Sigmatek ETT 311 ETT 321 Touch Screen Panel Repair
Sigmatek ETT 311 ETT 321 Touch Screen Panel Repair
Sigmatek ETT 311 ETT 321 Touch Screen Panel Repair
Model
Sigmatek ETT 311 ETT 321

Item specifics

Brand
SIGMATEK
Warranty
365 days
Model
ETT 311 and ETT 321
Parts
Touch Screen Panel Glass
Size
5.7''
Display
TFT color display SXGA, 640 x 480 pixels (VGA)

Review

Description

Einbauterminal SIGMATEK ETT311 ETT321 Touch Screen Glass Front Overlay


Sigmatek Einbauterminal SIGMATEK ETT 311 ETT 321 Touch Screen Glass Protective Film Repair Replacement

The Sigmatek ETT 311 ETT 321 control panel is an intelligent terminal for programming and visualization of automated processes. Process diagnosis as well as operating and monitoring automated procedures is simplified using this ETT 311 ETT 321 Protective Film Touchscreen Panel terminal. A ETT311 ETT321 Front Overlay touch screen serves as the input medium for process data and parameters. A glass touch-screen serves as the input medium for process data and parameters; the output is shown on a 5.7“ VGA TFT color display. With the LSE mask editor, graphics can be created on the PC, then stored and displayed on the terminal. The available interface connections can be used to exchange process data or configure the ETT 311 ETT 321 Front Overlay Touchscreen Panel Glass terminal. A micro-SD card serves as the storage medium for the operating system, application and application data. The integrated, high-performance bus can be used to control I/O modules directly.


VICPAS supply Sigmatek Einbauterminal ETT 311 ETT 321 touchscreen panel with protective film overlay, all of them are brand new with 365 days VICPAS warranty.



Specifications:

The table below describes the parameters of the Sigmatek ETT311 ETT321 Front Overlay Touchscreen Panel.

Part Number : ETT311 ETT321
Product Line: Sigmatek
Screen diagonal 5.7 in
Warranty: 365 Days Warranty
Input Power 24 VDC
Display Type: TFT color
Mounting position: Vertical
Input Type: Touchscreen
Serial interface Type: RS232
Storage -20 to 70°C


Related Sigmatek Panel Part No. :

Einbauterminal Description Inventory status
ETT 311 Sigmatek Einbauterminal Touch Screen Repair In Stock
ETT 321 Einbauterminal Sigmatek Touch Panel Replacement Available Now
ETT 312 Sigmatek Einbauterminal Touchscreen Repair In Stock
ETT 352 Einbauterminal Sigmatek HMI Touch Screen Glass Available Now
ETT 353 Sigmatek Einbauterminal Touch Screen Panel Repair In Stock
ETT 412 Sigmatek Einbauterminal Touch Membrane Repair In Stock
ETT 731 SIGMATEK Einbauterminal HMI Touch Glass Repair In Stock
ETT 771 Sigmatek Einbauterminal Touch Digitizer Glass Repair Available Now
ETT 1561 Sigmatek Einbauterminal HMI Panel Glass Replacement Available Now
ETT 1962 Einbauterminal SIGMATEK Touch Screen Monitor Repair In Stock
SIGMATEK HMI Description Inventory status

SIGMATEK Control Panel Manuals PDF Download:

  • Sigmatek ETT-312 Controller User Manual
  • Sigmatek ETT 312 HMI Panel Datasheet

  • FAQ:

    Question:How to Cleaning SIGMATEK ETT 311 ETT 321 Touch Screen Panel Glass?

    Answer:

    CAUTION!
    Before cleaning the touch screen, the terminal must first be turned off to avoid unin-tentionally triggering functions or commands!

    The SIGMATEK ETT 311 ETT 321 terminal's touch screen can only be cleaned with a soft, damp cloth. To dampen the cloth, a screen-cleaning solution such as an antistatic foam, water with detergent or alcohol should be used. First spray the cleaning fluid on the cloth and not directly on the terminal. The cleaning solution should not be allowed to reach the terminal electronics, for example, through the ventilation slots.


    No erosive cleaning solutions, chemicals, abrasive cleansers or hard objects that can scratch or damage the touch screen may be used.


    If the terminal is soiled with toxic or acidic chemicals, quickly and carefully clean the termi-nal to prevent corrosion.


    To ensure the optimal function of the terminal, the touch screen should be cleaned at regular intervals!

    To extend the lifespan of the touch screen as much as possible, using the fingers to operate the terminal is recommended.


    Question:What are the functions of Sigmatek ETT 311 ETT 321 Touch Protective Foil?

    Answer: To extend the lifespan of the touch screen as must as possible, a protective foil is places of the touch field.
    The foil adds the following properties.
    • High chemical stability
    • Hard surface
    • Splitter protection
    • Easy to clean
    • Matt anti-reflective surface


    Question:What is the price of SIGMATEK ETT 311 ETT 321 Front Overlay and Touch Screen Panel?

    Answer: Submit a quote request, send us an email for our best price.


    Common misspellings: :

    ETT11
    ETT31
    ET3T11
    TET321
    ETT32l
    ETTT321