IPC477D PRO 6AV7250-3BC07-0HA0 Touch Digitizer Glass Repair
IPC477D PRO 6AV7250-3BC07-0HA0 Touch Digitizer Glass Repair
Model
6AV7250-3BC07-0HA0

Item specifics

Touch screen panel type
Capacitive touch screen
Size
15.6 inch
Brand
Siemens
Warranty
365 Days
Product Number
6AV72503BC070HA0
Product Line
SIMATIC IPC 477D PRO Series

Review

Description

SIMATIC IPC477D PRO 6AV7250-3BC07-0HA0 Touch Screen Panel Replacement Repair


Siemens IPC477D PRO 6AV7250-3BC07-0HA0 Touch Screen Panel Replacement

The SIMATIC IPC477D PRO 6AV72503BC070HA0 Touch Digitizer HMI stands out as an exceptional industrial Human-Machine Interface (HMI) solution meticulously crafted to cater to the diverse needs of customers in industrial automation. Seamlessly integrating robust industrial computing with an intuitive interface, it empowers users to effortlessly oversee and manage production processes with precision. What sets it apart is its remarkable adaptability and scalability, allowing for tailor-made configurations to suit the unique demands of various industrial settings.


Renowned for its superior performance and steadfast operation, the SIMATIC IPC477D PRO 6AV7250-3BC07-0HA0 touchscreen HMI thrives even in the harshest industrial conditions. Its formidable processing prowess and streamlined data transmission capabilities ensure swift and accurate access to production data for instantaneous analysis and informed decision-making. Furthermore, its rugged construction guarantees prolonged reliability, minimizing maintenance expenditures and downtime, thus furnishing customers with a dependable assurance of heightened production efficiency.


In essence, the SIMATIC IPC 477D PRO 6AV7 250-3BC07-0HA0 touch screen panel HMI transcends the realm of mere industrial Human-Machine Interface devices, embodying a pinnacle of customer-centric innovation. By harmonizing cutting-edge technology with user-centric design, it delivers to customers solutions that are not only dependable, flexible, and efficient but also resonate deeply with their operational needs and aspirations, facilitating the optimization and elevation of their production processes.


VICPAS supplies 6AV7 250-3BC07-0HA0 touch panel glass with VICPAS 365 days warranty and supports Urgent Worldwide Shipping.





Specifications:

The table below describes the parameters of the Siemens IPC 477D PRO 6AV7250-3BC07-0HA0 Touch Membrane Parts.

Part Number: 6AV72503BC070HA0
Mounting Position: Vertical
Pitch: 0.5 mm
Warranty: 365 days Warranty
Touch Technology: Capacitive
Relative Humidity: 90%
Product Line: IPC477D PRO
Brand: Siemens
Operation Temperature: -10~+60°C
Storage Temperature: -20~+70°C


Related SIEMENS SIMATIC IPC477 HMI Part No. :

SIEMENS IPC 477 HMI Description Inventory status
6AV7241-1WA05-0FA0 SIMATIC IPC 477E Series Touch Screen Monitor In Stock
6AV7241-1WA07-0FA0 SIEMENS IPC 477E Series MMI Touch Screen Repair Available Now
6AV7241-3WB57-0DA0 SIMATIC IPC 477E Series Touch Digitizer Replacement In Stock
6AV7241-5WG07-0FA0 SIMATIC IPC 477E Series Touch Screen Replacement Available Now
6AV7250-3BC06-0HA0 SIMATIC IPC 477D PRO Touch Panel Replacement In Stock
6AV7250-3BC06-0PA0 SIEMENS IPC477D PRO Touch Digitizer Glass Repair Available Now
6AV7250-3BC07-0HA0 SIMATIC IPC 477D PRO Touch Screen Glass Repair In Stock
6AV7250-3CC07-0HA0 SIMATIC IPC477D PRO Touch Screen Panel Replacement Available Now
6AV7250-3CD07-0PA0 SIEMENS IPC 477D PRO Touch Membrane Repair Replacement In Stock
6AV7250-6CC07-0HA0 SIMATIC IPC477D PRO Touch Glass Replacement Available Now
SIMATIC IPC477 HMI Description Inventory status

SIMATIC IPC477 Series Manuals PDF Download:

  • SIEMENS 6AV7251-1DA55-0DA0 Datasheet PDF (en)
  • SIEMENS 6AV7251-3BA01-0DA0 Datasheet PDF (en)
  • SIEMENS 6AV7251-3BA04-0FA0 Datasheet PDF (en)
  • SIEMENS 6AV7251-3CA04-0FA0 Datasheet PDF (en)
  • SIEMENS 6AV7251-3CB00-0FA0 Datasheet PDF (en)
  • SIEMENS 6AV7251-3CB05-0FA0 Datasheet PDF (en)
  • SIEMENS 6AV7251-3DA05-0DA0 Datasheet PDF (en)
  • SIEMENS 6AV7251-3DA05-0DA0 Datasheet PDF (en)
  • ipc477d-pro_operating_instructions_enUS_en-US

  • FAQ:

    Question: How to mount the device?

