PP885A Front Overlay Touch Screen Glass Replacement
PP885A Front Overlay Touch Screen Glass Replacement
PP885A Front Overlay Touch Screen Glass Replacement
PP885A Front Overlay Touch Screen Glass Replacement
PP885A Front Overlay Touch Screen Glass Replacement
PP885A Front Overlay Touch Screen Glass Replacement
Model
PP885A

Item specifics

Warranty
365 Days
Product Line
HMI Panel 800
Types
Front Overlay Touch Panel Glass
Shipping
2-3 workdays
Size
15.4 inches
Part Number
PP885A

Review

Description

HMI Panel 800 PP885A Protective Film Resistive Touch Panel Repair Replacement

Order each part separately is available

PP885A Front Overlay Touch Panel Glass Replacement

VICPAS supply HMI Panel 800 PP885A Touch Screen Panel and Front Overlay with 365 Days warranty and support Urgent Worldwide Shipping.


The PP885A Protective Film Touch Screen Monitor operator panel is designed for stationary installation on a planar surface, where the following conditions are fulfilled:
– no high explosive risks
– no strong magnetic fields
– no direct sunlight
– no large, sudden temperature changes
• Install the PP885A Touch Digitizer Glass Front Film operator panel according to the accompanying installation instructions.
• Ground the operator panel according to the accompanying installation instructions.
• Only qualified personnel may install the operator panel.
• Separate the high voltage, signal and supply cables.
• Make sure that the voltage and polarity of the power source is correct before connecting the operator panel to the power outlet.
• Peripheral equipment must be appropriate for the application and location.
• In a Zone 2 environment, this equipment shall be installed in an enclosure that provides a degree of protection not less than IP 54 or greater than IP 65 in accordance with IEC/EN 600079-0. The IP rating of the equipment is limited to the IP rating of the enclosure it is to be installed into.
• In a Zone 22 environment, this equipment shall be installed in an enclosure that provides a degree of protection not less than IP 64 or greater than IP 65 in accordance with IEC/EN 600079-0. The IP rating of the equipment is limited to the IP rating of the enclosure it is to be installed into.





Specifications:

The table below describes the parameters of the PP885A Front Overlay Touch Membrane HMI Panel 800 Machine.

Part Number: PP885A
NEMA: 4x indoor use only
Active Area Of Display: 331.2 × 207.0 mm
Operating Temperature: -10 °C to +60 °C
Touch Material: Polyester on glass
Display Resolution: 1280 × 800 pixels
Diagonal (inches): 15.4"
Display Type: TFT-LCD
Part Type: New
Warranty: 365 Days


Related HMI Panel 800 Terminals Part No. :

HMI Panel 800 Description Inventory status
PP874 3BSE069271R2 Panel 800 PP874 Front Overlay Touch Membrane In Stock
PP874K 3BSE069273R1 Panel 800 Series PP874K Membrane Keypad Replacement Repair In Stock
PP874M 3BSE069279R1 Panel 800 Series PP874M Touch Digitizer Glass Overlay Repair Available Now
PP875 3BSE092977R1 Panel 800 PP875 HMI Panel Glass Protective Film Replacement Available Now
PP875H 3BSE092983R1 Panel 800 Series PP875H Touch Screen Monitor Front Overlay In Stock
PP875M 3BSE092982R1 Panel 800 Series PP875M Front Overlay MMI Touch Screen In Stock
PP877 3BSE069272R1 Panel 800 Series PP877 HMI Touch Screen Protective Film Available Now
PP877 3BSE069272R2 Panel 800 Series PP877 Protective Film Touchscreen Repair In Stock
PP877K 3BSE069274R1 Panel 800 Series PP877K HMI Membrane Switch Touch Screen Glass Available Now
PP880R 3BSE069295R1 Panel 800 Series PP880R Front Overlay Touch Screen Panel Repair In Stock
PP881 3BSE092978R1 Panel 800 Series PP881 Touch Screen Protective Film Replacement In Stock
PP882 3BSE069275R1 Panel 800 Series PP882 Front Overlay Touch Digitizer Glass Available Now
PP883 3BSE092979R1 Panel 800 PP883 Protective Film HMI Panel Glass Replacement In Stock
Panel 800 Repair Description Inventory status


Systeme Lauer HMI Manuals PDF Download:

  • Panel 800 Version 6 PP885 Hardware and Installation
  • Panel 800 Version 6 PP874M Hardware and Installation
  • Panel 800 Version 6 PP885M Hardware and Installation
  • Panel 800 Version 6 PP885H Hardware and Installation
  • Panel 800 Version 6 PP880R Hardware and Installation
  • Panel 800 Version 6 PP885R Hardware and Installation
  • Panel 800 Version 6 PP886H Hardware and Installation
  • Compact Product Suite Panel 800 Version 6 PP885 Hardware and Installation

  • FAQ:

    Question: What is the price of PP885A Touch Panel Glass and Protective Film?

    Answer: Submit a fast quote, send VICPAS an email for best price.


    Question: What is the size of the PP885A Resistive Touch Screen and Front Overlay?

    Answer: The PP885A Front Overlay Touch Digitizer Glass is 15.4-inch.


    Question: How to install the PP885A Touch Screen Monitor Protective Film operator terminal?

    Answer:

    1. Unpack and check the delivery. If damage is found, notify the supplier.
    PP885ATouch Panel Front Overlay Repair
    2. Disconnect the PP885A operator panel from the power supply.
    3. Remove the plastic cover from the expansion port.
    PP885A Front Overlay Touch Panel Glass Replacement
    4. Secure the expansion module in position, using the provided screws.
    5. Connect the PP885A Front Overlay Touch Digitizer Glass operator panel to the power supply.

    Common misspellings: 

    PP85A
    PP885
    PPBB5A
    PP88A5
    PP8855A