HMI5100BN Protective Film Plastic Shell LCD Touch Screen
- Model
- HMI5100BN
Item specifics
- Warranty
- 365 Days
- Shipping
- 2-4 workdays
- Brand
- Weinview
- Product Line
- Basic HMIs
- Supply Parts
- Overlay Touch Membrane LCD Case
- Size
- 10.1''
- Touch Type
- Resistive
Review
Description
Weinview Basic HMIs HMI5100BN Front Cover, Back Cover, Protective Film, LCD Display, Touch Screen, Gasket, Screws, Mounting Brackets and Power Supply Connector Replacement
Order each part separately is available
Safety Instructions
1. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible
2. Keep Weintek Weinview Basic HMIs HMI5100BN Mounting Brackets, Plastic Shell, Power Supply Connector, Touch Panel, LCD Screen, Screws, Gasket and Protective Film away from humidity.
3. Put HMI5100BN HMI Case, Protective Film, MMI Panel Screen, Power Supply Connector, Screws, LCD Display, Mounting Brackets and Gasket on a reliable surface during installation. Dropping it or letting it fall may cause damage.
4. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet.
5. Never open the whole equipment. For safety reasons, the equipment should be opened only by qualified service personnel.
6. Position the power cord so that people cannot step on it. Do not place anything over the power cord.
7. Never pour any liquid into Weinview HMI HMI5100BN Protective Film, Touch Screen, Front Cover, Gasket, LCD Panel, Back Cover, Mounting Brackets, Power Supply Connector and Screws. This may cause fire or electrical shock.
8. Read these safety instructions carefully in order to protect HMI5100BN Gasket, Protective Film, Touch Screen, LCD Display, Back Cover, Front Cover, Screws, Mounting Brackets and Power Supply Connector.
Specifications:
The table below describes the parameters of the Weinview Basic HMIs HMI5100BN HMI Repair Parts.
| Operating Temperature: | 32° ~ 122°F (0° ~ 50°C) |
| Touch Type: | Resistive |
| Brand: | Weinview |
| Storage Temperature: | -4° ~ 140°F (-20° ~ 60°C) |
| Light Transmission: | Above 80% |
| Product Line: | Basic HMIs |
| Enclosure: | Plastic |
| Resolution: | 1024 x 600 Pixels |
| Warranty: | 365 Days |
| Environment: | Free From Corrosive Gases |
Related Weinview HMI No. :
| Weinview HMI | Description | Inventory status |
| HMI5040B | Weinview Basic HMIs Housing Touch Digitizer LCD Overlay Replacement | In Stock |
| HMI5040BN | Weinview Basic HMIs LCD Protective Film Case Cover Touch Screen Glass Repair | Available Now |
| HMI5056N | Weinview Basic HMIs Touch Screen Glass Front Overlay Replacement | In Stock |
| HMI5070BN HMI5070B | Weinview Basic HMIs Touch Digitizer Protective Film Repair | Available Now |
| HMI5070ETH | Weinview Basic HMIs Front Overlay Touch Digitizer Glass Replacement | In Stock |
| HMI5070NH | Weinview Basic HMIs Touch Screen Tablet Protective Film Repair | Available Now |
| HMI5070TH | Weinview Basic HMIs Touch Screen Monitor Front Overlay Replacement | In Stock |
| HMI5100B | Weinview Basic HMIs Touch Screen Glass Shell Cover LCD Protective Film Repair | Available Now |
| HMI5100BN | Weinview Basic HMIs LCD Protective Film Touch Membrane Enclosure Replacement | In Stock |
| Weinview HMI | Description | Inventory status |
Weinview HMI Manuals PDF Download:
FAQ:
Question: How can I protect the Weinview HMI5100BN MMI Spare Parts?
Answer:
• Avoid Direct Sunlight: Keep the touch screen out of prolonged exposure to direct sunlight, which can cause overheating and degrade the screen material over time.
• Moisture Protection: Ensure the device is stored in a dry environment. High humidity or condensation can lead to damage, including electrical short circuits and screen malfunction.
Question: Can I connect external devices to the Basic HMIs HMI?
Answer: Yes, the Basic HMIs HMIs typically offer various communication ports, such as Ethernet, USB, RS232, or RS485. These ports allow you to connect external devices, such as PLCs, sensors, or other control equipment, for data exchange and system integration.
Common misspellings:
HMI100BN
HMI5i00BN
HMI5100BBN
HMI1500BN
HM15100BN
