KAWASAKI 50817-0099 50817-0099L05 50817-0099L10 Repair

Order each part separately is available

This Kawasaki 50817-0099 50817-0099L05 50817-0099L10 Keyboard Membrane Touch Panel LCD Display Enclosure robot is a compound explosion-proof type that is constructed with pressurized mechanism and intrinsically safe construction mechanism. The Kawasaki 50817-0099 50817-0099L05 50817-0099L10 Touch Screen Membrane Keypad LCD Panel Plastic Case robot arm and painting device are explosion-proofed by a built-in pressurizing mechanism that keeps air within the machine at a higher pressure than the paint booth. This stops gases from entering construction parts and prevents any ignition danger at robot arm's motors/encoders (at normal operation), electrical connections, etc.

The explosion-proof robot protects the motor and machine harness in the arm from explosive gases using pressurized air. However, this protection does not extend to the separate harness connecting the arm with the controller. Make sure the separate harness is not directly exposed to a large quantity of solvent, since the solvent may damage cable coatings causing earth faults or short circuits that may lead to a fire. Also, inspect the surface of cable and protecting tube regularly for damage, and replace the separate ham ness every three to five years.

50817-0099 50817-0099L05 50817-0099L10 Keypad Membrane and Plastic Housing:

Purge all explosive gases first before supplying power to equipment in the booth. Install a pressure detection device in the booth that activates automatically if air pressure drops due to error etc. so that the power supply can be cut off immediately (Interlock). Also, power supply must be disabled until the purging is confirmed to be complete, even if the error is cancelled.

VICPAS supply KAWASAKI 50817-0099 50817-0099L05 50817-0099L10 Programming Pendant part to replace, make the teach pendant running. We provide a 1-year warranty of the most product, which include most of touch screen panel, membrane keypad, LCD display and protective case shell housing.