SIGMATEK ETT 312 ETT 352 ETT 353 Touchscreen Panel
- Model
- SIGMATEK ETT 312 ETT 352 ETT 353
Item specifics
- Touch screen tapes
- Resistance touch screen
- Brand
- SIGMATEK
- Warranty
- 365 days
- Model
- Einbauterminal ETT312 ETT352 ETT353
- Size
- 3.5 inch
Review
Description
SIGMATEK Einbauterminal ETT 312 ETT 352 ETT 353 Front Overlay Touch Screen Glass
Order each part separately is available
The ETT 352 Touch Screen Terminal is an intelligent terminal for the programming and visualization of automated processes. As a room operating device, the ETT352 Touch Panel terminal is equipped with a temperature sensor. A resistive touch screen serves as the input medium for process data and parameters. The output is shown on a 3.5" TFT color display. To save energy, the display is deactivated in sleep mode. When the ETT352 screen surface is touched, the ETT 352 HMI Panel Glass terminal is activated and then deactivated a few minutes after the last input. With the LSE mask editor, graphics can be created on the PC, then stored and displayed on the terminal. Data is exchanged over a CAN bus.
Specifications:
The table below describes the parameters of the Sigmatek ETT 312 ETT 352 ETT 353 Touchscreen Panel Protective Film.
| Part Number : | ETT312/ETT352/ETT353 |
| Product Line: | Sigmatek |
| Screen diagonal | 3.5 in |
| Warranty: | 365 Days Warranty |
| Input Power | 24 VDC |
| Display Type: | TFT color |
| Mounting position: | Vertical |
| Input Type: | Touchscreen |
| Serial interface Type: | RS232 |
| Storage | -20 to 70°C |
Related Sigmatek Panel Part No. :
| Einbauterminal | Description | Inventory status |
| ETT 311 | Sigmatek Einbauterminal Touch Screen Repair | In Stock |
| ETT 321 | Einbauterminal Sigmatek Touch Panel Replacement | Available Now |
| ETT 312 | Sigmatek Einbauterminal Touchscreen Repair | In Stock |
| ETT 352 | Einbauterminal Sigmatek HMI Touch Screen Glass | Available Now |
| ETT 353 | Sigmatek Einbauterminal Touch Screen Panel Repair | In Stock |
| ETT 412 | Sigmatek Einbauterminal Touch Membrane Repair | In Stock |
| ETT 731 | SIGMATEK Einbauterminal HMI Touch Glass Repair | In Stock |
| ETT 771 | Sigmatek Einbauterminal Touch Digitizer Glass Repair | Available Now |
| ETT 1561 | Sigmatek Einbauterminal HMI Panel Glass Replacement | Available Now |
| ETT 1962 | Einbauterminal SIGMATEK Touch Screen Monitor Repair | In Stock |
| SIGMATEK HMI | Description | Inventory status |
SIGMATEK Control Panel Manuals PDF Download:
FAQ:
Question:What are the functions of Sigmatek ETT 312 ETT 352 ETT 353 Touch Protective Foil？
Answer: To extend the lifespan of the touch screen as must as possible, a protective foil is places of the touch field.
The foil adds the following properties.
• High chemical stability
• Hard surface
• Splitter protection
• Easy to clean
• Matt anti-reflective surface
Question:What is the price of SIGMATEK ETT 312 ETT 352 ETT 353 Front Overlay and Touch Screen Panel?
Answer: Submit a quote request, send us an email for our best price.
Question:How to Cleaning SIGMATEK ETT 312 ETT 352 ETT 353 Touch Screen Panel Glass?
Answer:
Before cleaning the touch screen, the terminal must first be turned off to avoid unin-tentionally triggering functions or commands!
The SIGMATEK ETT 312 ETT 352 ETT 353 terminal's touch screen can only be cleaned with a soft, damp cloth. To dampen the cloth, a screen-cleaning solution such as an antistatic foam, water with detergent or alcohol should be used. First spray the cleaning fluid on the cloth and not directly on the terminal. The cleaning solution should not be allowed to reach the terminal electronics, for example, through the ventilation slots.
No erosive cleaning solutions, chemicals, abrasive cleansers or hard objects that can scratch or damage the touch screen may be used.
If the terminal is soiled with toxic or acidic chemicals, quickly and carefully clean the termi-nal to prevent corrosion.
Common misspellings: ：
ETT12
ETT31
ETT312
TET352
ETT35Z
E77353
ETT3353
ETT3553
