M2I X TOP Series XTOP05MQ-SD Touch Screen Panel
- Model
- M2I XTOP05MQ-SD
Item specifics
- Brand
- M2I
- Size
- 5.7 inch
- Warranty
- 365 Days
- Product Line
- M2I X TOP Series
- Supply
- XTOP05MQ-SD Touch Panel
- Shipping
- 2-4 workdays
- Part Number
- M2I X TOP Series XTOP05MQ-SD
Review
Description
M2I X TOP Series XTOP05MQ-SD Touch Screen Display Replacement
Fixing
Install clamps with M2I XTOP05MQ-SD Touch Screen Monitor product should be installed as follows to maintain the IP performance of the device.
a.Insert the clamp into the slot of the product.
b.Screw the unit into the XTOP05MQ-SD Touch Membrane panel cut with a screwdriver. If the screw is over tightened, it may cause the front deformation, thus resulting the touch sensor Can't work properly Tighten the screws to a torque of 0.2 N.m.
Setting System Recovery Mode of XTOP05MQ-SD Touch Digitizer Glass
a.If the system fails to boot normally due to a problem during operation, the built-in recovery function can be used to maintain the factory default state. Please note that the built-in project will be deleted when using the recovery mode.
b.After opening the XTOP05MQ-SD Touch Screen Monitor rear cover, you can adjust the setting switch. Keep the "BOOT UP"state when booting normally. If the system is recovering, turn off the power and set it to "RECOVERY".
c.When the recovery of M2I XTOP05MQ-SD HMI Panel Glass is completed, the buzzer sounds, then turn off the power and reset to "BOOT UP" state.
Specifications:
The table below describes the parameters of the M2I XTOP05MQ-SD Touch Panel HMI Parts.
| Warranty: | 365 Days |
| Color: | 16 Level |
| Display Type: | TFT Color |
| Display Resolution: | 320 x 240 Pixels |
| Product Line: | M2I X TOP |
| Storage Temperature: | -10°C ~ +60°C |
| Operation Temperature: | 0°C ~ +50°C |
| Display Area: | 115.2 x 86.4mm |
| Part Number: | XTOP05MQ-SD |
| Ambient Humidity: | 85% RH or less |
Related M2I X TOP Series HMI Part No. :
| M2I X TOP Series | Description | Inventory status |
| XTOP05TQ-FD | M2I X Top Series Protective Film Touch Digitizer Glass Repair | Available Now |
| XTOP05TQ-SD | M2I X Top Series Front Overlay Touch Membrane Replacement | In Stock |
| XTOP08TS-SD | M2I X Top Series HMI Touch Screen Protective Film Repair | Available Now |
| XTOP08TV-SD | M2I X Top Series Touch Screen Display Front Overlay Replacement | In Stock |
| XTOP10TS-SA | M2I X Top Series Protective Film HMI Panel Screen Repair | Available Now |
| XTOP10TS-SD | M2I X Top Series Touchscreen Monitor Front Overlay Replacement | In Stock |
| XTOP10TV-SA | M2I X Top Series Touch Screen Film Protective Film Repair | Available Now |
| XTOP10TV-SD | M2I X Top Series Front Overlay Touch Digitizer Glass Replacement | In Stock |
| XTOP12TS-LA | M2I X Top Series Protective Film Touch Membrane Repair | Available Now |
| XTOP12TS-SA | M2I X Top Series Touch Screen Tablet Front Overlay Replacement | In Stock |
| XTOP12TS-SD | M2I X Top Series Front Overlay Touch Screen Panel Repair | Available Now |
| XTOP12TS-SD-EX | M2I X Top Series Touch Screen Display Protective Film Replacement | In Stock |
| XTOP15TX-SA | M2I X Top Series HMI Touch Glass Front Overlay Repair | In Stock |
| XTOP15TX-SD | M2I X Top Series Protective Film Touch Screen Tablet Replacement | In Stock |
| M2I X TOP Series | Description | Inventory status |
M2I X TOP Series HMI Manuals PDF Download:
FAQ:
Question: What is the case material of M2I XTOP05MQ-SD Touch Panel Terminal?
Answer: The case material is PC(Flameless).
Question: What is the cooling system of X TOP Series XTOP05MQ-SD Touch Membrane Machine?
Answer: The cooling system of XTOP05MQ-SD is natural air circulation.
Question: What is M2I X TOP Series XTOP05MQ-SD Touch Screen HMI parts price?
Answer: Submit a fast quote, send VICPAS an email for best price.
Common misspellings:
TOP05MQ-SDXTOP05MQSD
XOTP05MQ-SD
XTOP05QM-SD
XTOP05MQS-D
