UI-8 UI-8-10 Outer Covering Protective Film Membrane Keypad
UI-8 UI-8-10 Outer Covering Protective Film Membrane Keypad
UI-8 UI-8-10 Outer Covering Protective Film Membrane Keypad
UI-8 UI-8-10 Outer Covering Protective Film Membrane Keypad
Model
UI-8 UI-8-10 UI810

Item specifics

Brand
Schneider
Warranty
365 Days
Supply
Andover Controls Plastic Shell
Supply
Andover Controls Front Overlay Keypad
Model
UI-8 UI-8-10 UI810

Review

Description

Andover Controls UI-8 UI-8-10 UI810 Plastic Cover Body Membrane Keyboard Keypad Front Overlay Repair


Andover Controls UI-8 UI-8-10 UI810 Membrane Keyboard Outer Covering Film Repair Kit

Tailored exclusively for Schneider Andover Controls UI-8 UI-8-10 UI810 I/O Module, these replacement operator panel keypads, protective membranes, and plastic enclosures are precision-molded for a perfect fit. Crafted from high-strength industrial-grade plastic, it safeguards the inverter against dust, moisture, and mechanical impact in demanding industrial environments.


With an ergonomic structure and accurate cutouts, the UI-8 UI-8-10 UI810 Plastic Housing, Protective Film, and Keypad Membrane Switches enable quick, tool-friendly installation and easy access to the module’s control interface. Their robust build ensures stable performance, making them ideal for use in industrial automation systems and energy management equipment—where consistent I/O module operation is essential.


Beyond the quality of our UI-8 UI-8-10 UI810 Plastic Shell, Front Overlay, and Terminal Keypad, VICPAS prioritizes seamless service: we offer fast global delivery and knowledgeable technical support, so your team can focus on production while we handle the details of your replacement parts needs.





Specifications:

The table below describes the parameters of the Andover Continuum UI-8 UI-8-10 UI810 Plastic Case Keyboard Membrane Front Overlay HMI Parts.

Brand: Schneider
Power Consumption: 0.7 W @ 10-28VDC max.
Operating Temp.: -10 °C to 50 °C
Storage Temp.: -25 °C to 70 °C
Series: UI-8-10
Switches: Commission, Reset
Operating Position: Vertical
Warranty: 12 months


Related Schneider Andover Continuum Part No. :

Schneider Andover Continuum Description Inventory status
Schneider Andover Controls Description Inventory status


Schneider Andover Continuum HMI Manuals PDF Download:

  • Andover Continuum I/O Modules
  • Andover Continuum I/O Modules Specsheet
  • Andover Continuum I/O System Reference

  • FAQ:

    Question: Do the Andover Continuum UI-8 UI-8-10 UI810 replacement Outer Casing Control Keypad Protective Film come with a warranty?

    Answer: Yes, VICPAS provides a warranty for all replacement parts. If you encounter any issues, please get in touch with our support team for assistance.


    Question: How long does it take to receive the Andover Continuum UI-8 UI-8-10 UI810 HMI Case Operator Keyboard Overlay after placing an order?

    Answer: Standard delivery typically takes 2-4 business days, depending on your location and the selected shipping method. Expedited options may be available upon request.


    Question: How to replacing or adding I/O Modules?

    Answer: There are two ways to replace an I/O module to minimize the potential for long-term harm to any equipment. The procedure that you follow depends upon the exact installation and the circumstances that exist at the time of replacement. Both procedures are described below. In either case, the controlled equipment must be overridden during the process. If no external method of override exists, the equipment will go off.
    Remove all power from the NetController and I/O modules:
    1. Turn power supply off.
    2. Disconnect the batteries.
    3. Replace or add the I/O module.
    4. Turn power supply on.
    5. Reconnect batteries.
    6. Reload NetController
    Remove power to the I/O bus only:
    1. Ensure that batteries are connected and fully charged.
    2. Turn power supply off.
    3. On the CyberStation workstation or Command Terminal Interface, cd to the appropriate controller in the command line: type “set IOUPower = off”. The battery will now only power the CPU and modem (if applicable).
    4. Replace or add the I/O module.
    5. Restore power.
    6. If the NetController version is prior to 1.03, type “set IOUPower = on” in the command line in CyberStation or Command Terminal Interface.


    Common misspellings: 

    U1-8 UI-8-10 UI810
    UI-8 UI-B-10 UI810
    UI-8 UI-8-10 U810
    UI--8 UI-8-11 UI810
    UI-8 UI-8-10 IU810