    Answer:
    Prepared for support arm or stand without extension elements (flange on top)
    1. If an adapter plate for the Siemens base adapter is included in your support arm system, attach the adapter plate to the support arm with 4 M6x12 screws. Pay attention to the torque that is specified for the support arm.
    Prepared for support arm or stand without extension elements (flange on top)
    2. Attach the base adapter with 4 M6x12 screws to the mechanical interface of the support arm from below. Pay attention to the torque that is specified for the support arm.
    3. Remove the screws ⑤ of the terminal compartment cover.
    Prepared for support arm or stand without extension elements (flange on top)
    ① Support arm head
    ② Intermediate plate
    ③ Base adapter
    ④ Countersunk head screws for device
    ⑤ Screws for terminal compartment cover
    4. Open the terminal compartment cover ⑤ and set it aside safely.
    5. Insert all connection cables through the opening of the device.
    Make sure that the connecting cables are not damaged.
    Recommendation: Route large connectors (e.g. RS232 connectors) and their cables through the pedestal or support arm first.
    6. Attach the device with 4 M4x12 countersunk head screws to the base adapter ③ from the top, torque 2.5 Nm.
    Make sure that the connecting cables are not pinched.
    7. Connect all cables according to the description in the section Connecting the device.
    8. Fasten the cover plate ⑤ to the device with the 2 screws, torque 1.5 Nm.
    Check that the seal is sitting correctly.

    Prepared for support arm and extension elements (flange mount)
    The following description shows an example of how to attach the device to a support arm system using the optionally available Siemens flange mount ⑦. Mounting to a 48.3 mm round tube ⑧ that fits the opening of the device is performed in a similar fashion.
    Prepared for support arm and extension elements (flange mount)
    1. Remove the screws ⑤ of the terminal compartment cover.
    2. Open the terminal compartment cover and set it aside safely.
    Prepared for support arm and extension elements (flange mount)
    ⑤ Screws for terminal compartment cover
    ⑥ Setscrews
    ⑦ Flange mount (not included in the product package; see System components
    ⑧ Third-party round tube (∅ 48 mm)
    ⑨ Cover plate
    3. Grease the flange mount ⑦ or 48.3 mm round tube ⑧ with grease suitable for NBR seals, and insert the flange mount ⑦ or 48.3 mm round tube ⑧ into the corresponding opening of the device.
    Make sure that the sealing ring (O-ring) is not damaged. Fasten the flange mount with the 2 setscrews ⑥ M8x10 from the accessory kit.
    Observe the appropriate torque:
    – Siemens flange mount ⑦: 8 Nm
    – 48.3 mm round tube of steel ⑧: 8 Nm
    – 48.3 mm round tube of aluminum ⑧: 5 Nm
    Prepared for support arm and extension elements (flange mount)
    4. If an adapter plate ⑨ for the Siemens flange mount is included with your support arm, attach the adapter plate to the support arm with 4 M6x12 screws. Pay attention to the torque that is specified for the support arm.
    Prepared for support arm and extension elements (flange mount)
    5. Insert all connection cables through the opening of the flange mount or 48.3 mm round tube into the connection compartment of the device. Make sure that the connection cables are not damaged.
    6. Attach the device with 4 M6 screws, 16 mm to 20 mm long, to the support arm from below.
    The screws are not included in the product package of the device.
    Pay attention to the torque that is specified for the support arm.
    Make sure that all connecting cables are fed through the flange mount into the interior of the device without damage.
    7. Connect all cables according to the description in the section Connecting the device.
    8. Fasten the cover plate ⑤ to the device with the 2 screws, torque 1.5 Nm. Check that the seal is sitting correctly.
    9. Fasten the cover plate ⑨ from the device product package with 4 M4x12 screws, torque 1.5 Nm.
    Alternatively, you can extend the device by adding an Extension Unit at the bottom. Read the associated documentation.


    Question: What should I pay attention to during cleaning the Siemens IPC 477D PRO 6AV7250-3BC07-0HA0 HMI Touch Glass?

    Answer: If you clean the glass front when it is switched on, you may cause inadvertent operations via the IPC477D PRO 6AV72503BC070HA0 Touchscreen. Switch off the HMI device during cleaning.

    Common misspellings: 

    AV7250-3BC07-0HA0
    6AV7250-3CB07-0HA0
    6AV7250-3BC07-0A0
    6AV72503-BC07-0HA0
    6AAV7250-3BC07-0H0