IDEC HG2A-SB22CT MMI Touch Glass Replacement
- Model
- HG2A-SB22CT
Item specifics
- Warranty
- 365 Days
- Shipping
- 2-4 workdays
- Brand
- IDEC
- Supply Parts
- Touch Membrane
- Size
- 5.7 inches
Review
Description
IDEC HG2A Series HG2A-SB22CT Touch Screen Monitor Replacement
Protective Sheet of IDEC HG2A-SB22CT Touchscreen
1. Wipe any dirt off the display using a soft cloth slightly dampened with neutral detergent or alcoholic solvent.
2. Remove the back sheet of the protective sheet.
3. The tab of the protective sheet should be positioned at lower left. Align the right side of the protective sheet with that of the HG2A-SB22CT Touch Screen Display, then apply the protective sheet onto the display. Care should be taken to avoid ingress of air.
4. On the top of protective sheet, a thin cover sheet is applied to prevent the protective sheet from being damaged during transportation. Remove it before using the HG2A-SB22CT HMI Touch Glass.
5. When a protective sheet gets dirty or damaged, replace the protective sheet with a new one. When replacing the sheet, remove the used adhesives completely. The Protective Sheet has no protection effect against chemicals. HG2A-SB22CT Touch Membrane has used a special material to filter out UV rays, however no warranty is given as to be installed in direct sunlight of outside.
6. Make sure that the specifications of the product conform to your requirements, and that no parts are missing or damaged due to accidents during transportation.
Mounting Caution
If the mounting clips are tightened obliquely to the panel, the HG2A-SB22CT HMI Panel Screen may fall off the panel. When installing the IDEC HG2A into a panel cut-out, make sure that the gasket is not twisted especially when re-installing, take special care because any twists in the gasket will impair the waterproof characteristics.
Specifications:
The table below describes the parameters of the IDEC HG2A Series HG2A-SB22CT Touch Screen Panel HMI.
| Product Line: | HG2A Series |
| Operating Humidity: | 20 to 85% RH |
| Degree of Protection: | IP65 |
| Storage Temperature: | -20 ~ 60°C |
| Display Type: | TFT Color |
| Screen Type: | Analog Resistive Film |
| Model Number: | HG2A-SB22CT |
| Operating Temperature: | 0 ~ 50°C |
| Warranty: | 1-Year Warranty |
| Brand: | IDEC |
Related IDEC HMI No. :
| IDEC HMI | Description | Inventory status |
| HG2A-SB22BF | IDEC HG2A Series Touch Screen Panel Replacement | In Stock |
| HG2A-SB22CF | IDEC HG2A Series Touch Digitizer Glass Repair | Available Now |
| HG2A-SB22JF | IDEC HG2A Series Touch Screen Glass Repair | Available Now |
| HG2A-SB22VF | IDEC HG2A Series Touch Screen Display Replacement | In Stock |
| HG2A-SS22BF | IDEC HG2A Series HMI Panel Screen Repair | Available Now |
| HG2A-SS22CF | IDEC HG2A Series Touchscreen Monitor Replacement | In Stock |
| HG2A-SS22CT | IDEC HG2A Series Touch Screen Film Repair | Available Now |
| HG2A-SS22JF | IDEC HG2A Series Touch Screen Tablet Replacement | In Stock |
| HG2A-SS22VF | IDEC HG2A Series HMI Touch Glass Repair | Available Now |
| IDEC HMI | Description | Inventory status |
IDEC HG2A Series Manuals PDF Download:
FAQ:
Question: Can I connect external devices to the HG2A-SB22CT HMI?
Answer: Yes, the HG2A-SB22CT HMIs typically offer various communication ports, such as Ethernet, USB, RS232, or RS485. These ports allow you to connect external devices, such as PLCs, sensors, or other control equipment, for data exchange and system integration.
Question: What is the size of the base screen of HG2A-SB22CT Terminal?
Answer: It is equal the size of HG2A-SB22CT touch screen.
Common misspellings:
G2A-SB22CT
HG2ASB22CT
HHG2A-SB22CT
HG2AS-B22CT
HG2A-SB22TC
