M2I X TOP-E Series XTOP10TV-ED-E Overlay Touch Panel
- Model
- M2I XTOP10TV-ED-E
Item specifics
- Brand
- M2I
- Size
- 10.4 inch
- Warranty
- 365 Days
- Product Line
- M2I X TOP-E Series
- Supply
- XTOP10TV-ED-E Touch Membrane Protective Film
- Shipping
- 2-4 workdays
- Part Number
- M2I X TOP-E Series XTOP10TV-ED-E
Review
Description
M2I X TOP-E Series XTOP10TV-ED-E Protective Film Touch Screen Monitor Replacement
Order each part separately is available
Installation and Panel Cut Size of M2I X TOP-E Series XTOP10TV-ED-E Protective Film HMI Panel Glass
For mounting product to the control panel, it should be recommended following below items. Make a panel cut which XTOP10TV-ED-E Touch Digitizer Front Overlay is mounted and insert product to the panel form the front side. Installation methods should be following by using the supplied installation Clamp 4PCS.
1. Insert the product into the XTOP10TV-ED-E Protective Film Touch Membrane Panel Cut(mounting place). Attach the installation clamps to the installation slot of the product and secure the product to the Panel Cut(mounting place) with screw driver.
2. If the screw is over tightened, it may cause the front deformation, thus resulting the touch sensor can't work properly.
3. Make the Panel Cut (Mounting Size) per each X TOP-E series before install the M2I XTOP10TV-ED-E Touch Screen Display Front Overlay product.
Periodic Check Points
Check the followings periodically for best condition of the XTOP10TV-ED-E Touch Screen Glass Protective Film.
Environment
a.Is the operating temperature within the allowable range (-10C~50C)?
b.Is the operating humidity of XTOP10TV-ED-E Touch Panel Protective Film within the allowable range (10%~80%RH)?
c.Is the Surrounding pollution no corrosive gas?
Power
Is the input voltage within the change range (-15%~+10%)?
Related Items
a.Check the guarantee duration of LCD Backlight of XTOP10TV-ED-E Front Overlay Touch Screen Tablet by eye.
b.Check the touch pad there is no damage, scratch or pollution by eye.
Specifications:
The table below describes the parameters of the M2I XTOP10TV-ED-E Protective Film Touch Membrane HMI Parts.
| Ambient Humidity: | 85% RH or less |
| Operation Temperature: | 0°C ~ +50°C |
| Operating Humidity: | 0~ +90% |
| Thickness: | 1.6~9.0 mm |
| Panel Cut: | 260 x 202 |
| Part Number: | XTOP10TV-ED-E |
| Screen Size: | 10.4'' |
| Warranty: | 365 Days |
| Storage Temperature: | -10°C ~ +60°C |
| Brand: | M2I |
Related M2I HMI Part No. :
| M2I HMI | Description | Inventory status |
| CTOP2M-A | M2I C Top Series Touch Screen Tablet Front Overlay Replacement | In Stock |
| CTOP2M-B | M2I C Top Series Protective Film Touch Panel Glass Repair | Available Now |
| CTOP3M | M2I C Top Series Front Overlay Touch Membrane Replacement | In Stock |
| XTOP05MQ-ED | M2I X Top-E Series HMI Touch Glass Protective Film Repair | Available Now |
| XTOP05MQ-ED-E | M2I X Top-E Series Touch Screen Display Front Overlay Replacement | In Stock |
| XTOP05TQ-ED | M2I X Top-E Series Protective Film HMI Panel Screen Repair | Available Now |
| XTOP05TQ-ED-E | M2I X Top-E Series Touch Digitizer Front Overlay Replacement | In Stock |
| XTOP08TV-ED | M2I X Top-E Series Touch Screen Film Protective Film Repair | Available Now |
| XTOP08TV-ED-E | M2I X Top-E Series Front Overlay Touch Digitizer Glass Replacement | In Stock |
| XTOP10TV-ED | M2I X Top-E Series Protective Film Touch Membrane Repair | Available Now |
| XTOP10TV-ED-E | M2I X Top-E Series Touch Screen Tablet Front Overlay Replacement | In Stock |
| M2I HMI | Description | Inventory status |
M2I X TOP-E Series HMI Manuals PDF Download:
FAQ:
Question: What are the rear part names and specifications of X TOP-E 10 series XTOP10TV-ED-E?
Answer:
Question: How to shift from RUN Mode to Main Menu Mode of XTOP10TV-ED-E?
Answer:
1. Turn the power of X TOP-E Module off.
2. While the power was on and the buzzer was beeped, touch the screen's upper part under the TOP logo on the front sheet.
Note: When turn on the power while pressing the touch, it does not convert into the Menu mode. When the buzzer sound is unable to confirm because of the noise surroundings, the power of touch shall be allowed while continuously press and off on the lower part of the logo.
Common misspellings:
TOP10TV-ED-EXTOP1TV-ED-E
XTOP10TV-E-E
XTOP110TV-ED-E
XTOP10T-VED-E
