0700WD M2I TOPRW Series Touch Screen Film Protective Film Repair Available Now
TOPRW1000WD M2I TOPRW Series Front Overlay Touch Digitizer Glass Replacement In Stock
M2I HMI Description Inventory status


M2I H TOP Series HMI Manuals PDF Download:

  • Strengthen Customer's Industrial Value
  • M2I Corporation Industrial HMI Touch Panel HW Installation Manual
  • TOPPCVIEW Catalog

  • FAQ:

    Question: What are the environment specifications of HTOP05TV-SD Front Overlay Touch Screen Display?

    Answer:
    What are the environment specifications of HTOP05TV-SD Front Overlay Touch Screen Display?


    Question: What is M2I H TOP Series HTOP05TV-SD Touch Screen and Protective Film HMI parts price?

    Answer: Submit a fast quote, send VICPAS an email for best price.

    Common misspellings: 

    TOP05TV-SD
    HTOP05TVSD
    HTOP05TTV-SD
    HTOP05T-VSD
    HTOP05TVS-D