IDEC FT1A-M12RA-B Touch Screen Display Replacement
- Model
- FT1A-M12RA-B
Item specifics
- Warranty
- 365 Days
- Shipping
- 2-4 workdays
- Brand
- IDEC
- Supply Parts
- MMI Touch Panel Screen
- Display Size
- 3.7 inches
Review
Description
IDEC FT1A 3.8IN PLC+HMI FT1A-M12RA-B HMI Panel Screen Replacement
Screen Types of IDEC FT1A-M12RA-B Touch Panel
1. Base Screen: The screen that is displayed when the Touch is in Run Mode. Drawing objects and functional parts can be created mainly on this screen which is displayed on the FT1A-M12RA-B Touchscreen.
2. Popup Screen: The Popup Screen that is displayed on the Base Screen when the FT1A-M12RA-B Touch Screen Monitor is in Run Mode. The size and coordinates of the screen can be specified and this screen can also be moved on the Base Screen.
3. Library Screen: The screen that registers often used drawing objects and parts to the set WindO/I-NV3. References the registered screen while the project is being edited and can copy and appropriate drawing objects and parts from the screen.
4. Maintenance Screen: Using the screen that is displayed when the IDEC FT1A-M12RA-B Touch Membrane is in Run Mode, you can switch from Run Mode to System Mode and load a screen to adjust Device Monitor and screen brightness.
Features for the FT1A-M12RA-B Touch Screen Glass
The Touch is high-performance programmable controller in a compact package and is equipped with high speed counters. The Touch enables you to build optimum systems to automate factories or control production lines.
The FT1A-M12RA-B Touch Panel is equipped with an LCD and the same display functions as the MICRO/I. You can monitor and modify values of devices and monitor basic instructions. Also, by creating screens and programming control functions, you can display the current time, bar charts, scrolling messages, or simple text on the LCD screen.
Specifications:
The table below describes the parameters of the IDEC FT1A 3.8IN PLC+HMI FT1A-M12RA-B Touch Digitizer Glass HMI.
| Brand: | IDEC |
| Operating Humidity: | 10 to 90% RH |
| Product Line: | FT1A 3.8IN PLC+HMI |
| Corrosion Immunity: | Free from corrosive gases |
| Operating Temperature: | -20 ~ 60°C |
| Storage Temperature: | -20 ~ 70°C |
| Degree of Protection: | IP65 |
| Warranty: | 1-Year Warranty |
| Display Size: | 3.7" |
| Display Type: | 256 Color LCD |
Related IDEC FT1A 3.8IN PLC+HMI No. :
| FT1A 3.8IN PLC+HMI | Description | Inventory status |
| FT1A-C12RA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Panel Replacement | In Stock |
| FT1A-C12RA-S | IDEC FT1A 3.8IN PLC+HMI Touch Digitizer Glass Repair | Available Now |
| FT1A-C14KA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Film Replacement | In Stock |
| FT1A-C14KA-S | IDEC FT1A 3.8IN PLC+HMI Touch Screen Glass Repair | Available Now |
| FT1A-C14SA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Display Replacement | In Stock |
| FT1A-C14SA-S | IDEC FT1A 3.8IN PLC+HMI MMI Panel Screen Repair | Available Now |
| FT1A-M12RA-S | IDEC FT1A 3.8IN PLC+HMI Touch Screen Tablet Repair | Available Now |
| FT1A-M14KA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Film Replacement | In Stock |
| FT1A-M14KA-S | IDEC FT1A 3.8IN PLC+HMI HMI Touch Membrane Repair | Available Now |
| FT1A-M14SA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Glass Replacement | In Stock |
| FT1A-M14SA-S | IDEC FT1A 3.8IN PLC+HMI Touch Screen Panel Repair | Available Now |
| FT1A 3.8IN PLC+HMI | Description | Inventory status |
IDEC FT1A 3.8IN PLC+HMI Manuals PDF Download:
FAQ:
Question: How can I create and modify screens on the FT1A-M12RA-B HMI?
Answer: FT1A-M12RA-B HMI usually comes with dedicated software for screen development. Install the software on your computer, and then use it to design and customize screens with elements like buttons, images, text, and data display. The software often offers intuitive drag-and-drop interfaces for easy screen creation and modification.
Question: How to install FT1A-M12RA-B Terminal?
Answer:
Common misspellings:
FTA-M12RA-B
FT1A-MM12RA-B
FT1A-M12RA--B
FT1A-M12R-AB
FT1A-M12AR-B
