PanelView 5500 2715-T9WD-B Touch Glass Film Replacement
- Model
- 2715-T9WD-B
Item specifics
- Warranty
- 365 Days
- Product Line
- Allen-Bradley PanelView 5500 Repair Kit
- Types
- Protective Film and Touchscreen
- Shipping
- 2-3 workdays
- Size
- 9 inches
- FPC
- 10 wires
Review
Description
Allen-Bradley PanelView 5500 HMI 2715-T9WD-B Touch Screen Glass Front Overlay Repair Replacement
The 2715-T9WD-B Resistive Touch Panel Front Overlay terminals include these features and capabilities:
• Supports a maximum of 50 user-defined screens (the screens will increase in future firmware).
• Supports a maximum of 500 Logix-based alarms (the alarms will increase in future firmware).
• Ethernet communication supporting Device Level Ring (DLR), linear, or star network topologies.
• High-speed human machine interface (HMI) button control and easily configured navigation menu.
The Studio 5000 environment includes these applications:
• View Designer – you can create and design a project for a specific the 2715-T9WD-B Protective Film HMI Touch Screen terminal and download the project to the terminal. You can create an application for any PanelView 5500 terminal and reuse that same application across the entire platform.
• Logix Designer – you can develop control logic for a CompactLogix or ControlLogix controller and download the logic to the controller.
VICPAS supply Allen Bradley PanelView 5500 HMI 2715-T9WD-B Resistive Touch Panel and Overlay
with 365 Days warranty and support Urgent Worldwide Shipping.
Specifications:
The table below describes the parameters of the 2715-T9WD-B PanelView 5500 Parts.
| Part Number: | 2715-T9WD-B |
| View Area(W x H): | 196 x 118 mm |
| Display Resolution: | 800 x 480 WVGA, 5:3 |
| Product Line: | PanelView 5500 |
| Display Size: | 9 inches widescreen |
| Operating Temperature: | 0°C - 55°C |
| Brightness: | 300 cd/m2 (Nits) |
| Input Voltage: | 24V DC nom (18…30V DC) |
| Storage Temperature: | - 25°C - 70°C |
| Status Indicators: | STS (green), ERR (red) |
Related Allen Bradley PanelView 5500 Terminals Part No. :
| PanelView 5500 | Description | Inventory status |
| 2715-T7CA | PanelView 5500 2715-T7CA Touch Panel Front Film Repair | In Stock |
| 2715-T7CA-B | PanelView 5500 2715-T7CA-B Panel Glass Film Repair kit | Available Now |
| 2715-T7CD | 2715-T7CD PanelView 5500 Touch Digitizer Overlay Repair | In Stock |
| 2715-T7CD-B | 2715-T7CD-B PanelView 5500 Touch Overlay Replacement | Available Now |
| 2715-B7CA | PanelView 5500 2715-B7CA Glass Display Keypad Repair | In Stock |
| 2715-B7CA-B | PanelView 5500 2715-B7CA-B Keyboard Display Touch Glass | In Stock |
| 2715-B7CD | 2715-B7CD PanelView 5500 Keypad LCD Display Touch Repair | In Stock |
| 2715-B7CD-B | 2715-B7CD-B PanelView 5500 Touch Digitizer Keyboard Kit | Available Now |
| 2715-T9WA | 2715-T9WA PanelView 5500 Front Overlay Glass Repair | In Stock |
| 2715-T9WA-B | 2715-T9WA-B PanelView 5500 Panel Glass Film Repair Kit | Available Now |
| 2715-T9WD | PanelView 5500 2715-T9WD Touch Overlay Replacement | In Stock |
| 2715-T9WD-B | PanelView 5500 2715-T9WD-B Touch Glass Film Replacement | In Stock |
| PanelView 5500 HMI | Description | Inventory status |
PanelView 5500 HMI Manuals PDF Download:
FAQ:
Question: What do the two indicators on the back of the terminal do?
Answer: The back of the 2715-T9WD-B Overlay Touch Screen terminal has two indicators to identify system status:
• STS indicator (green) indicates that the 2715-T9WD-B Protective Film Touch Digitizer Monitor terminal is on and in use.
• ERR indicator (red) indicates hardware and firmware faults. At startup, the STS and ERR indicators blink on and off, then the STS indicator blinks to signal progress during startup. If the indicators remain off, check the power cable. After a successful startup, the STS indicator remains on.
Question: How to connect the 2715-T9WD-B Protective Film Touch Screen Glass operator terminal to a DC power source?
Answer:
1. Verify that the wiring is not connected to a power source.
2. Strip 7 mm (0.28 in.) of insulation from the ends of the wires.
3.Secure the DC power wires to the marked terminals (+ and –) on the terminal block.
4. Secure the earth ground wire to the GND terminal on the terminal block. The GND terminal must be connected to a low-impedance earth ground.
5. Apply power to the PanelView 5500 HMI 2715-T9WD-B Touch Screen Glass Front Overlay operator terminal.
Common misspellings:
275-T9WD-B
2715-TWD-B
2175-T9WD-B
2715-T9DW-B
27155-T9WD-B
