GT070HE GT070HE-4G GT070HE-WiFi Front Overlay HMI Touch Glass
- Model
- GT070HE GT070HE-4G GT070HE-WiFi
Item specifics
- Warranty
- 365 Days
- Shipping
- 3-5 workdays
- Brand
- Vicpas
- Product Line
- Green loT Series
- Supply Parts
- Protective Film MMI Panel Screen
- Size
- 7''
- Touch Type
- Resistive
Review
Description
Weinview Green loT Series GT070HE GT070HE-4G GT070HE-WiFi Front Overlay Touchscreen Replacement
Order each part separately is available
Precautions
Please observe the following precautions when installing the Weintek Weinview Green loT Series. Failure to comply with these restrictions could result in loss of life, serious personal injury, or GT070HE GT070HE-4G GT070HE-WiFi Touch Screen Monitor Protective Film damage.
1. Do not operate the device in areas subject to explosion due to flammable gases, vapors, or dusts. It will also do harm to GT070HE GT070HE-4G GT070HE-WiFi Touchscreen Front Overlay.
2. Do not connect the unit to an AC power source. You will cause permanent damage to it.
3. Do not attempt to use a DC power supply that does not meet the power requirements. You may cause malfunction or permanent damage.
4. Do not power the HMC with a DC power supply used for inductive loads or for input circuitry to the programmable logic controller. Severe voltage spikes caused by these devices may cause the damage to GT070HE GT070HE-4G GT070HE-WiFi Protective Film Touch Screen Tablet.
5. Care should be taken when locating Weinview HMI GT070HE GT070HE-4G GT070HE-WiFi Front Overlay MMI Panel Screen behind the device to ensure that AC power wiring, PLC output modules, contactors, starters, relay and any other source of electrical interference are located away from the unit. Particular care should be taken to locate variable speed drives and switching power supplies away from the Green loT Series.
Specifications:
The table below describes the parameters of the Weinview Green loT Series GT070HE GT070HE-4G GT070HE-WiFi Touch Digitizer Front Overlay.
| Operating Temperature: | 0 ~ 50°C |
| Protection: | IP65 |
| Cooling Method: | Natural Air Cooling |
| Storage Temperature: | -20 ~ 60°C |
| Display Resolution: | 1024 x 600 Pixels |
| Product Line: | Green loT Series |
| Brand: | Vicpas |
| Display Area: | 154.21(W) x 85.92(H) mm |
| Warranty: | 365 Days |
| Light Transmission: | Above 80% |
Related Weinview HMI No. :
| Weinview HMI | Description | Inventory status |
| GT070E-4G | Green loT Series Touch Screen Film Front Overlay Replacement | In Stock |
| GT070E-WiFi | Green loT Series Front Overlay Touch Digitizer Replacement | Available Now |
| GT070HE | Green loT Series Touch Membrane Protective Film Repair | In Stock |
| GT070HE-4G | Green loT Series Protective Film Touch Panel Repair | Available Now |
| GT070HE-WiFi | Green loT Series HMI Touch Glass Front Overlay Repair | In Stock |
| MMI-1000 | Weinview Front Overlay Touch Screen Glass Replacement | Available Now |
| MMI6056 | Weinview Protective Film Touch Screen Tablet Replacement | In Stock |
| MMI8056 | Weinview Touch Screen Monitor Protective Film Replacement | Available Now |
| MMI-8070-SL-V2 | Weinview Touchscreen Front Overlay Repair | In Stock |
| MMI8070H | Weinview Protective Film Touch Screen Monitor Repair | Available Now |
| MMI8100 | Weinview Front Overlay Touch Screen Display Replacement | In Stock |
| MMI-8100S | Weinview Touchscreen Front Overlay Replacement | Available Now |
| MMI8100SLE | Weinview Touch Digitizer Glass Protective Film Replacement | In Stock |
| MMI-8100-SLEL-V5 | Weinview Front Overlay Touch Screen Film Replacement | Available Now |
| MMI-8100-S-V2 | Weinview Protective Film Touch Screen Panel Replacement | In Stock |
| Weinview HMI | Description | Inventory status |
Weinview HMI Manuals PDF Download:
FAQ:
Question: How can I protect the Weinview GT070HE GT070HE-4G GT070HE-WiFi Touch Screen Film Front Overlay?
Answer:
• Avoid Direct Sunlight: Keep the touch screen out of prolonged exposure to direct sunlight, which can cause overheating and degrade the screen material over time.
• Moisture Protection: Ensure the device is stored in a dry environment. High humidity or condensation can lead to damage, including electrical short circuits and screen malfunction.
Question: What should I pay attention to during mounting the Weinview Green loT Series GT070HE GT070HE-4G GT070HE-WiFi Touch Screen Tablet Protective Film?
Answer:
1. Install the equipment in an environment free from excessive humidity, dust, or extreme temperatures, as these conditions can affect the device's reliability.
2. Provide sufficient ventilation around the device to prevent overheating. Ensure that airflow is not blocked by surrounding objects.
Common misspellings:
GT071HE
GT700HE
GT070EH
GT170HE-4G
GT070HE4G
GT070H0E-4G
GT07HE-WiFi
GT770HE-WiFi
GT070HEWiFi
